Transition of human and livestock waste management in rural Hanoi: a material flow analysis of nitrogen and phosphorus during 1980–2010

Journal of Material Cycles and Waste Management - Human and livestock waste, i.e., excreta, were intensively used in crop cultivation in Asia over the years. However, rapid economic growth induced...     

Household solid waste generation and characteristic in a Mekong Delta city,Vietnam

This study was undertaken to evaluate the quantity and composition of household solid waste to identify opportunities for waste recycling in Can Tho city, the capital city of the Mekong Delta region in southern Vietnam. Two-stage survey of 100 households was conducted for dry season and rainy season in 2009. Household solid waste was collected from each household and classified into 10 physical categories and 83 subcategories. The average household solid waste generation rate was 285.28 g per capita per day. The compostable and recyclable shares respectively accounted for 80.02% and 11.73%. The authors also analyzed the relations between some socioeconomic factors and household solid waste generation rates by physical categories and subcategories. The household solid waste generation rate per capita per day was positively correlated with the population density and urbanization level, although it was negatively correlated with the household size. The authors also developed mathematical models of correlations between the waste generation rates of main physical categories and relevant factors, such as household size and household income. The models were proposed by linear models with three variables to predict household solid waste generation of total waste, food waste, and plastic waste. It was shown that these correlations were weak and a relationship among variables existed. Comparisons of waste generation by physical compositions associated with different factors, such as seasonal and daily variation were conducted. Results presented that the significant average differences were found by the different seasons and by the different days in a week; although these correlations were weak. The greenhouse gas baseline emission was also calculated as 292.25 g (CO₂ eq.) per capita per day from biodegradable components.     

MicroRNA: a novel implication for damage and protection against ionizing radiation

Environmental Science and Pollution Research - Ionizing radiation (IR) is a form of high energy. It poses a serious threat to organisms, but radiotherapy is a key therapeutic strategy for various...     

Esterification of sugarcane bagasse by citric acid for Pb2+ adsorption: effect of different chemical pretreatment methods

In this study, different pretreatment strategies of sugarcane bagasse prior to citric acid modification were investigated in terms of Pb²⁺ adsorption capacity. Pretreatment strategies included the use of NaOH, HCl, and C₂H₅OH in various concentrations. In order to fundamentally understand how these pretreatment methods affect the modification of sugarcane bagasse by citric acid as well as the Pb²⁺ adsorption capacity of sugarcane bagasse, three main components of sugarcane bagasse namely cellulose, hemicellulose, and lignin were isolated and esterified by citric acid under the same conditions. ATR-FTIR, XPS, SEM, and an analysis of the number of carboxylic acid groups were used to investigate the physicochemical and chemical properties of the materials. These three components were proved to participate in adsorption and induce the esterification with citric acid. Hence, pretreatment with ethanol and 0.01 M NaOH which could retain cellulose, hemicellulose, and lignin in sugarcane bagasse achieved a high Pb²⁺ adsorption capacity, i.e., 122.4 and 97 mg/g after the esterification with citric acid. In contrast, pretreatment with 0.5 M NaOH and 0.1 M HCl removed lignin and hemicellulose, leading to the lowest value of approximately 45 mg/g for citric acid esterified-pretreated sugarcane bagasse. XPS analysis and number of carboxylic group measurement confirmed the esterification between bagasse and citric acid. To understand the adsorption mechanism of adsorbent, two kinetic models including pseudo-first-order model and pseudo-second-order model were applied. The experimental data were well described by the pseudo-second-order model. The adsorption isotherm data were fitted Langmuir and Freundlich.

     

Sorbent-based devices for the removal of spilled oil from water: a review

Environmental Science and Pollution Research - Always, oil spills do cause serious and dire consequences for the environment, nature, and society that it consumes much time and socio-economic...     

Status of water use and potential of rainwater harvesting for replacing centralized supply system in remote mountainous areas: a case study

Environmental Science and Pollution Research - The failure of the centralized water supply system forced XY community to become more dependent on uncertain and unstable water sources. The results...     

How air pollution lowers the domestic value-added ratio in exports: an empirical study of China

Environmental Science and Pollution Research - This paper analyzes the theoretical mechanism and transmission channel for the impact of air pollution on firms’ domestic value-added ratio...     

挥发性有机污染物排放控制标准制订中的关键技术问题研究

研究分析了挥发性有机污染物排放标准制订中4个关键技术问题:污染因子选择、控制指标确定、限值的确定以及技术管理措施.结果表明,应根据毒性和光化学反应性选择污染因子;确定控制指标应既考虑有组织控制指标,又考虑无组织的控制指标;确定排放限值应明确是基于控制技术还是基于健康风险;同时制定技术管理措施以通过源头和过程控制挥发性有机污染物排放.     

干旱区城市昌吉降雪及积雪中PGEs含量分布及其影响因素

选择干旱区中小城市昌吉市,对其降雪及积雪中铂族元素(PGEs)含量分布及影响因素进行研究.运用ICP-MS对样品进行分析测定.结果表明,降雪中Rh、Pd、Pt平均含量分别为0.43 ng·L-1(未检出～2.24 ng·L-1)、60.07 ng·L-1(46.66～84.25 ng·L-1)和4.54 ng·L-1(3.02～6.38 ng·L-1).不同场次降雪中PGEs含量存在差异,随雪前干燥期天数加长,降雪中PGEs含量趋于增大;降雪量对PGEs含量也有一定影响,降雪量越小,雪中PGEs含量越高.积雪中Rh、Pd、Pt的平均含量分别为6.65 ng·L-1(2.50～18.80 ng·L-1)、83.45 ng·L-1(46.83～199.20 ng·L-1)和8.17 ng·L-1(4.27～13.78 ng·L-1).积雪中PGEs含量远高于降雪,降雪中PGEs仅来自于单场次降雪对大气PGEs的淋洗,而积雪中PGEs不仅来自于多场次降雪中PGEs的累积,且由于积雪长时间暴露,还源源不断接受了大气干沉降带来的PGEs.各采样点积雪PGEs含量表现出交通区>居民文教区>公园广场区>郊区农田,随功能区不同,积雪中PGEs输入途径与输入量有显著差异,这是造成各功能区积雪PGEs含量不同且具有一定规律性的主要原因.     

BTEX pollution caused by motorcycles in the megacity of HoChiMinh

Monitoring of benzene, toluene and xylenes (BTEX) was conducted along with traffic counts at 17 roadside sites in urban areas of HoChiMinh. Toluene was the most abundant substance, followed by p,m-xylenes, benzene, o-xylene and ethylbenzene. The maximum observed hour-average benzene concentration was 254 μg/m3 . Motorcycles contributed to 91% of the traffic fleet. High correlations among BTEX species, between BTEX concentrations and the volume of on-road motorcycles, and between inter-species ratios in air and in gasoline indicate the motorcycle-exhaust origin of BTEX species. Daily concentrations of benzene, toluene, ethylbenzene, p,m-xylenes and o-xylene were 56, 121, 21, 64 and 23 μg/m 3 , respectively. p,m-xylenes possess the highest ozone formation potential among the BTEX family.