A soil sampling intercomparison exercise for the ALMERA network

Soil sampling and analysis for radionuclides after an accidental or routine release is a key factor for the dose calculation to members of the public, and for the establishment of possible countermeasures. The IAEA organized for selected laboratories of the ALMERA (Analytical Laboratories for the Measurement of Environmental Radioactivity) network a Soil Sampling Intercomparison Exercise (IAEA/SIE/01) with the objective of comparing soil sampling procedures used by different laboratories. The ALMERA network is a world-wide network of analytical laboratories located in IAEA member states capable of providing reliable and timely analysis of environmental samples in the event of an accidental or intentional release of radioactivity. Ten ALMERA laboratories were selected to participate in the sampling exercise. The soil sampling intercomparison exercise took place in November 2005 in an agricultural area qualified as a “reference site”, aimed at assessing the uncertainties associated with soil sampling in agricultural, semi-natural, urban and contaminated environments and suitable for performing sampling intercomparison. In this paper, the laboratories sampling performance were evaluated.     

Protease production by the keratinolytic Bacillus sp. CL18 through feather bioprocessing

Bacillus sp. CL18 was investigated to propose a bioprocess for protease production using feathers as organic substrate. In feather broth (FB), containing feathers as sole organic substrate (1–100 g l^?1), maximal protease production was observed at 30 g l^?1 (FB30) after 6 days of cultivation, whereas increased feather concentrations negatively affected protease production and feather degradation. Protease production peaks were always observed earlier during cultivations than maximal feather degradation. In FB30, 80% of initial feathers mass were degraded after 7 days. Addition of glucose, sucrose, starch, yeast extract (2 g l^?1), CaCl₂, or MgCl₂ (10 mmol l^?1) to FB30 decreased protease production and feather degradation. FB30 supplementation with NH₄Cl (1 g l^?1) resulted in less apparent negative effects on protease production, whereas peptone (2 g l^?1) increased protease yields earlier during cultivations (3 days). Through a central composite design employed to investigate the effects of peptone and NH₄Cl (0.5–4.5 g l^?1) on protease production and feather degradation, FB30 supplementation with peptone and NH₄Cl (0.5–1.1 g l^?1) increased protease production within a shorter cultivation time (5 days) and hastened complete feather degradation (6 days). Feather bioconversion concurs with sustainable production of value-added products.

     

Trends and applications of multi-criteria decision analysis in environmental sciences: literature review

Approximately 3000 papers concerning multi-criteria decision analysis (MCDA) in the environmental field were identified through a series of queries in the Web of Science database and classified by MCDA method and environmental application using text mining in R. Stemming and stop word removal techniques were used to remove irrelevant text from the literature. Trends in MCDA methods (AHP/ANP, TOPSIS, outranking, MAUT/MAVT) associated with specific environmental applications (water, air, energy, natural resources, and waste management) or interventions/tools applications (stakeholders, strategies, sustainability, and GIS) were identified. The results show a linear growth in the share of MCDA papers in environmental science across all application areas. Furthermore, the results show that AHP/ANP and MAUT/MAVT are the most frequently mentioned MCDA methods in the literature. For environmental applications, the results showed that natural resource and waste management keywords were, respectively, the most and least commonly discussed applications within the MCDA papers. For intervention/tool applications, we found that keywords associated with ‘strategy’ and ‘GIS’ applications are, respectively, the most and least commonly discussed keywords within the MCDA papers. The authors found that MCDA method keywords were evenly distributed across the environmental and intervention/tool applications, indicating a lack of preference in the environmental field for use of specific MCDA methods. This paper demonstrates that text mining is an applicable tool to assess specific textual trends and patterns when analyzing larger bodies of MCDA literature.     

Effects of drill cuttings discharge on meiofauna communities of a shelf break site in the southwest Atlantic

The present study investigates the effects of drill cutting discharges on the structure of meiofauna communities in an area of the shelf break at Campos Basin, Southeast Brazil. Drilling activities were operated, in a first phase, with water-based fluid and, in a second phase, with synthetic fluid paraffin-based (NAF-III). A total of 135 samples taken at a pre-drilling situation (MS1) and two post-drilling moments (MS2 and MS3—3 and 22 months post-drilling, respectively) were analyzed. Effects on meiofauna were dependent on two main factors: 1—the impact received during drilling operation, if water-based or synthetic/water-based drilling fluid and 2—the background state, if it already presented signs of previous drilling activities or not. Based on univariate and multivariate analysis, there were evidences that the most affected area after drilling was those under the influence of synthetic-based fluid and that already had signs of previous drillings activities. The region impacted only by water-based fluid was less affected and the only one that completely recovered after 22 months. Nematodes and copepods had different responses to the impact. While copepods flourish in the impacted area and recovered 22 months after drilling, nematodes were adversely affected shortly after drilling and the community structure only recovered where hydrocarbons had been depleted.     

Assessment of the labile fractions of copper and zinc in marinas and port areas in Southern Brazil

The dissolved labile and labile particulate fractions (LPF) of Cu and Zn were analyzed during different seasons and salinity conditions in estuarine waters of marina, port, and shipyard areas in the southern region of the Patos Lagoon (RS, Brazil). The dissolved labile concentration was determined using the diffusive gradients in thin films technique (DGT). DGT devices were deployed in seven locations of the estuary for 72 h and the physicochemical parameters were also measured. The LPF of Cu and Zn was determined by daily filtering of water samples. Seasonal variation of DGT–Cu concentrations was only significant (p?<?0.05) at one shipyard area, while DGT–Zn was significant (p?<?0.05) in every locations. The LPF of Cu and Zn concentrations demonstrated seasonal and spatial variability in all locations, mainly at shipyard areas during high salinity conditions. In general, except the control location, the sampling locations showed mean variations of 0.11–0.45 μg?L^?1 for DGT–Cu, 0.89–9.96 μg?L^?1 for DGT–Zn, 0.65–3.69 μg?g^?1 for LPF–Cu, and 1.35–10.87 μg?g^?1 for LPF–Zn. Shipyard areas demonstrated the most expressive values of labile Cu and Zn in both fractions. Strong relationship between DGT–Zn and LPF–Zn was found suggesting that the DGT–Zn fraction originates from the suspended particulate matter. Water salinity and suspended particulate matter content indicated their importance for the control of the labile concentrations of Cu and Zn in the water column. These parameters must be taken into consideration for comparison among labile metals in estuaries.     

Nutrient baselines of Cerrado low-order streams: comparing natural and impacted sites in Central Brazil

The aquatic systems responsible for water supply in the Brazilian Federal District (FD) have been threatened by anthropogenic pressures, especially considering the expressive demographic increase in the region during the last decades. The purposes of this research were: (a) to assess the water quality in streams located in the FD by monitoring physical–chemical variables; (b) to define baselines for these variables among different ecological status categories. The 14 investigated streams were sampled between 2006 and 2009, in the dry (August–September, 2006, 2008, 2009) and rainy (March–April, 2008, 2009) seasons. All sampling sites were classified in four categories (“very impacted”, “impacted”, “in transition” and “natural”) using an adaptation of a rapid habitat assessment protocol. Differences in water quality among sites were generally well predicted in the four ecological status categories defined by the protocol, which showed a gradient in nutrient concentrations from reference sites classified as “natural” (medians: electrical conductivity?=?7.3 μS cm^?1; nitrate?=?0.040 mg L^?1; ammonium?=?0.039 mg L^?1; soluble reactive phosphorus (SRP)?=?<0.001 mg L^?1; total phosphorus (TP)?=?0.006 mg L^?1; ) to those classified as “very impacted” (medians: electrical conductivity?=?87.7 μS cm^?1; nitrate?=?0.247 mg L^?1; ammonium?=?0.219 mg L^?1; SRP?=?0.010 mg L^?1; TP?=?0.035 mg L^?1). Point sources inputs were the main factor for water quality deterioration. The nutrient baselines reported were relatively low when compared to data collected from reference areas in Brazil (e.g., São Paulo State) or temperate regions, especially for TP.     

Determination of water pollution by the oil products through UV photometry

Results of UV photometry of water/gasoline systems are reported. It was found that this system can be characterized with an analytical light absorption peak with maximum at 260 nm. A calibrating diagram for optical density vs. gasoline content has been built for this peak and concentration limits of the gasoline compounds’ solubility in water were found. The peak pattern and its position indicate that 1,3,5-trimethylbenzene and/or its closest homologs can be those gasoline compounds, which reveal themselves through the UV light absorption peak.     

Garnering support for Pigouvian taxation with tax return: a lab experiment

Environmental Economics and Policy Studies - To test if tax return can effectively and efficiently increase the acceptance of externality taxation, a laboratory experiment with a negative...     

Oil spreading in instantaneous and continuous spills on rotating earth

The effect of the Coriolis force on the oil spill spreading in the gravity-viscous regime is examined. A new shallow water model for the transport and spreading of oil slick of arbitrary shape is described in which the Coriolis force is included in the momentum equations and the oil–water friction is parameterized in a frame of the boundary layer theory including the Ekman friction. The numerical Lagrangian method based on smoothed particle dynamics is described. New similarity solutions of the model equations are obtained for unidirectional and axisymmetric spreading in gravity-viscous, gravity-turbulent and gravity-viscous-rotational regimes for instantaneous as well as continuous releases. The numerical simulation extends these results for the case of continuous release in the presence of currents. It was shown that Coriolis term in the momentum equation can be omitted if slick thickness is much less of the laminar Ekman layer thickness. However, the Ekman friction should be retained for slicks of any thickness for larger times. The Ekman friction results in the essential slowdown of the spreading as well as in the deflection of the oil spreading velocity at 45° from the direction of velocity in the non-rotation case. Numerical simulations of large-scale spills showed that after the 2?days the slick area with the Coriolis effect was approximately less than half of that without rotation. Therefore, the earth rotation can be also important in the oil weathering.