Sidestream tobacco smoke constituents in indoor air modelled in an experimental chamber— Polycyclic aromatic hydrocarbons

Exposure to sidestream tobacco smoke is concerned with constituents in suspension in the indoor atmosphere. The natural dissipation of sidestream tobacco smoke has been investigated in a static atmosphere in a 10 m³ experimental chamber, and the rate of dissipation is expressed as T_0.5, the half-life of residence in the air. Respective T_0.5 of smoke components are calculated from the various sample data points, assuming a kinetic equation of the first-order process. Sidestream smoke has been generated by a smoking machine according to the Coresta standard protocol and then left to age over an 8-hour period, with subsequent sampling at defined time intervals. The experiments have been repeated over five days, and eight data point samples are obtained for each experiment. Besides nicotine, CO, and smoke particulate matter, interest has been focused on polycyclic aromatic hydrocarbons (PAH). The initial concentrations, C₀ for smoke particulate matter and nicotine (gas and particulate phases) are found to be 13.8 mg and 92 μg per cigarette per cubic meter, with T_0.5 being 2.6 and 2.1 hours, respectively. Low molecular-weight PAH have T_0.5 up to 20 hours, explainable only by their high concentrations in the gas phase, while the 3- to 7-ring PAH have T_0.5 of about 2 hours. The contribution of CO to ambient concentration is 91 mg per cigarette per cubic meter. The data can be useful in mathematical modellization studies regarding ventilation or exposure to sidestream smoke.     

Arsenic in groundwaters of the Lower Mekong

Increasing incidence and awareness of arsenic in many alluvial aquifers of South-east Asia has raised concern over possible arsenic in the Lower Mekong Basin. Here, we have undertaken new research and reviewed many previous small-scale studies to provide a comprehensive overview of the status of arsenic in aquifers of Cambodia and the Cuu Long Delta of Vietnam. In general natural arsenic originates from the Upper Mekong basin, rather than from the local geology, and is widespread in soils at typical concentrations of between 8 and 16 ppm; (dry weight). Industrial and agricultural arsenic is localised and relatively unimportant compared to the natural alluvial arsenic. Aquifers most typically contain groundwaters of no more than 10 μg L⁻¹, although scattered anomalous areas of 10 to 30 μg L⁻¹ are also quite common. The most serious, but possibly ephemeral arsenic anomalies, of up to 600 μg L⁻¹, are associated with iron and organic-rich flood-plain sediments subject to very large flood-related fluctuations in water level, resulting in transient arsenopyrite dissolution under oxidizing conditions. In general, however, high-arsenic groundwaters result from the competing interaction between sorption and dissolution processes, in which arsenic is only released under reducing and slightly alkaline conditions. High arsenic groundwaters are found both in shallow water-tables, and in deeper aquifers of between 100 and 120 m depth. There is no evidence of widespread arsenicosis, but there are serious localised health-hazards, and some risk of low-level arsenic ingestion through indirect pathways, such as through contaminated rice and aquaculture. An almost ubiquitous presence of arsenic in soils, together with the likelihood of greatly increased groundwater extraction in the future, will require continuing caution in water resources development throughout the region.     

The protective effect of green space on heat-related respiratory hospitalization among children under 5 years of age in Hanoi,Vietnam

Environmental Science and Pollution Research - Combined effects of global warming and rapid urbanization replace green spaces with urban facilities. Children in urban areas are at a higher risk of...     

A multi-biomarker approach to assess the impact of farming systems on black tiger shrimp (Penaeus monodon)

This study examined the advantages of the use of biomarkers as an early warning system by applying it to different shrimp farming systems in Soctrang and Camau provinces, main shrimp producers in Mekong River Delta, Vietnam. Shrimp were collected at 15 different farms divided into four different farming systems: three farms were converted from originally rice paddies into intensive shrimp farming systems (IS1, IS2, IS3); three farms were rice-shrimp integrated farming systems (RS4, RS5, RS6); three farms were intensive farming systems (IS7, IS8, IS9); six farms were extensive shrimp farming systems (From ES1 to ES6). Lipid peroxidation (LPO) and total glutathione (GSH) were measured as well as catalase (CAT), glutathione peroxidase (GPX), glutathione S-transferase (GST) and acetylcholinesterase activities (ACHE). Organ specificity was observed between gills and hepatopancreas with generally higher activity of GST in gills (GSTG) whereas the contrary was observed for LPO level in gills (LPOG). Hierarchical clustering and principal component analysis clearly indicated that shrimp reared in extensive culture system formed a distinct group from those reared in intensive or rice-shrimp integrated systems. CAT in gills (CATG), GPX in gills (GPXG) and hepatopancreas (GPXHP) and ACHE in muscle (ACHEM) of shrimp collected in extensive farms showed a general higher level than those in intensively farmed shrimp. On the contrary, we observed clear high levels of GSTG and GST in hepatopancreas (GSTHP) and LPOG and hepatopancreas (LPOHP) of shrimp sampled in intensive and rice-shrimp integrated systems. Thus, we propose that LPO and CAT, GPX, GST and ACHE can be used as a set of biomarkers for the assessment of health condition and can discriminate between shrimp cultivated in different farming systems. These findings provide the usefulness of integrating a set of biomarkers to define the health status of shrimp in different shrimp culture systems.     

Pyrethroid pesticide effects on behavioral responses of aquatic isopods to danger cues

The present study sought to evaluate the behavioral responses of non-target organisms in order to determine whether phototactic responses of isopods to danger cues are altered as a function of exposure to the pyrethroid pesticides λ-cyhalothrin and bifenthrin. Experiments conducted on Gnorimosphaeroma oregonensis identified sublethal behavioral responses to pyrethroids, λ-cyhalothrin and bifenthrin at concentrations 0.15 ng/mL, 0.025 ng/mL, and 0.005 ng/mL. Experimental setup tested isopod phototactic responses across six treatments: control, pyrethroid, hemolymph, predator, hemolymph?+?pyrethroid, and predator?+?pyrethroid. Isopods exhibited no preference for phototactic responses in the control and pyrethroid treatments. When exposed to danger cues (hemolymph or predator), isopods exhibited significant negative phototaxis, as expected. When exposure to danger cues was combined with pyrethroids, isopods again exhibited no preference for phototactic response. Experiments indicate that pyrethroids diminish isopod’s negatively phototactic response to danger cues.     

Detection of dicofol and related pesticides in human breast milk from China, Korea and Japan

Previously, we demonstrated that the concentrations of DDTs were greater in breast milk collected from Chinese mothers than from Japanese and Korean mothers. To investigate dicofol as a possible source of the DDTs in human breast milk, we collected breast milk samples from 2007 to 2009 in China (Beijing), Korea (Seoul, Busan) and Japan (Sendai, Takarazuka and Takayama). Using these breast milk samples, we quantified the concentrations of dichlorobenzophenone, a pyrolysis product of dicofol (simply referred to as dicofol hereafter), dichlorodiphenyltrichloroethane and its metabolites (DDTs) using GC-MS. Overall, 12 of 14 pooled breast milk samples from 210 mothers contained detectable levels of dicofol (>0.1 ng g⁻¹ lipid). The geometric mean concentration of dicofol in the Japanese breast milk samples was 0.3 ng g⁻¹ lipid and significantly lower than that in Chinese (9.6 ng g⁻¹ lipid) or Korean breast milk samples (1.9 ng g⁻¹ lipid) (p < 0.05 for each). Furthermore, the ΣDDT levels in breast milk from China were 10-fold higher than those from Korea and Japan. The present results strongly suggest the presence of extensive emission sources of both dicofol and DDTs in China. However, exposure to dicofol cannot explain the large exposure of Chinese mothers to DDTs because of the trace levels of dicofol in the ΣDDTs. In the present study, dicofol was confirmed to be detectable in human breast milk. This is the first report to identify dicofol in human samples.     

Accurate sampling of PCDD/F in high temperature flue-gas using cooled sampling probes

In a laboratory-scale combustion reactor, flue-gas samples were collected at two temperatures in the post-combustion zone, 700 °C and 400 °C, using two different water-cooled sampling probes. The probes were the cooled probe described in the European Standard method EN-1948:1, referred to as the original probe, and a modified probe that contained a salt/ice mixture to assist the cooling, referred to as the sub-zero probe. To determine the efficiency of the cooling probes, internal temperature measurements were recorded at 5 cm intervals inside the probes. Flue-gas samples were analyzed for polychlorinated dibenzo-p-dioxin and dibenzofurans (PCDD/Fs). Samples collected at 700 °C using the original cooling probe showed higher concentrations of PCDD/Fs compared to samples collected using the sub-zero probe. No significant differences were observed between samples collected at 400 °C. The results indicated that artifact formation of PCDD/Fs readily occurs during flue-gas sampling at high temperatures if the cooling within the probe is insufficient, as found for the original probe at 700 °C. It was also shown that this problem could be alleviated by using probes with an enhanced cooling capacity, such as the sub-zero probe.Although this may not affect samples collected for regulatory purposes in exit gases, it is of great importance for research conducted in the high-temperature region of the post-combustion zone.     

Primary biosorption mechanism of lead (II) and cadmium (II) cations from aqueous solution by pomelo (Citrus maxima) fruit peels

Environmental Science and Pollution Research - The present work investigates the primary adsorption mechanisms of lead (II) and cadmium (II) cations onto pomelo fruit peel (PFP) from aqueous...     

An executive review of sludge pretreatment by sonication

Ultrasonication (US), which creates hydro-mechanical shear forces in cavitation, is an advanced technology in sludge pretreatment. However, there are many factors affecting the efficacy of cavitation and ultrasonication disintegration of sludge as a consequence. The objective of this work is to present an extensive review of evaluation approaches of sludge US pretreatment efficiency. Besides, optimization methodologies of related parameters, the differences of optimum values and the similarities of affecting trends on cavitation and sludge pretreatment efficiency were specifically pointed out, including ambient conditions, ultrasonic properties, and sludge characteristics. The research is a prerequisite for optimization of sludge US pretreatment efficiency in lab-scale and practical application. There is not-yet a comprehensive method to evaluate the efficiency of sludge US pretreatment, but some main parameters commonly used for this purpose are degree of sludge disintegration, proteins, particle size reduction, etc. Regarding US parameters, power input P_US, intensity I_US, and frequency F_S seem to have significant effects. However, the magnitude of the effect of P_US and probe size in terms of I_US has not been clearly detailed. Investigating very low F_S seems interesting but has not yet been taken into consideration. In addition, static pressure effect has been marginally studied only and investigation on the effect of pH prior to US process has been restricted. Their effects therefore should be varied separately and simultaneously with other related parameters, i.e. process conditions, ultrasonic properties, and sludge characteristics, to optimize sludge US pretreatment process.