Provenances of atmospheric dust over Korea from Sr–Nd isotopes and rare earth elements in early 2006

Sr and Nd isotopic composition of pre- and syn-Asian dust (Hwangsa) particles collected from three different water depths at two different offshore sites, western Korea and rare earth elemental composition of syn-Asian dust particles collected from three islands around the Korean Peninsula in late April 2006 were analyzed to interpret their provenance. The dust Sr–Nd isotopic compositions vary spatiotemporally, but they show specific values when the Hwangsa event occurred. Satellite images, airmass backward trajectory modeling, and comparison with Sr–Nd isotopic ratios and rare earth elements compositions of soils and desert sands of northern China all suggest the major source of dust particles for the late April 2006 Hwangsa event to be the Mu Us Desert in northern China. Dust particles of the pre-Hwangsa period include both background dusts and the previous Hwangsa event dust particles, and they are interpreted to have been originated from various arid regions of China such as the Hobq Desert, the Mu Us Desert, and the Taklamakan Desert in different times. Different background dust sources during pre-Hwangsa period in early 2006 resulted from the changing route of the westerlies.     

Successful outcome following prenatal intervention in a female fetus with bladder outlet obstruction

Bladder outlet obstructions are a diverse and heterogeneous group of developmental abnormalities that generally involve obstruction of the proximal urethra in the male fetus. Indications for prenatal intervention are few and are usually restricted to the male fetus because bladder outlet obstruction in female fetuses is usually caused by complex cloacal development anomalies. We report on a female fetus with an enlarged bladder and a dilated proximal urethra (known as typical keyhole sign). A vesicoamniotic shunt was performed despite non-reassuring prognostic factors, but the procedure resulted in a successful outcome. We propose that in selected cases of bladder outlet obstruction, fetal intervention should be considered even when the fetus is female. Copyright © 2005 John Wiley & Sons, Ltd.     

Recovery of iron oxide and calcium chloride from an iron-rich chloride waste using calcium carbonate

Journal of Material Cycles and Waste Management - The ilmenite-chloride process has used for the production of TiCl4 from the ilmenite (FeTiO3) ore, which produces cyclone dust containing mostly...     

Significance of adverse outcome pathways in biomarker-based environmental risk assessment in aquatic organisms

In environmental risk assessments (ERA), biomarkers have been widely used as an early warning signal of environmental contamination. However, biomarker responses have limitation due to its low relevance to adverse outcomes (e.g., fluctuations in community structure, decreases in population size, and other similar ecobiologically relevant indicators of community structure and function). To mitigate these limitations, the concept of adverse outcome pathways (AOPs) was developed. An AOP is an analytical, sequentially progressive pathway that links a molecular initiating event (MIE) to an adverse outcome. Recently, AOPs have been recognized as a potential informational tool by which the implications of molecular biomarkers in ERA can be better understood. To demonstrate the utility of AOPs in biomarker-based ERA, here we discuss a series of three different biological repercussions caused by exposure to benzo(a)pyrene (BaP), silver nanoparticles (AgNPs), and selenium (Se). Using mainly aquatic invertebrates and selected vertebrates as model species, we focus on the development of the AOP concept. Aquatic organisms are suitable bioindicator species whose entire lifespans can be observed over a short period; moreover, these species can be studied on the molecular and population levels. Also, interspecific differences between aquatic organisms are important to consider in an AOP framework, since these differences are an integral part of the natural environment. The development of an environmental pollutant-mediated AOP may enable a better understanding of the effects of environmental pollutants in different scenarios in the diverse community of an ecosystem.     

Anthropogenic mercury emission inventory with emission factors and total emission in Korea

Mercury emissions concentrations, emission factors, and the total national emission from major anthropogenic sources in Korea for the year 2007 were estimated. Uncontrolled and controlled mercury emission factors and the total emission from each source types are presented. The annual national mercury emission from major anthropogenic sources for the year 2007, on average was 12.8 ton which ranged from 6.5 to 20.2 ton. Averaged emissions of elemental, oxidized, and particulate mercury were estimated at 8.25 ton, 3.69 ton, and 0.87 ton, respectively. Due to the removal of a major portion of particulate and oxidized mercury species, elemental mercury was dominant in stack emission. About 54.8% of mercury emission was contributed by industrial sources, 45.0% by stationary combustion sources and 0.02% by mobile sources. Thermal power plants, oil refineries, cement kilns and incinerators (municipal, industrial, medical, sewage sludge) were the major mercury emitters, contributing about 26%, 25%, 21% and 20%, respectively to the total mercury emission. Other sources (crematory, pulp and paper manufacturing, nonferrous metals manufacturing, glass manufacturing) contributed about 8% of the total emission. Priority should be given in controlling mercury emissions from coal-fired power plants, oil refineries, cement kilns and waste incinerators. More measurements including natural and re-emission sources are to be carried out in the future in order to have a clear scenario of mercury emission from the country and to apply effective control measures.     

Efforts to develop regulations in Korea similar to the US maximum achievable control technology (MACT) regulations for hazardous waste incinerators

The development of regulations patterned after the United States’ requirement for maximum achievable control technology (MACT) to control hazardous air pollutants from major industrial sources in Korea is in progress. Current management practices and installed air pollution control devices were surveyed; emission tests and continuous emission data collected from facilities under operation were assessed considering other MACT requirements such as reporting, report keeping requirements. Emission sampling and air pollutant analysis were carried out at representative hazardous waste incinerators installed with wet-type and dry-type air pollution control devices. Korean and United States Environmental Protection Agency methods were used for sampling and analysis. The major heavy metals emitted were Zn, Ni, Pb, and Cr. The heavy metal removal efficiency of existing air pollution control devices was greater than 99%. The average mercury removal efficiency was more than 30%. Toluene; m,p-xylene; o-xylene; benzene; dichloromethane; styrene; ethylbenzene; 1,3-dichlorobenzene; and 1,2,4-trimethylbenzene were the major volatile organic compounds emitted. The emissions from field tests were compared, reviewed, and analyzed with respect to MACT regulations to check applicability. Finally, draft guidelines were suggested for effective hazardous air pollutant management in Korea.     

Behavior of buoyancy and momentum controlled hydrogen jets and flames emitted into the quiescent atmosphere

As an effort to improve the prediction of hydrogen dispersion in the atmosphere, effects of buoyancy acting on the hydrogen jets formed by releasing from high pressure vessels are investigated analytically and experimentally. For the analytical study, an integral analysis for buoyant jets and flames is carried out to yield the closed formula describing the jet and flame shapes, including their trajectory and horizontal and vertical lengths corresponding to the critical concentrations. Because the density of hydrogen after releasing from high pressure storage conditions is much close to that of helium than that of hydrogen at room temperature, helium is used as the hydrogen surrogate for the buoyant jet experiments, which were performed by visualizing the jet dispersing in the atmosphere up to the jet Reynolds number Re ～ 2400. The trajectories obtained by the integral analysis and experiments agree relatively well until the transition to turbulence occurs. A further estimate for jets and flames is made by using the integral analysis as a preliminary design to the experiments involving a much greater hydrogen release. Once the comparative investigation of the larger scale experiments with the integral analysis, we anticipate that a more universal hydrogen jet and flame data can be obtained, which perhaps leads to a better safety distance of hydrogen stations.     

Development of a SWAT Patch for Better Estimation of Sediment Yield in Steep Sloping Watersheds1

Abstract: The watershed scale Soil and Water Assessment Tool (SWAT) model divides watersheds into smaller subwatersheds for simulation of rainfall‐runoff and sediment loading at the field level and routing through stream networks. Typically, the SWAT model first needs to be calibrated and validated for accurate estimation through adjustment of sensitive input parameters (i.e., Curve Number values, USLE P, slope and slope‐length, and so on). However, in some instances, SWAT‐simulated results are greatly affected by the watershed delineation and Digital Elevation Models (DEM) cell size. In this study, the SWAT ArcView GIS Patch II was developed for steep sloping watersheds, and its performance was evaluated for various threshold values and DEM cell size scenarios when delineating subwatersheds using the SWAT model. The SWAT ArcView GIS Patch II was developed using the ArcView GIS Avenue program and Spatial Analyst libraries. The SWAT ArcView GIS Patch II improves upon the SWAT ArcView GIS Patch I because it reflects the topographic factor in calculating the field slope‐length of Hydrologic Response Units in the SWAT model. The simulated sediment value for 321 subwatersheds (watershed delineation threshold value of 25 ha) is greater than that for 43 subwatersheds (watershed delineation threshold value of 200 ha) by 201% without applying the SWAT ArcView GIS Patch II. However, when the SWAT ArcView GIS Patch II was applied, the difference in simulated sediment yield decreases for the same scenario (i.e., difference in simulated sediment with 321 subwatersheds and 43 subwatersheds) was 12%. The simulated sediment value for DEM cell size of 50 m is greater than that for DEM cell size of 10 m by 19.8% without the SWAT ArcView GIS Patch II. However, the difference becomes smaller (3.4% difference) between 50 and 10 m with the SWAT ArcView GIS Patch II for the DEM scenarios. As shown in this study, the SWAT ArcView GIS Patch II can reduce differences in simulated sediment values for various watershed delineation and DEM cell size scenarios. Without the SWAT ArcView GIS Patch II, variations in the SWAT‐simulated results using various watershed delineation and DEM cell size scenarios could be greater than those from input parameter calibration. Thus, the results obtained in this study show that the SWAT ArcView GIS Patch II should be used when simulating hydrology and sediment yield for steep sloping watersheds (especially if average slope of the subwatershed is >25%) for more accurate simulation of hydrology and sediment using the SWAT model. The SWAT ArcView GIS Patch II is available at http://www.EnvSys.co.kr/~swat for free download.