Alignment of the Lumbar Vertebrae in a Driving Posture

The purpose of this study was to define the anatomical arrangement of the lumbar spine in the mid-body sagittal plane of a human volunteer while in three postures: a driving posture; full flexion; and full extension. Radiographic images of the lumbar spine were made of a 33-year old 50th percentile male subject seated in a comfortable driving posture. Additional radiographs were made of the lumbar spine while the subject was postured in full voluntary flexion, and full voluntary extension. Anterior and posterior mid-sagittal vertebral endplate positions were plotted on an x-y coordinate system for each posture. Anterior and posterior disk thicknesses, and the positions of the centers of each vertebra were numerically determined using information from the plots. Disk thicknesses were then graphed and comparisons made for each posture. The arrangements of the centers of vertebrae were graphed and compared for the three different postures. The arrangement of the lumbar vertebrae tended toward that of full voluntary flexion while the subject was in a normal driving posture. Anterior disk thickness was a sensitive indicator of posture, while posterior disk thickness was not. While in a driving posture, the lower back approximated a straight-line that was nearly parallel to the seat back axis. The observations support those of an earlier study. Since soft tissue spinal elements can only be damaged by applying tensile forces in excess of their tolerance, the anterior elements of the lumbar spine would not be directly threatened in low velocity frontal collisions, since anterior elements would be in relative compression. Tension injury to the anterior structures as a result of a rear-end collision would first require reversing the preimpact conditions imposed by the normal driving posture. Tension injury to the posterior spinal elements resulting from low velocity rear-end collisions would be unlikely since axial compression loading would also diminish tension stress in posterior soft tissue structures. Any compression injury to posterior elements resulting from rear-end collisions would first require reversing the pre-impact conditions imposed by the normal driving posture.     

Methodological aspects of a national population-based study of persistent organochlorine compounds in serum

Key methodological aspects are presented for a study of concentrations of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), polychlorinated biphenyls (PCBs), and organochlorine pesticides in the serum of a sample of the New Zealand population aged 15 years and older. The study took advantage of the sampling frame and sample collection and interview processes of the National Nutrition Study (NNS). An additional blood sample for this organochlorines study was collected by the NNS and questions added to the NNS questionnaire. Serum was obtained from the blood and, based on responses to questions in the questionnaire, samples with possible occupational exposure to organochlorines were excluded. Remaining samples providing at least 2 ml of serum were pooled within 80 strata defined according to geographic area, age group, sex and ethnicity. A minimum number of five individual serum samples was required for pooling within a stratum. Within strata with sufficient samples, two or three pooled samples were created for variance calculation. Eligible for inclusion in the study were 2497 individual serum samples. Sixty strata had sufficient serum samples for pooling and chemical analysis. This was the first study of organochlorine compounds with a national population-based sample. Two factors that made the study feasible deserve emphasis. First, being able to "piggy-back" on another study. Second, pooling of samples to reduce analytic expenses. It is hoped that the methods used in this study will form the basis for other studies investigating organochlorine concentrations in national populations.     

Assessing stock and change in land cover and biodiversity in GB: an introduction to Countryside Survey 2000

Countryside Survey 2000 (CS2000) is the latest in a series of surveys designed to measure and evaluate stock and change of land cover, landscape features, freshwaters, habitats and the vegetation of Great Britain. The ideas behind CS2000 developed during the 1960s and 1970s and culminated in the first survey of vegetation and land cover in 1978. One kilometer sample squares were selected at random using an environmental stratification. Subsequent surveys took place in 1984, 1990 and 1998, revisiting the original sample locations, whilst progressively expanding in scope and sample size; CS2000 included soils, breeding birds, remotely sensed imagery, freshwater biota and hydromorphology. Countryside Survey data may be interpreted using the pressure-state-response model, by selecting indicators of process and quality, and by identifying models of expected responses to different pressures. Thus, results showing losses of hedgerows between 1984 and 1990 stimulated new protection for these features. Ideally, CS2000 data should be used to stimulate experiments to distinguish between different pressures, in order to ensure that policy and management responses are both appropriate and achievable.The experience from CS2000 may prove helpful for the design and management of other large scale monitoring programmes of ecosystems. In particular, the scope of the survey, and the use to which the data are applied, have evolved through time, and yet continuity was essential for change to be detected efficiently. These objectives were reconciled by collecting the data in a disaggregated form, allowing a high degree of flexibility in both analysis and reporting.     

Estimating the extent and change in Broad Habitats in Great Britain

A stratified random sample of kilometre squares in Great Britain was visited and completely mapped using four areal themes (agriculture and semi-natural vegetation, forestry, physiography and buildings and communications). The maps were digitised and the attribute information recorded to produce an electronic database. Information was summarised by square and then bootstrap re-sampling techniques were used to produce national estimates with statistical confidence intervals. The results for 1998 showed the terrestrial Broad Habitats had a range in extent covering two orders of magnitude from Montane (49000ha) to Improved Grassland (5482000ha). Just under half of Britain is covered by agricultural Broad Habitats, about 12% by woodland and just under 10% by Urban Habitats. The remaining quarter of the land area is covered by semi-natural Broad Habitats. By revisiting the same sample of squares previously visited in 1990, changes in the quantity and quality of the Broad Habitats have been determined. Significant increases in area have occurred in the Broadleaved, Mixed and Yew Woodland and Built Up and Gardens. The largest areal reduction was in Acid Grassland although that was in part balanced by a gain in Fen, Marsh and Swamp. The most significant ecological loss was in the area of Calcareous Grassland. The consequences of having different sample sizes for the different years are discussed.     

The use of isotope dilution mass spectrometry for the certification of standard reference materials

Isotope dilution mass spectrometry (IDMS) has been used extensively at the U.S. National Bureau of Standards as an accurate method to determine trace element concentrations in natural materials. Thermal ionization mass spectrometry is a single element technique capable of high accuracy and precision, and has been used for “definitive” measurements of trace elements in sera with 95% confidence limits less than 0.25%. Spark source mass spectrometry is a complementary multielement, high-sensitivity technique that has been used to determine up to 20 elements in a sample, with typical accuracies of 2%–5%. Together with appropriate chemical separations, such as anion and cation exchange, chelate resins, electrodeposition, and chemical extraction, IDMS has been applied to elemental concentration measurements ranging over eight orders of magnitude, from decigrams/gram to picograms/gram. Many of these applications have been used for the certification of a broad spectrum of biological and environmental Standard Reference Materials, including lead in Trace Elements in Water (SRM 1643), 15 elements in Coal Fly Ash (SRM 1633a), uranium in Bovine Liver (SRM 1577a), and mercury in water (SRM 1642).     

Improved parameters for risk estimation in Down's syndrome screening

A new method is described for calculating maternal serum marker distribution parameters which will improve risk estimation when screening for Down's syndrome. The approach is to calculate parameters using data from the local screened population and data obtained by meta-analysis from all published studies. The local data are used to derive the variance and covariance in unaffected pregnancies. The meta-analysis is used for the mean level in Down's syndrome pregnancies together with the differences in variance and covariance between affected and unaffected pregnancies. Forty-four published studies were analysed. The mean level for Down's syndrome in multiples of the normal median was 0·73 for alpha-fetoprotein (AFP) in total of 1140 pregnancies, 0·73 for unconjugated oestriol (uE₃) in 613, 2·02 for human chorionic gonadotropin (hCG) in 850, and 2·30 for free β-hCG in 477. For all four markers, the variance in Down's syndrome was higher than in unaffected pregnancies; for AFP and uE₃, the covariances were also higher in Down's syndrome, but for the other markers they were lower. The method was illustrated using data from 6387 pregnancies screened in Leeds.     

Computer estimation of the Atmospheric gas-phase reaction rate of organic compounds with hydroxyl radicals and ozone

The Atmospheric Oxidation Program (AOP) is a computer program that estimates the rate constant for the atmospheric, gas-phase reaction between photochemically produced hydroxyl radicals (OH) and organic chemicals. It also estimates the rate constant for the gas-phase reaction between ozone and olefinic/acetylenic compounds. AOP, which uses estimation methods developed by Atkinson and co-workers, estimates more accurate rate constants than the PCFAP (Fate of Atmospheric Pollutants) program that was part of the U.S. EPA's Graphical Exposure Modeling System (GEMS). Due to its superior predictive ability, the EPA is currently using AOP to evaluate the atmospheric fate of compounds defined under Sections 4, 5 and 6 of the Toxic Substances Control Act (TSCA).