Heavy metal accumulation in Halimione portulacoides: intra- and extra-cellular metal binding sites

Salt marsh plants can sequestrate and inherently tolerate high metal concentrations found in salt marsh sediments. This work intended to understand the Halimione portulacoides (L.) Aellen strategies to prevent metal toxicity, by investigating the metal location in different plant organs and in the cell. A sequential extraction was performed on leaves, stems and roots of H. portulacoides in order to determine and compare the metal (Zn, Pb, Co, Cd, Ni and Cu) concentration in several fractions of the plant material (ethanolic, aqueous, proteic, pectic, polissacaridic, lenhinic and cellulosic). This study shows that all plant organs of H. portulacoides mostly retain metals in the cell wall (65% is the average for all studied metals stored in the root cell wall, 55% in the stems and 53% in the leaves), and the metal content in the intracellular compartment is much lower (21% in roots, 25% in stems and 32% in leaves). High levels of heavy metal in the sedimentary environment do not cause toxicity to H. portulacoides, because H. portulacoides immobilizes them in different cell compartments (cell wall+proteic fraction+intracellular) outside key metabolic sites.     

Phylogenetic diversity and functional characterization of the Manila clam microbiota: a culture-based approach

According to the hologenome theory, the microbiota contributes to the fitness of the holobiont having an important role in its adaptation, survival, development, health, and evolution. Environmental stress also affects the microbiota and its capability to assist the holobiont in coping with stress factors. Here, we analyzed the diversity of cultivable bacteria associated with Manila clam tissues (mantle, gills, hemolymph) in two non-contaminated sites (Portugal and France) and one metal-contaminated site (Portugal). A total of 240 isolates were obtained. Representative isolates (n = 198) of the overall diversity were identified by 16S rDNA sequencing and subjected to functional characterization. Isolates affiliated with Proteobacteria, Actinobacteria, Firmicutes, and Bacteroidetes. Proteobacteria (mostly Pseudoalteromonadaceae and Vibrionaceae) were dominant in non-contaminated sites while Actinobacteria (mostly Microbacteriaceae) dominated in the metal-contaminated site. The main factor affecting the microbiota composition was contamination. No significant differences were observed between clam tissues and geographic regions. Several isolates tested positive for antibacterial activity, biofilm formation, protease, and siderophore production. The results show that the Manila clam harbors a diverse microbiota that may contribute to clam protection and overall fitness, as well as to its adaptation to stressful environments. In addition, the Manila clam microbiota is revealed as a promising source of novel probiotics with potential application in aquaculture.     

Energy rating methodology for light-duty vehicles: geographical impact

The aim of this paper was to describe a new energy dependency score methodology and its consequent application to cars sold in twelve regions: Europe (EU-28) and eleven specific countries worldwide (Australia, Brazil, China, India, Japan, Norway, Portugal, Russia, Saudi Arabia, South Africa and USA). This methodology was developed as a potential tool to inform consumers of their choice impact on the country’s economy. This methodology is based on primary energy assessments and origins for each energy pathway associated with a gasoline-, diesel-, natural gas (used for H₂ production)- or electricity (balanced with country electricity mix)-powered vehicle. An energy dependency index was attributed to the best-case (100 % endogenous production) and worst-case (0 % endogenous production) scenarios and consequently weighted with vehicle fuel consumption. This enabled obtaining an energy dependency index (10–0). This index could be assigned to an environmental and social index to provide a sustainability index and therefore complement a road vehicle environmental rating system, providing a combined index rating. Internal combustion engine vehicles and hybrid vehicles (that have oil products as energy source) rate the lowest for almost all locations, with the exception of regions that are energy independent (Norway, Saudi Arabia or Russia). Electric vehicles rank higher when comparing to the other technologies analyzed for all locations in this study. The plug-in hybrid electric vehicle shows generally a rank in an intermediate place, except for Japan where it scores lower than all other technologies.     

The effects of different CCS technological scenarios on EU low-carbon generation mix

Carbon capture and storage technology (CCS), a technology to reduce the emissions in coal and gas power generation plants, will play an important role in the achievement of the European Union emissions reduction objective. In the European Union, energy policies are articulated around three different elements: measures to promote renewable energy technologies, the emissions certificates system and both energy-saving and energy-efficiency policies. The succession of directives and communications from the EU Commission on renewable technology generation share targets and the implementation of the European Emissions Market exemplify the serious EU commitment to a more environmentally friendly future. CCS technologies—together with RES technologies—are thus key to achieve the European emissions reduction target. Although the CCS commercial availability is not guaranteed—due to a slow technological development—some institutions, such as the Institute for Prospective Technological Studies, assume, for 2030 horizon, a quick development of this technology, growing until a maximum participation of an 18 % over the fossil fuels total generation. An eventual non-availability of these technologies in 2030 could increase the cost of this objective in a 70 %. Therefore, the achievement of pollutant emissions reduction targets depends on a correct design of the European generation technologies mix, which should include CCS technologies. Nevertheless, the uncertainty about the final costs and economic risk of these technologies makes a question about their future role to arise. This paper analyses the effects of different variations in the cost and risk of the CCS technologies (scenarios) over the European power technologies mix. The results confirm the need of the availability of these technologies in 2030, beyond the potential costs and risks of both options. The reason lies in the methodological approach of portfolio theory, which allows an analysis from an efficient portfolio point of view.     

Seasonal changes in daily precipitation extremes in mainland Portugal from 1941 to 2007

This study aims mostly at understanding seasonal variations in the intensity, frequency and duration of extreme precipitation events in mainland Portugal. For this purpose, selected precipitation indices that mainly focus on extremes were calculated at the seasonal scale for daily data recorded in the period 1941–2007 at 57 meteorological stations scattered across the area. These indices were explored for trends at the local and regional levels. The results show that there are marked changes in precipitation indices at the seasonal scale. Trends in spring and autumn precipitation have opposite signals. In spring, statistically significant drying trends are found together with a reduction in extremes. In autumn, wetting trends are detected for all indices, although overall they are not significant at the 5 % level. In addition, the relationship between seasonal extreme precipitation indices and atmospheric large-scale modes of low-frequency variability is analysed by means of a seasonal correlation analysis. Four modes of low-frequency variability are explored. Results confirm that, over mainland Portugal, the North Atlantic Oscillation is one of the most important teleconnection patterns in any season and the mode of variability that has the greatest influence on precipitation extremes in the area, particularly in the winter and autumn.     

Ecological and biological determinants of methylmercury accumulation in tropical coastal fish

This research investigated whether environmental conditions, biological fish characteristics and anthropogenic impacts influenced mercury (Hg) assimilation into the muscle tissue of two fish species from two Brazilian bays, Ilha Grande Bay and Guanabara Bay. Fish and superficial water were collected in different periods. Hg was determined by CV-AAS. Methylmercury (MeHg) was identified and quantified by ECD-GC. Chlorophyll a concentrations in the water column indicated that Ilha Grande Bay and Guanabara Bay were oligotrophic and eutrophic, respectively. Hg in fish ranged from 2.10 to 870.17 μg kg^?1 dry wt. in Ilha Grande Bay and 40.90 to 809.24 μg kg^?1 dry wt. in Guanabara Bay. Slight differences were found between the length-normalized Hg concentrations and its percent of Hg in a voracious predator from the bays. In Guanabara Bay, where the presence of a chlor-alkali plant causes Hg input, the iliophagous fish species showed the highest length-normalized Hg concentrations and the voracious predator the lowest. Iliophagous fish is consumed by voracious predator and, consequently, acts as their MeHg food supply. Iliophagous fish from Ilha Grande Bay presented a higher percent of MeHg (80.0 %) than specimens from Guanabara Bay (54.5 %). This fact suggests that more MeHg was transferred from iliophagous fish to voracious predator in Ilha Grande Bay. At Guanabara Bay, the bioproduction is greater than that at Ilha Grande Bay, presenting the highest biomass in it ecosystem, which may subsequently dilute Hg and reduce its availability to the biota; i.e., influencing in Hg and MeHg availability throughout the food chain. Consequently, more MeHg is available in the aquatic environment of Ilha Grande Bay.     

Former DDT factory in Pakistan revisited for remediation: severe DDT concentrations in soils and plants from within the area

A factory in Amman Garh near Nowshera, Khyber Pakhtunkhwa, Pakistan, produced dichlorodiphenyltrichloroethane (DDT) from 1963–1994. Consequently, earlier papers reported a soil contamination in the per mille range inside the former factory wall (88 m?×?106 m) and up to 10 mg/kg of DDT in the surroundings in 2005–2007. The site within the factory wall was remonitored systematically in 2011 to complement the earlier data as a prerequisite for remediation, to put them in exposure context in a population developing area, and to suggest and evaluate the optimal remediation technique for the site. The contamination was drastically higher than the earlier published data, and the sum of DDT and its metabolites (ΣDDT) was up to 65 % in the soil. Grasses, shrubs, and trees growing in this severely contaminated site had 50–450 mg/kg_dw of ΣDDT. Thus, people living nearby and husbandry as well as wild animals are heavily exposed to DDT. The semiarid climate favors wind drift and deposition of the pollutant. Additionally, DDT from products of herbivore animals feeding on the contaminated plants will enter the food web. To overcome the exposure and distribution of the DDT, the site within the factory wall was capped with 1.5 m of soil. This remediation technique represents the easiest and least expensive solution. Nevertheless, DDT can still evaporate or leach, and groundwater can rise in this flood-prone area and thereby become contaminated, especially because a binding layer is missing.     

Comparison of batch, stirred flow chamber, and column experiments to study adsorption, desorption and transport of carbofuran within two acidic soils

Different methods (batch, column and stirred flow chamber experiments) used for adsorption and desorption of carbofuran studies were compared. All tested methods showed that the carbofuran adsorption was higher in the soil with the higher organic matter content, whereas the opposite behaviour was observed for the percentage of carbofuran desorbed. However, different methods have revealed some discrepancies in carbofuran adsorption/desorption kinetics. Although batch method showed interesting data on equilibrium experiments, such as a low heterogeneity for the carbofuran adsorption sites independent of soil organic matter content, it had some disadvantages for carbofuran adsorption/desorption kinetic studies. The disadvantages were related with the excessive limitations of this method on kinetics, i.e., no difference could be detected between different soils. However, with column and stirred flow chamber methods the carbofuran adsorption/desorption kinetics of different soils could be compared. Moreover, the absolute values of carbofuran adsorption/desorption and its rate were higher in the stirred flow chamber than in the batch and column experiments. Using stirred flow chamber experiments the carbofuran desorption was significantly faster than its adsorption, whereas carbofuran using column experiments they were similar. These discrepancies should be considered when the results obtained only with one method is discussed.     

Solar photocatalytic treatment of landfill leachate using a solid mineral by-product as a catalyst

The treatment of municipal solid waste landfill leachate in a pilot plant made up of solar compound parabolic collectors, using a solid industrial titanium by-product (WTiO₂) containing TiO₂ and Fe(III) as a photocatalyst, was investigated. In the study evidence was found showing that the degradation performed with WTiO₂ was mainly due to the Fe provided by this by-product, instead of TiO₂. However, although TiO₂ had very little effect by itself, a synergistic effect was observed between Fe and TiO₂. The application of WTiO₂, which produced coupled photo-Fenton and heterogeneous catalysis reactions, achieved a surprisingly high depuration level (86% of COD removal), higher than that reached by photo-Fenton using commercial FeSO₄ (43%) in the same conditions. After the oxidation process the biodegradability and toxicity of the landfill leachate were studied. The results showed that the leachate biodegradability was substantially increased, at least in the first stages of the process, and again that WTiO₂ was more efficient than FeSO₄ in terms of increasing biodegradability.     

Integrated spatiotemporal trends using TRMM 3B42 data for the Upper São Francisco River basin,Brazil

Trend analysis is an important issue for the decision-making processes. Thus, trends of rainfall, consecutive dry days (CDD), and consecutive wet days (CWD) in the Upper São Francisco River basin, Brazil, using daily rainfall data from the Tropical Rainfall Measuring Mission (TRMM) for recent 18 years, were analyzed. Instead of analyzing the trend of one average time series for one specific confidence level, a spatiotemporal analysis over the entire area with 169 continuous time series is done by applying the nonparametric Mann-Kendall and Sen tests for simultaneously 13 confidence levels and a new integrated confidence classification is proposed. The results show that the rainfall has increased during the less rainy periods (from June to October) and has decreased in the rainy periods (from November to May), with the highest and lowest confidence levels, respectively. An analysis of CDD and CWD shows that the number of CDD has decreased, while the number of CWD has increased, which revealed that the dry periods are more frequently interrupted for the period studied.