Levels of household particulate matter and environmental tobacco smoke exposure in the first year of life for a cohort at risk for asthma in urban Syracuse, NY

The Syracuse, NY, AUDIT (Assessment of Urban Dwellings for Indoor Toxics) study was designed to quantify asthma agent levels in the inner-city homes of a birth cohort whose mothers had a diagnosis of asthma. Risk of exposure to particulate matter (PM), particle number and tobacco smoke was assessed in 103 infants' homes. Repeat measurements were made in 44% of the homes. Infants also were examined on a quarterly basis during the first year of life to monitor their respiratory health and urine cotinine levels. Overall geometric mean (GM) values for PM(2.5) of 21.2 μg/m(3) and for PM(10) of 31.8 μg/m(3) were recorded in homes at visit 1. GM values for PM(2.5) and PM(10) in smoking homes were higher at 26.3 and 37.7 μg/m(3), while values in non-smoking homes were 12.7 and 21.2 μg/m(3) respectively. Fifty-four percent of mothers (55/103) smoked at some point in pregnancy (39% smoked throughout pregnancy). Environmental tobacco smoke (ETS) exposure occurred in 68% of homes during the infants' first year. Significant to this study was the size- and time-resolved monitoring of PM at 140 home visits and the classification of PM count data. PM number counts ranged from continuously low levels (little indoor activity) to continuously high counts (constant indoor activity), and recorded apparent instances of prolonged repeated cigarette smoking. Wheezing in the first year of life was recorded for 38% of the infants (39/103). Adjusted logistic regression modeling demonstrated that elevated levels of indoor PM(2.5) (≥ 15 μg/m(3)) were a significant risk factor for infant wheezing after controlling for infant gender, mothers' age and education level, season of home visit and presence of carpeting (OR 4.21; 95% CI 1.36-13.03; p=0.013). An elevated level of the nicotine metabolite cotinine in infant urine also was associated with infant wheezing after adjusting for infant gender, mothers' age and education level (OR 5.10; 95% CI 0.96-27.24; p=0.057). ETS exposure was pervasive in the AUDIT cohort and a risk for developing infants in this urban population.     

High concentrations of polybrominated diphenylethers (PBDEs) in breast adipose tissue of California women

We measured major PBDEs and PCBs in breast adipose tissues of California women participating in a breast cancer study in the late 1990s. Samples were analyzed using gas chromatography with electron impact ionization and tandem mass spectrometry detection. The congener profile observed was: BDE47>BDE99>BDE153>BDE100>BDE154 and PCB153>PCB180>PCB138>PCB118. Whereas high correlations were observed within each chemical class, very weak correlations appeared between classes, pointing to different exposure pathways. Weak negative associations were observed for PBDE congeners and age. Our PBDE data are among the highest reported, exceeding data from the National Health and Nutrition Examination Survey and consistent with the high use of PBDEs in California. These data may be helpful in establishing a baseline for PBDE body burdens to gauge changes over time as a result of restrictions in the use of PBDE formulations.     

Technologically enhanced 210Pb and 210Po in iron and steel industry

Iron and steel manufacture has been ranked as the largest industrial source of environmental contamination in the USA; the wastes generated in their production processes contain heavy elements that can be a source of contamination, and natural radionuclides that can produce an occupational and/or public radiological impact. In this work the potential occupational effective dose rate (μSv/y) due to inhalation in four integrated steel-making factories from Egypt has been evaluated, by assuming a well defined scenario and with basis in the ²¹⁰Pb and ²¹⁰Po activity concentrations determined in ore and wastes collected in the aforementioned factories. Activity concentrations, in Bq/kg, of ²¹⁰Pb and ²¹⁰Po, and leachable Pb and Fe were measured using gamma-ray spectrometry based on HPGe detector, alpha particle spectrometry based on PIPS detector, and inductively coupled plasma-mass spectrometry (ICP-MS). Levels of ²¹⁰Pb and ²¹⁰Po in the range of <DL-4238 and 1-5660 Bq/kg, respectively, were found. According to the assumed scenarios, the occupational exposures by inhalation are much lower than the recommended annual effective dose limit, although the environmental impact due to waste storage and/or use should be considered based on case by case evaluation.     

Inventory and vertical migration of 90Sr fallout and 137Cs/90Sr ratio in Spanish mainland soils

In this paper the inventory of ⁹⁰Sr in 34 points distributed along the Spanish peninsular territory is presented. Obtained values range between 173 Bq/m² and 2047 Bq/m². From these data set and those ¹³⁷Cs data obtained in a previous work the ¹³⁷Cs/⁹⁰Sr activity ratio has been established, laying this value between 0.9 and 3.6. Also the migration depth of both radionuclides has been analysed obtaining for ¹³⁷Cs an average value 57% lower than that obtained for ⁹⁰Sr.Additionally, this paper presents the results obtained in 11 sampling points in which the activity vertical profile has been measured. These profiles have been analysed to state the behaviour of strontium in soils and after, by using a convective-diffusive model, the parameters of the model which governs the vertical migration of ⁹⁰Sr in the soil, v (apparent convection velocity) and D (apparent diffusion coefficient) have been evaluated. Mean values obtained are 0.20 cm/year and 3.67 cm²/year, respectively.     

Sorption of selenate on soils and pure phases: kinetic parameters and stabilisation

This study was conducted to identify the principle selenate carrier phases for two selected soils, by comparing their reactivity with selenate to that of pure phases of the solids. Silica, calcium carbonate, aluminium hydroxide, goethite, bentonite and humic acid were selected as the main soil carrier phases. Comparisons were made first on the parameter values obtained with the best fit of a kinetic sorption model which can discriminate instantaneous sorption from kinetically limited sorption. Then comparisons were made of the ability for each solid to stabilise selenate by measuring the ratio of the partition coefficient for sorption (Kd_sorption) over that of the desorption (Kd_desorption). Kinetics and stabilisation were used to help elucidate the nature of interactions with the test solid phases for a large range of selenate concentrations. The experiments were conducted over 165 h in batch reactors, the solid being isolated from the solution by dialysis tubing, at two pH (5.4 and 8) and three selenate concentrations (1 × 10⁻³, 1 × 10⁻⁶ and 1 × 10⁻⁸ mol L⁻¹). The results obtained showed that only aluminium hydroxide can sorb selenate throughout the studied pH range (pH 5.4 to 8.0). The sorption capacity on this mineral was high (Kd_sorption > 100 to 1 × 10⁴ L kg⁻¹) and the selenate was mainly stabilized by the formation of inner sphere complexes. The sorption on goethite occurred at pH 5.4 (Kd_sorption 52 L kg⁻¹), mainly as outer sphere complexes, and was null at pH 8. On silica, a weak sorption was observed only at pH 5.4 and at 165 h (Kd_sorption 4 L kg⁻¹). On bentonite, calcium carbonate and humic acid no significant sorption was observed. Concerning the two soils studied, different behaviours were observed for selenate. For soil Ro (pH 5.4), Kd_sorption was low (8 L kg⁻¹) compared to soil Bu (pH 8) (70 L kg⁻¹). The sorption behaviour of selenate on soil Ro was mainly due to outer sphere complexes, as for goethite, whereas for soil Bu the sorption was mainly attributed to inner sphere complexes followed by reduction mechanisms, probably initiated by microorganisms, in which no steady state was reached at the end of the 165 h experiments. The sorption of selenate decreased when concentrations reached 1 × 10⁻³ mol L⁻¹, due to solid saturation, except for aluminium hydroxide. Reduction of selenate seemed also to occur on goethite and soil Ro, for the same concentration, but without preventing a decrease in sorption. Thus, this work shows that the comparison of selenate behaviour between soil and pure phases helps to elucidate the main carrier phases and sorption mechanisms in soil.     

The problem of estimating recent genetic connectivity in a changing world

Accurate understanding of population connectivity is important to conservation because dispersal can play an important role in population dynamics, microevolution, and assessments of extirpation risk and population rescue. Genetic methods are increasingly used to infer population connectivity because advances in technology have made them more advantageous (e.g., cost effective) relative to ecological methods. Given the reductions in wildlife population connectivity since the Industrial Revolution and more recent drastic reductions from habitat loss, it is important to know the accuracy of and biases in genetic connectivity estimators when connectivity has declined recently. Using simulated data, we investigated the accuracy and bias of 2 common estimators of migration (movement of individuals among populations) rate. We focused on the timing of the connectivity change and the magnitude of that change on the estimates of migration by using a coalescent‐based method (Migrate‐n) and a disequilibrium‐based method (BayesAss). Contrary to expectations, when historically high connectivity had declined recently: (i) both methods over‐estimated recent migration rates; (ii) the coalescent‐based method (Migrate‐n) provided better estimates of recent migration rate than the disequilibrium‐based method (BayesAss); (iii) the coalescent‐based method did not accurately reflect long‐term genetic connectivity. Overall, our results highlight the problems with comparing coalescent and disequilibrium estimates to make inferences about the effects of recent landscape change on genetic connectivity among populations. We found that contrasting these 2 estimates to make inferences about genetic‐connectivity changes over time could lead to inaccurate conclusions.     

Material and energy recovery from Automotive Shredded Residues (ASR) via sequential gasification and combustion

Shredding is the common end-of-life treatment in Europe for dismantled car wrecks. It produces the so-called Automotive Shredded Residue (ASR), usually disposed of in landfill. This paper summarizes the outcome of a study carried out by Politecnico di Milano and LEAP with the support of Actelios SpA on the prospects of a technology based on sequential gasification and combustion of this specific waste stream. Its application to the treatment of ASR allows the recovery of large fractions of metals as non-oxidized, easily marketable secondary raw materials, the vitrification of most of the ash content and the production of power via a steam cycle. Results show that despite the unfavourable characteristics of ASR, the proposed technology can reach appealing energy performances. Three of four environmental impact indicators and the cumulative energy demand index are favourable, the main positive contributes being electricity production and metal recovery (mainly aluminium and copper). The only unfavourable indicator is the global warming index because, since most of the carbon in ASR comes from fossil sources, the carbon dioxide emissions at the stack of the thermal treatment plant are mainly non-renewable and, at the same time, the avoided biogas production from the alternative disposal route of landfilling is minor.     

Modelling with uncertainty: Introducing a probabilistic framework to predict animal population dynamics

Predictive population models designed to assist managers and policy makers require an explicit treatment of inherent uncertainty and variability. These are particular concerns when modelling non-native and reintroduced species, when data have been collected within one geographical or ecological context but predictions are required for another, or when extending models to predict the consequences of environmental change (e.g., climate or land-use). We present an aspatial, probabilistic framework of hierarchical process models for predicting population growth even when data are sparse or of poor quality. Insight into the factors affecting population dynamics in real landscapes can be provided and Kullback–Leibler distances are used to compare the relative output of models. This flexible yet robust framework gives easily interpretable results, allowing managers as well as modellers to invalidate anomalous models and apply others to real-life scenarios.We illustrate the framework’s power with a meta-analysis of European wild boar (Sus scrofa) data. We test hypotheses about the effect of geographic region, hunting and mast years on wild boar population growth, to build models of wild boar dynamics for the UK. The framework quantifies the importance of hunting pressure as a driver of population growth, and confirms that reproductive success is greatly decreased in poor mast years, suggesting that the key to predicting wild boar dynamics is to ascertain local hunting pressure and to better understand changing food availability. Geography had no significant effect, indicating that it is not a good proxy for modelling the impact of change in climate or land-use on wild boar populations at the European scale. We use the framework to predict population abundance 9 years after an isolated population of wild boar established in the UK; in a comparison with the only field data and two independent modelling exercises, our framework provides the most robust and informative results.