清洁发展机制项目运作关键问题分析与管理对策研究

清洁发展机制（CDM）项目要想能够顺利通过一系列审查并最终获得减排量,需要特别重视项目运作流程中的关键环节。针对中国CDM项目审批数量少,通过率低,耗费时间长等问题,本文在分析CDM内涵及项目运作流程的基础上,指出了中国CDM项目运作中面临的主要问题,提出了相应的管理对策与建议,期望能够为中国推进CDM项目实施提供帮助。     

有机毒害物急性毒性与藻红外辐射变化研究

基于微生物检测毒害物质的重要性和选材困难对其检测技术发展的制约,开展了有机毒害物急性毒性与藻红外辐射变化研究。试验使用便携式红外测温仪测试一定量藻液中分别加入不同种有机药剂前后的温度变化。结果表明,8种藻对10种有机毒害物毒性可产生红外辐射变化的快速响应,平均最大温差的平均值为0.15℃,平均响应时间为4.4min;羊角月牙藻最大响应温差为0.27℃,响应相对明显,为8种藻中的毒性响应敏感藻。不同浓度有机药剂分别与敏感藻进行试验,明确敏感藻可检测出的最低药剂浓度,结果表明:同类毒害物质的响应灵敏度与发光细菌相同。     

宿迁市公众环境意识调查研究

采用问卷调查与社会访问相结合的方法,对江苏省宿迁市居民的环境意识进行了调查。统计结果表明宿迁市居民对当地环境处于基本满意阶段,并认为政府对环境保护工作比较重视;宿迁市公众具备了一定的环境保护基础知识．但是环境意识比较低,环境保护行为相对滞后,需要政府加以引导,加强环境宣传教育,提高民众的环境意识。     

A mini-microbial fuel cell for voltage testing of exoelectrogenic bacteria

Current methods for testing the electricity generation capacity of isolates are time- and labor-consuming. This paper presents a rapid voltage testing system of exoelectrogenic bacteria called Quickscreen, which is based on a microliter microbial fuel cell (MFC). Geobacter sulfurreducens and Shewanella baltica were used as the model exoelectrogenic bacteria; Escherichia coli that cannot generate electricity was used as a negative control. It was found that the electricity generation capacity of the isolates could be determined within about five hours by using Quickscreen, and that its time was relatively rapid compared with the time needed by using larger MFCs. A parallel, stable, and low background voltage was achieved using titanium as a current collector in the blank run. The external resistance had little impact on the blank run during the initial period. The cathode with a five-hole configuration, used to hydrate the carbon cathode, gave higher cathode potential than that with a one-hole configuration. Steady discharge and current interrupt methods showed that the anode mostly contributed to the large internal resistance of the Quickscreen system. However, the addition of graphite felt decreased the resistance from 18 to 5 kΩ. This device was proved to be useful to rapidly evaluate the electricity generation capacity of different bacteria.     

Selective sorption of perfluorooctane sulfonate on molecularly imprinted polymer adsorbents

Perfluorooctane sulfonate (PFOS), as a potential persistent organic pollutant, has been widely detected in water environments, and has become a great concern in recent years. PFOS is very stable and difficult to decompose using conventional techniques. Sorption may be an attractive method to remove it from water. In this study, the molecularly imprinted polymer (MIP) adsorbents were prepared through the polymerization of 4-vinylpyridine under different preparation conditions in order to remove perfluorooctane sulfonate (PFOS) from water. The MIP adsorbents using perfluorooctanoic acid (PFOA) as the template had good imprinting effects and could selectively remove PFOS from aqueous solution. The sorption behaviors including sorption kinetics, isotherms, and effect of pH, salt, and competitive anions were investigated. Experimental results showed that the sorption of PFOS on the MIP adsorbents was very fast, pH-dependent, and highly selective. The achieved fast sorption equilibrium within 1 h was attributed to the surface sorption on the fine adsorbents. The sorption isotherms showed that the sorption selectivity of PFOS on the MIP adsorbents decreased at high PFOS concentrations, which may be due to the double-layer sorption and the formation of PFOS micelles on the sorbent surface. The sorption of PFOS on the MIP adsorbents was mainly dominated by the electrostatic interaction between the protonated vinylpyridine on the adsorbent surface and the anionic PFOS. The prepared MIP adsorbents can potentially be applied in water and wastewater treatment for selective removal of PFOS.     

FIA技术在水质监测分析中的应用

通过使用Lachat流动注射分析仪测定环境水样中的四个常规项目总磷、总氮、挥发酚和总氰来介绍兀A技术在水质分析领域的应用。实验结果表明,各项目的标样测定值均在保证值范围之内,相对标准偏差在0．2％-3．7％之间。方法的精密度及准确度较好,加标回收率在91％-102％之间,满足水质监测实验室质量控制的要求。     

流动注射法测定水中高锰酸盐指数的研究

研究了用流动注射分析技术测定水体中高锰酸盐指数。使用新发明的耐腐蚀恒流泵、低记忆高效混合器、不存留气泡流通池等部件,通过高温高压,缩短消解时间,从而建立了一种可用于无人值守的自动在线快速监测水体中高锰酸盐指数的分析方法。通过实验研究了流动注射法测定水中高锰酸盐指数的优越性。对方法的检出限、精密度和准确度进行了测定,并与GB／T11892—89《水质高锰酸盐指数的测定》进行了比对,取得了满意的结果。     

蛭石吸附及解吸锌离子特性研究

用蛭石对锌离子的吸附解吸进行了实验研究,初步探讨了其对锌离子吸附解吸的机理。研究结果表明：蛭石对Zn^2＋具有较强的吸附能力,吸附在8h左右接近平衡。随着锌离子浓度的增加,蛭石的吸附量也在逐渐增加,当锌离子浓度达到400mg／L时,吸附量趋于平稳。在完成吸附实验的基础上,分别采用过滤和取上清液的方法解吸,实验证明静置平衡后,取出上清液50ml,再加入50ml解吸剂的方法解吸效果较好;解吸时间在0h到12h,蛭石的解吸量呈现递增的趋势,且达到1．070mg／g;在12h到48h内,解吸量基本没有增加,其中在24h时达到最大解吸量1．074mg／g。不同的解吸剂对蛭石解吸锌离子影响效果不同：蒸馏水不能使锌离子解吸;K^＋的影响作用相对于Na^＋更明显,随着两种阳离子浓度的增加,蛭石的解吸量逐渐增加。     

新生产空调客车内挥发性有机物浓度水平和来源分析

选取某厂家新生产的、下线时间不超过28d的53座新空调客车,在车辆处于静止状态下采用二次热解析-毛细管气相色谱/质谱联用法测量新空调车内挥发性有机物的分布特征和浓度水平.根据NIST02标准谱图进行匹配检索,结合色谱保留时间定性,共定性检出33种挥发性有机物,包括烷烃(15种、45.4%)、芳香类化合物(9种、27.3%)、醇(4种、12.1%),酮(3种、9.1%)、酯(2种、6.1%),且大多集中在C6～C10的范围内.新车内浓度最高的前5种挥发性有机物分别为癸烷(8.01 mg/m3)、3-甲基己烷(7.10mg/m3)、庚烷(5.10mg/m3)、异庚烷(4.20 ms/m3)和1-甲基,3-乙基苯(3,56 mg/3),总挥发性有机物TV012,52.5mR/m3.烷烃主要来源于空调车内部保温材料如聚氨酯(PU)发泡海绵或者聚乙烯(PE)发泡材料的释放,而车内检出的芳香族化合物主要来自汽车内饰用胶粘剂、密封胶等的释放.     

几种医疗垃圾处理技术综述

医疗废物是一类危害极大的特殊废物。自20世纪50年代起,医疗废物的处理已引起世界各国的广泛重视。目前,国内外学者对医疗废物处理技术的研究日益丰富,已经取得了一定的研究成果。在此基础上,通过综合比较焚烧处理、高压蒸汽灭菌处理、化学处理、微波处理、热解处理等几种医疗废物处理技术,综合评定了各种处理工艺的技术参数及优缺点,最后比较分析得出了高温热解法具有多方面的优点,是目前国内外首推的医疗废物处理技术。