Uncertainty analysis using a fugacity-based multimedia mass-balance model: Application of the updated EQC model to decamethylcyclopentasiloxane (D5)

The EQuilibrium Criterion (EQC) model developed and published in 1996 was recently revised to include improved treatment of input partitioning and reactivity data, temperature dependence and an easier sensitivity and uncertainty analysis. This New EQC model was used to evaluate the multimedia, fugacity-based fate of decamethylcyclopentasiloxane (D5; CAS No. 541-02-6) in the environment over a temperature range of 1–25 °C. In addition, Monte Carlo uncertainty analysis was used to quantitatively determine the influence of temperature and input partitioning and reactivity data on the behavior of D5 under various emission scenarios. Results indicated that emission mode was the most influential factor determining the fate and distribution of D5 in the model environment. When emitted to air and soil, D5 partitioned to and remained in the air compartment where rates of removal from degradation and advection processes were relatively rapid. In contrast, D5 emitted to water resulted in a substantial mass fraction of D5 being accumulated in the sediment compartment, where rates of removal from degradation and advection processes were slow. The mass distributions and fate of D5 in the model environment were strongly influenced by multiple input parameters, including temperature, the mode of emission (especially emission rate to water), K_OC and half-life in air. As temperature decreased from 25 °C to 1 °C, K_OC and half-life in air became increasingly more influential such that the mass distribution of D5 increased in air and decreased in sediment, resulting in decreased overall persistence.     

Mitochondrial DNA evidence for rapid colonisation of the Indo–West Pacific by the mudcrab Scylla serrata

Scylla serrata (Forskål, 1775) is widely distributed throughout mangrove habitats of the Indo-West Pacific (IWP) coastal waters. This study investigated the phylogeographic distribution of S. serrata mitochondrial DNA haplotypes sampled throughout the species range. Adults were sampled from three west Indian Ocean locations (N?=?21), five west Pacific sites (N?=?28) and three sites from northern and eastern Australia (N?=?76). Temperature-gradient gel-electrophoresis and sequencing of 549 base pairs of a mtDNA gene (cytochrome oxidase 1) identified 18 distinct haplotypes. Haplotypes cluster into two clades separated by ?2% sequence-divergence. One clade is widespread throughout the IWP, the other is strictly confined to northern Australia. Genealogical assessment of sequenced haplotypes suggests that the historical spread of S. serrata throughout the IWP has occurred rapidly and recently (<1 million years before present) from a west Pacific origin. The fact that many locations contain a single unique haplotype suggests limited contemporary gene flow between trans-oceanic sites, and that recent historical episodes of population founding and retraction have both determined and affected the current distribution of S. serrata populations. Contrary to that reported for other widespread species of IWP taxa, there is no pattern of regional separation of Indian from Pacific Ocean populations. However, results do suggest a vicariant separation of northern Australian crabs prior to the IWP radiation. We speculate that this separation may have resulted in the formation of a new species of Scylla.     

Dose assessment for marine biota and humans from discharge of (131)I to the marine environment and uptake by algae in Sydney, Australia

Iodine-131 reaches the marine environment through its excretion to the sewer by nuclear medicine patients followed by discharge through coastal and deepwater outfalls. ¹³¹I has been detected in macroalgae, which bio-accumulate iodine, growing near the coastal outfall of Cronulla sewage treatment plant (STP) since 1995. During this study, ¹³¹I levels in liquid effluent and sludge from three Sydney STPs as well as in macroalgae (Ulva sp. and Ecklonia radiata) growing near their shoreline outfalls were measured. Concentration factors of 176 for Ulva sp. and 526 for E. radiata were derived. Radiation dose rates to marine biota from ¹³¹I discharged to coastal waters calculated using the ERICA dose assessment tool were below the ERICA screening level of 10 μGy/hr. Radiation dose rates to humans from immersion in seawater or consumption of Ulva sp. containing ¹³¹I were three and two orders of magnitude below the IAEA screening level of 10 μSv/year, respectively.     

Modelling small groundwater systems: experiences from the Braunton Burrows and Ainsdale coastal dune systems,UK

Coastal dunes are delicate systems that are under threat from a variety of human and natural influences. Groundwater modelling can provide a better understanding of how these systems operate and can be a useful tool towards the effective management of a coastal dune system, e.g. by identifying strategically important locations for flora and fauna and guiding the planning of management operations through predicting impacts from climatic change, sea level rise and land use management. Most dune systems are small, typically of the size 10–100 km², compared with inland groundwater systems. Applying conventional groundwater modelling approaches to these small systems presents a number of challenges due to the local scale of the system and the fact that the system boundaries (sea, drains, ponds etc.) are close to the main body of the aquifer. In this paper, two case studies will be presented using different modelling approaches to understand the groundwater balance in two dune systems in the UK. The studies demonstrate that, although conventional hydraulic models can describe the general system behaviour, a fuller understanding of the recharge mechanisms and system boundaries is needed to represent adequately system dynamics of small groundwater systems.     

Do remediation experts have what it takes to explain empirical uncertainty?

Words matter in risk communication, and experts’ choice of words is critical when remediation risks are being explained to nonexperts. In risk communication studies, communication gaps between experts and nonexperts are investigated but there is lack of primary research. An Australian project addresses this shortcoming through research into communication about the risks of contaminated land remediation, and this paper provides some of its findings. Seventeen experts completed a questionnaire about the meaning of some scientific terms, and analysis found that they have capacity to improve communication through their selection and use of language. When experts undertake risk communication, the language they use may increase or reduce communication gaps. When the topic is uncertainty about health risks, communication gaps about the extent of uncertainty may reduce the effectiveness of social engagement, leading to unintended consequences such as cost overruns. This situation makes for a good case study since remediation is about benefit as well as risk, and communication about benefit, while desirable, may not always be achievable. The study suggests how to improve risk communication by exploring the accuracy, clarity, and depth of expert language. It identifies attributes of language that can bridge gaps in knowledge and understanding and characterizes them as integration mechanisms. These are defined as knowledge forms and mental processes that support cooperation between different epistemic communities to achieve mutually agreed outcomes. Two integration mechanisms are suggested. Bridging content addresses communication gaps through the selection of content (what knowledge is selected). Bridging process addresses communication gaps through the use of language (how knowledge is explained). Bridging content and bridging process can be expressed through cognitive and experiential platforms, or a blending of both, so whether words are positioned in the science‐based or mental model of risk communication, a utility value can be found in their quality, whether reflected by accuracy or the power to communicate meaning.     

Determining the native/non-native status of newly discovered terrestrial and freshwater species in Antarctica - current knowledge, methodology and management action

Continental Antarctic terrestrial and freshwater environments currently have few established non-native species compared to the sub-Antarctic islands and other terrestrial ecosystems on Earth. This is due to a unique combination of factors including Antarctica's remoteness, harsh climate, physical geography and brief history of human activity. However, recent increases in national operator and tourism activities increase the risk of non-native propagules reaching Antarctica, while climate change may make successful establishment more likely. The frequency and probability of human-assisted transfer mechanisms appear to far outweigh those of natural propagule introductions by wind, water, birds and marine mammals. A dilemma for scientists and environmental managers, which is exacerbated by a poor baseline knowledge of Antarctic biodiversity, is how to determine the native/non-native status of a newly discovered species which could be (a) a previously undiscovered long-term native species, (b) a recent natural colonist or (c) a human-mediated introduction. A correct diagnosis is crucial as the Protocol on Environmental Protection to the Antarctic Treaty dictates dramatically different management responses depending on native/non-native status: native species and recent natural colonists should be protected and conserved, while non-native introductions should be eradicated or controlled. We review current knowledge on how available evidence should be used to differentiate between native and non-native species, and discuss and recommend issues that should be considered by scientists and managers upon discovery of a species apparently new to the Antarctic region.     

Conservation of Insect Diversity: a Habitat Approach

Abstract: Neither time nor resources exist to design conservation plans for every species, particularly for little-studied, noncharismatic, but ecologically important taxa that make up most of biodiversity. To explore the feasibility of basing conservation action on community-level biogeography, we sampled a montane insect community. We addressed three issues: (1) the appropriate scale for sampling insect communities; (2) the association of habitat specialization—perhaps a measure of extinction vulnerability—with other ecological or physical traits; and (3) the correlation of diversity across major insect groups. Using malaise traps in Gunnison County, Colorado, we captured 8847 Diptera (identified to family and morphospecies), 1822 Hymenoptera (identified to morphospecies), and 2107 other insects (identified to order). We sampled in three habitat types—meadow, aspen, and conifer—defined on the basis of the dominant vegetation at the scale of hundreds of meters. Dipteran communities were clearly differentiated by habitat type rather than geographic proximity. This result also holds true for hymenopteran communities. Body size and feeding habits were associated with habitat specialization at the family level. In particular, habitat generalists at the family level—taxa perhaps more likely to survive anthropogenic habitat alteration—tended to be trophic generalists. Dipteran species richness was marginally correlated with hymenopteran species richness and was significantly correlated with the total number of insect orders sampled by site. Because these correlations result from differences in richness among habitat types, insect taxa may be reasonable surrogates for one another when sampling is done across habitat types. In sum, community-wide studies appear to offer a practical way to gather information about the diversity and distribution of little-known taxa.     

Ethanol production from banana peels using statistically optimized simultaneous saccharification and fermentation process

Dried and ground banana peel biomass (BP) after hydrothermal sterilization pretreatment was used for ethanol production using simultaneous saccharification and fermentation (SSF). Central composite design (CCD) was used to optimize concentrations of cellulase and pectinase, temperature and time for ethanol production from BP using SSF. Analysis of variance showed a high coefficient of determination (R²) value of 0.92 for ethanol production. On the basis of model graphs and numerical optimization, the validation was done in a laboratory batch fermenter with cellulase, pectinase, temperature and time of nine cellulase filter paper unit/gram cellulose (FPU/g-cellulose), 72 international units/gram pectin (IU/g-pectin), 37 °C and 15 h, respectively. The experiment using optimized parameters in batch fermenter not only resulted in higher ethanol concentration than the one predicted by the model equation, but also saved fermentation time. This study demonstrated that both hydrothermal pretreatment and SSF could be successfully carried out in a single vessel, and use of optimized process parameters helped achieve significant ethanol productivity, indicating commercial potential for the process. To the best of our knowledge, ethanol concentration and ethanol productivity of 28.2 g/l and 2.3 g/l/h, respectively from banana peels have not been reported to date.