Foraging ants trade off further for faster: use of natural bridges and trunk trail permanency in carpenter ants

Trail-making ants lay pheromones on the substrate to define paths between foraging areas and the nest. Combined with the chemistry of these pheromone trails and the physics of evaporation, trail-laying and trail-following behaviours provide ant colonies with the quickest routes to food. In relatively uniform environments, such as that provided in many laboratory studies of trail-making ants, the quickest route is also often the shortest route. Here, we show that carpenter ants (Camponotus rufipes), in natural conditions, are able to make use of apparent obstacles in their environment to assist in finding the fastest routes to food. These ants make extensive use of fallen branches, twigs and lianas as bridges to build their trails. These bridges make trails significantly longer than their straight line equivalents across the forest floor, but we estimate that ants spend less than half the time to reach the same point, due to increased carriage speed across the bridges. We also found that these trails, mainly composed of bridges, are maintained for months, so they can be characterized as trunk trails. We suggest that pheromone-based foraging trail networks in field conditions are likely to be structured by a range of potentially complex factors but that even then, speed remains the most important consideration.     

Comparison of methods of preserving tissues for pesticide analysis

Formalin preservation, freezing, spoiling followed by freezing, and phenoxyethanol were compared in terms of concentrations of DDT, DDD, DDE, endrin, and heptachlor epoxide measured in brain, liver and carcass of birds fed dietary dosages of pesticides and in spiked egg homogenate. Phenoxyethanol proved to be an unsatisfactory preservative; the amount of extractable lipid was excessive, and measurements of concentrations in replicates were erratic. Concentrations of residues in formalin-preserved and frozen samples did not differ significantly in any tissue. Percentage lipid in brains and eggs, however, were significantly lower in formalin-preserved samples. Samples of muscle and liver that had been spoiled before freezing yielded less DDD, and muscle samples yielded more DDT than formalin-preserved samples. We conclude that formalin preservation is a satisfactory method for preservation of field samples and that the warming and spoiling of samples that may occur unavoidably in the field will not result in misleading analytical results.     

Genetic caste polymorphism and the evolution of polyandry in <Emphasis Type="Italic">Atta</Emphasis> leaf-cutting ants

Multiple mating by females with different males (polyandry) is difficult to explain in many taxa because it carries significant costs to females, yet benefits are often hard to identify. Polyandry is a derived trait in social insects, the evolutionary origins of which remain unclear. One of several leading hypotheses for its evolution is that it improves division of labour by increasing intra-colonial genetic diversity. Division of labour is a key player in the ecological success of social insects, and in many successful species of ants is based on morphologically distinct castes of workers, each with their own task specialisations. Atta leaf-cutting ants exhibit one of the most extreme and complicated forms of morphologically specialised worker castes and have been reported to be polyandrous but with relatively low mating frequencies (~2.5 on average). Here, we show for the first time that there is a significant genetic influence on worker size in Atta colombica leaf-cutting ants. We also provide the first estimate of the mating frequency of Atta cephalotes (four matings) and, by analysing much higher within-colony sample sizes, find that Atta are more polyandrous than previously thought (approximately six to seven matings). The results show that high polyandry and a genetic influence on worker caste are present in both genera of leaf-cutting ants and add weight to the hypothesis that division of labour is a potential driver of the evolution of polyandry in this clade of ants.     

Determining floodplain sedimentation rates using Cs in a low fallout environment dominated by channel- and cultivation-derived sediment inputs, central Queensland, Australia

Fallout ¹³⁷Cs has been widely used to determine floodplain sedimentation rates in temperate environments, particularly in the northern hemisphere. Its application in low fallout, tropical environments in the southern hemisphere has been limited. In this study we assess the utility of ¹³⁷Cs for determining rates of floodplain sedimentation in a dry-tropical catchment in central Queensland, Australia. Floodplain and reference site cores were analysed in two centimetre increments, depth profiles were produced and total ¹³⁷Cs inventories calculated from the detailed profile data. Information on the rates of ¹³⁷Cs migration through local soils was obtained from the reference site soil cores. This data was used in an advection–diffusion model to account of ¹³⁷Cs mobility in floodplain sediment cores. This allowed sedimentation rates to be determined without the first year of detection for ¹³⁷Cs being known and without having to assume that ¹³⁷Cs remains immobile following deposition. Caesium-137 depth profiles in this environment are demonstrated to be an effective way of determining floodplain sedimentation rates. The total ¹³⁷Cs inventory approach was found to be less successful, with only one of the three sites analysed being in unequivocal agreement with the depth profile results. The input of sediment from catchment sources that have little, or no, ¹³⁷Cs attached results in true depositional sites having total inventories that are not significantly different from those of undisturbed reference sites.     

Interaction of nitrogen dioxide (NO2) with a monolayer of oleic acid at the air–water interface – A simple proxy for atmospheric aerosol

The reactions between atmospheric oxidants and organic amphiphiles at the air–water interface of an aerosol droplet may affect the size and critical supersaturation required for cloud droplet formation. We demonstrate that no reaction occurs between gaseous nitrogen dioxide (1000 ppm in air) and a monolayer of an insoluble amphiphile, oleic acid (cis-9-octadecenoic acid), at the air–water interface which removes material from the air–water interface. We present evidence that the NO₂ isomerises the cis-9-octadecenoic (oleic) acid to trans-9-octadecenoic (elaidic) acid. The study presented here is important for future and previous studies of (1) the reaction between the nitrate radical, NO₃, and thin organic films as NO₂ is usually present in high concentrations in these experimental systems and (2) the effect of NO₂ air pollution on the unsaturated fatty acids and lipids found at the air–liquid surface of human lung lining fluid.     

The role of environmental and fisheries multi-controls in white seabream (Diplodus sargus) artisanal fisheries in Portuguese coast

Evaluating the effects of fishing and environmental factors on fish populations are fundamental tenets of fisheries science. In this study, we assess associations between environmental variables (sea surface temperature; North Atlantic Oscillation index; upwelling; wind magnitude; westerly winds; northerly winds; river discharge) and fishing variables (fishing effort) in Diplodus sagus catch rates accounting for regional analyses (northwest coast; southwest coast and Algarve—Algarve south coast). Different time series models for data fitting (multi-model approach) were used. The models were lagged, according to species fishing recruitment age based on the hypothesis that fisheries catches depend on larvae recruitment and survivorship. D. sargus catch rates across areas were unrelated to fishing effort but correlated to environmental variables, with seasonal events explaining much of the variability in trends. On the northwestern coast, the catch rates were mainly set by sea surface temperature (SST) and wind magnitude; however, southwestern coast catch rates were set by NAO winter. On the south coast, only one statistical model (SST, upwelling and westerly winds) associated spring conditions with D. sargus catch rates. The multi-model approach revealed autumn, winter and spring seasonal effects to be related with northwest, southwest and Algarve coastal catch rates, respectively, indicating a possible coastal longitudinal gradient related with given periods of spawning and larval availability. The metadata analysis yielded different results from the regional analyses. In summary, marine resource management should take regional environment characteristics and variability into account when determining sustainable catch rates in given areas for species with high habitat site fidelity.     

Biotic, temporal and spatial variability of tritium concentrations in transpirate samples collected in the vicinity of a near-surface low-level nuclear waste disposal site and nearby research reactor

The results of a 21 month sampling program measuring tritium in tree transpirate with respect to local sources are reported. The aim was to assess the potential of tree transpirate to indicate the presence of sub-surface seepage plumes.Transpirate gathered from trees near low-level nuclear waste disposal trenches contained activity concentrations of ³H that were significantly higher (up to ∼700 Bq L⁻¹) than local background levels (0-10 Bq L⁻¹). The effects of the waste source declined rapidly with distance to be at background levels within 10s of metres. A research reactor 1.6 km south of the site contributed significant (p < 0.01) local fallout ³H but its influence did not reach as far as the disposal trenches.The elevated ³H levels in transpirate were, however, substantially lower than groundwater concentrations measured across the site (ranging from 0 to 91% with a median of 2%). Temporal patterns of tree transpirate ³H, together with local meteorological observations, indicate that soil water within the active root zones comprised a mixture of seepage and rainfall infiltration. The degree of mixing was variable given that the soil water activity concentrations were heterogeneous at a scale equivalent to the effective rooting volume of the trees. In addition, water taken up by roots was not well mixed within the trees. Based on correlation modelling, net rainfall less evaporation (a surrogate for infiltration) over a period of from 2 to 3 weeks prior to sampling seems to be the optimum predictor of transpirate ³H variability for any sampled tree at this site.The results demonstrate successful use of ³H in transpirate from trees to indicate the presence and general extent of sub-surface contamination at a low-level nuclear waste site.     

What’s the Problem? River Management,Education, and Public Beliefs

This paper invokes the theory of planned behavior (TPB) as a diagnostic tool to explain an existing public education program's limited success at improving river water quality in the City of Perth, Western Australia. A reflective, client-driven research approach was used. A facilitated expert workshop defined an environmental problem (excess nutrients leaving gardens and entering waterways) and a desired behavior (residents purchasing environmentally sensitive fertilizer) to address the problem. A TPB-based belief elicitation survey captured respondents' beliefs regarding the desired behavior. The findings suggest respondents were aware of the links between purchasing environmentally sensitive fertilizer and river water quality. However, this behavior is compromised by the challenges in identifying appropriate products, product quality concerns, and cost. Viewing the content of a public education program through the lens of the TPB reveals insights into how and why the program fell short in achieving one of its key behavioral change goals.     

Emissions Control and Ambient Air Quality at a Secondary Steel Production Facility

Steel production from electric arc furnaces has been continuously rising over the past few years. The trend is expected to continue due to both the anticipated increase in demand for steel, and to the replacement of obsolete open hearth furnaces. In 1972 steel produced in electric arc furnaces, which makes up 25 to 30% of the annual United States steel production, was produced primarily from recycled scrap steel in approximately 300 electric arc furnaces operated by 99 companies at 121 locations.¹ Over half of these furnaces are smaller than 50 tons, and many are located in small bar mills producing a variety of merchant steel products.