大型碳化硅生产园区面源源强及减排指标核算

以某年产25万吨大型碳化硅园区无组织排放面源为例,提出基于多个地面站气象数据的CALPUFF模型地面浓度反推方法,优化流场模拟,使得无组织面源源强核算结果更加准确,并以环境保护目标空气质量达标为原则,核算其大气污染物减排指标,得出具体结论:园区大气污染物SO2、NOX、CO、PM10年排放量分别为449.06t、86.98t、5158.58t、115.06t;无组织排放SO2、CO及PM10的减排比例分别为63.5%、19.2%、42.44%,对应减排量分别为285.16 t/a、990.45 t/a、48.83 t/a。     

煤矿采空塌陷对地下水的影响

在煤炭开采过程中,煤炭被采出后其所在地下煤层会形成一定区域的采空区,并使煤层上方的顶板岩层失去支撑,由于顶板岩层的抗拉强度比较有限,因此在其顶板岩层自身重力与上覆岩层压力的影响下,很容易因顶板断裂、破碎而出现采空塌陷问题,这不仅会影响煤矿所在区域的生态安全,同时还会使地下水受到较大的负面影响。为此,本文结合煤矿采空塌陷的特点,围绕采空塌陷对地下水的影响展开了分析,并在此基础上提出了一些较为可行的采空塌陷区域地下水治理保护建议。     

环境检测中地表水检测现状及进展

地表水作为维持人类正常生产生活的重要资源,应作为环境监测的首要任务常抓不懈。现今对地表水的检测工作中仍存在较多不完善之处,应从环境保护的大局出发,应用合理的检测技术,将地表水检测工作提升到新的高度。本文分析了环境检测中地表水的检测现状,并提出了相应的解决措施。     

UiO-66(Zr)@多孔陶瓷复合材料的制备及对络合态重金属EDTA-Cu(Ⅱ)的去除

本文采用多孔陶瓷作为基体制备了锆基金属有机骨架UiO-66@多孔陶瓷复合材料.通过扫描电子显微镜(SEM)、粉末X射线衍射(PXRD)、氮气吸附和傅里叶变换红外光谱(FTIR)等表征手段对比了氢氧化钠脱硅和乙二胺表面改性等基体活化方式对UiO-66(Zr)在多孔陶瓷表面负载情况的影响.结果表明,经过乙二胺表面改性的多孔陶瓷对UiO-66(Zr)的负载更均匀,负载效果更好.以EDTA-Cu(Ⅱ)为考察对象,研究了UiO-66(Zr)@乙二胺表面改性多孔陶瓷复合材料对络合态重金属的净化效能.结果表明,UiO-66(Zr)@多孔陶瓷复合材料在较宽的酸碱条件下(pH=3—9)对络合态重金属EDTA-Cu(Ⅱ)均表现出良好的吸附性能,饱和吸附量为1.17 mg·g~(-1),并可通过NaOH解吸再生,从而实现材料的重复利用.     

Scenario-based assessment and multi-objective optimization of urban development plan with carrying capacity of water system

• Impact of urban development on water system is assessed with carrying capacity. • Impacts on both water resource quantity and environmental quality are involved. • Multi-objective optimization revealing system trade-off facilitate the regulation. • Efficiency, scale and structure of urban development are regulated in two stages. • A roadmap approaching more sustainable development is provided for the case city. Environmental impact assessments and subsequent regulation measures of urban development plans are critical to human progress toward sustainability, since these plans set the scale and structure targets of future socioeconomic development. A three-step methodology for assessing and optimizing an urban development plan focusing on its impacts on the water system was developed. The methodology first predicted the pressure on the water system caused by implementation of the plan under distinct scenarios, then compared the pressure with the carrying capacity threshold to verify the system status; finally, a multi-objective optimization method was used to propose regulation solutions. The methodology enabled evaluation of the water system carrying state, taking socioeconomic development uncertainties into account, and multiple sets of improvement measures under different decisionmaker preferences were generated. The methodology was applied in the case of Zhoushan city in South-east China. The assessment results showed that overloading problems occurred in 11 out of the 13 zones in Zhoushan, with the potential pressure varying from 1.1 to 18.3 times the carrying capacity. As a basic regulation measure, an environmental efficiency upgrade could relieve the overloading in 4 zones and reduce 9%‒63% of the pressure. The optimization of industrial development showed that the pressure could be controlled under the carrying capacity threshold if the planned scale was reduced by 24% and the industrial structure was transformed. Various regulation schemes including a more suitable scale and structure with necessary efficiency standards are provided for decisionmakers that can help the case city approach a more sustainable development pattern.     

Transformation of hazardous lead into aluminosilicate ceramics: structure evolution and lead leaching

This study investigated crystallization mechanisms for the formation of lead aluminosilicate by sintering lead stabilization with kaolin-based precursors. PbAl2Si2O8 was found to be the only stable lead aluminosilicate in low-PbO system and demonstrates its highly intrinsic resistance to acid attack in leaching test. A three-stage PbAl2Si2O8 formation mechanism was supported by the results of the changing temperature in the system. Amorphization of sintered products was observed in both PbO/kaolinite and PbO/mullite systems at 600–700°C. When the temperature was increased to 750–900°C, the crystallochemical formation of lead aluminosilicates (i.e., Pb4Al4Si3O16, Pb6Al6Si2O21, and PbAl2Si2O8) was observed. Pb4Al4Si3O16 and Pb6Al6Si2O21 were found to be the intermediate phases at 700–900°C. Finally, PbAl2Si2O8 was found to be the only crystallite phase to host Pb at above 950°C. A maximum of 80% and 96.7% Pb can be incorporated into PbAl2Si2O8 in PbO/kaolinite and PbO/mullite systems, respectively, but the final products exhibited different microstructures. To reduce environmental hazard of lead, this strategy demonstrated a preferred mechanism of immobilizing lead into PbAl2Si2O8 structure via kaolin-based precursors.     

Molecular,functional, and cellular alterations of oocytes and cumulus cells induced by heat stress and shock in animals

Environmental Science and Pollution Research - Global warming is considered as the main environmental stress affecting ecosystems as well as physiological and biochemical characteristics, and...     

一起800kV罐式断路器内部故障原因分析

介绍了一起某变电站7530断路器内部闪络故障,结合现场检查、电气试验、故障录波情况确认故障点,通过气体成分及放电产物分析、故障部件电场仿真等手段综合分析800 kV罐式断路器故障原因,并提出了处理措施及建议。     

基于源网荷互动的分布式能源消纳方法

分布式能源发电的不确定性给电网公司消纳新能源带来了极大的挑战,电力物联网全域感知技术为分布式能源消纳提供了有效的数据支撑,故提出了一种基于源网荷互动的分布式能源消纳方法,构建了分布式能源总功率预测方法,采用自回归移动平均算法对新能源发电功率进行预测,并建立分布式能源发电波动影响因子,分析新能源发电波动对电网带来的影响。根据源网荷的互动情况,采用离群点自趋优算法,实现新能源机组有功功率精准控制,有效推动分布式能源的消纳。仿真验证表明：采用离群点自趋优的新能源机组控制算法能根据电网运行情况,自动调控分布式能源、电网资源,实现分布式能源最大化消纳,有效提高了园区分布式能源的经济运行水平。     

基于暂态零序电流法的站内电缆监测系统及验证试验

及时发现变电站内电力电缆的故障对保证变电站安全稳定运行具有重要意义。介绍了1种基于暂态零序电流法的站内电缆监测系统,对系统的监测原理和各部件参数要求进行了论述,并采用单相失压模拟试验和人工单相接地试验对电缆线路监测系统进行了验证。试验结果表明,该系统可以准确地采集电缆线路故障发生时的暂态零序电流,并能及时将故障报警信息上报运维人员,保证变电站安全稳定运行。