Lessons from community based management of floodplain fisheries in Bangladesh

Inland (floodplain) fisheries remain the most important contributor to fish production in Bangladesh. They have in the past been administered to generate government revenue without due concern for sustainability or equity. Community Based Fisheries Management (CBFM) is a possible solution and was tested in 19 waterbodies (rivers and beels) during 1996-2000. The outcomes so far are assessed with respect to social, institutional, and physical context, and the interactions that arose in establishing CBFM. The lessons drawn are that: it was essential that communities obtained rights over the fisheries, strong facilitation was necessary, taking up visible resource management actions greatly helped, success was more likely in homogeneous communities, external threats were a strong limiting factor, clear boundaries and small fisheries were not so critical, and new institutions could be built with as much ease (or difficulty) as modifying existing ones. Effective well-defined partnerships of NGOs and government were not easy to establish but were sufficiently beneficial that in several locations new community institutions for fisheries management were established. This is a slow process, the sustainability of local management institutions is not yet established, although they continued during an interim period without funding, further phased support is planned to strengthen these organizations and to generate evidence of impacts and momentum to influence wider fisheries policy in and beyond Bangladesh.     

Arsenic concentrations in rice, vegetables, and fish in Bangladesh: a preliminary study

Arsenic contaminating groundwater in Bangladesh is one of the largest environmental health hazards in the world. Because of the potential risk to human health through consumption of agricultural produce grown in fields irrigated with arsenic contaminated water, we have determined the level of contamination in 100 samples of crop, vegetables and fresh water fish collected from three different regions in Bangladesh. Arsenic concentrations were determined by hydride generation atomic absorption spectrophotometry. All 11 samples of water and 18 samples of soil exceeded the expected limits of arsenic. No samples of rice grain (Oryza sativa L.) had arsenic concentrations more than the recommended limit of 1.0 mg/kg. However, rice plants, especially the roots had a significantly higher concentration of arsenic (2.4 mg/kg) compared to stem (0.73 mg/kg) and rice grains (0.14 mg/kg). Arsenic contents of vegetables varied; those exceeding the food safety limits included Kachu sak (Colocasia antiquorum) (0.09-3.99 mg/kg, n=9), potatoes (Solanum tuberisum) (0.07-1.36 mg/kg, n=5), and Kalmi sak (Ipomoea reptoms) (0.1-1.53 mg/kg, n=6). Lata fish (Ophicephalus punctatus) did not contain unacceptable levels of arsenic. These results indicate that arsenic contaminates some food items in Bangladesh. Further studies with larger samples are needed to demonstrate the extent of arsenic contamination of food in Bangladesh.     

Current scenario and challenges of plastic pollution in Bangladesh: a focus on farmlands and terrestrial ecosystems

● A global snapshot of plastic waste generation and disposal is analysed. ● Effect of plastic pollution on environment and terrestrial ecosystem is reviewed. ● Ecotoxicity and food security from plastic pollution is discussed. Plastic is considered one of the most indispensable commodities in our daily life. At the end of life, the huge ever-growing pile of plastic waste (PW) causes serious concerns for our environment, including agricultural farmlands, groundwater quality, marine and land ecosystems, food toxicity and human health hazards. Lack of proper infrastructure, financial backup, and technological advancement turn this hazardous waste plastic management into a serious threat to developing countries, especially for Bangladesh. A comprehensive review of PW generation and its consequences on environment in both global and Bangladesh contexts is presented. The dispersion routes of PW from different sources in different forms (microplastic, macroplastic, nanoplastic) and its adverse effect on agriculture, marine life and terrestrial ecosystems are illustrated in this work. The key challenges to mitigate PW pollution and tackle down the climate change issue is discussed in this work. Moreover, way forward toward the design and implementation of proper PW management strategies are highlighted in this study.     

Evidential role of municipal solid waste and liquid effluent on environment and public health

Cities in Bangladesh produce large amounts of solid waste (SW) through various human activities which severely pollutes our native environment. As a result, SW pollutes the three basic environmental elements (air, water, and soil) by increasing pathogenic microbial load, which might be hazardous to public health directly or indirectly. In this study, we conducted 30 samples (i.e., soil, water, and air) collected from areas where municipal solid wastes are dumped (Tangail Sadar Upazila, Bangladesh). All the samples were analyzed to assess bacteriological quality for presumptive viable and coliform count using different agar media. We performed serial dilution 10⁻³–10⁻¹⁰ times for soil and water samples, and the diluted samples were spread on Mac-Conkey agar and nutrient agar plates. For the air sample, the sterile media containing petri-dish was placed adjacent to the dumpsite of the municipal waste and kept for an hour. Then all the samples were incubated at 37°C overnight for total viable count (TVC) and total coliform count (TCC). Biochemical tests and PCR were performed for the identification of these microorganisms. The antibiogram study was performed to reveal their (identified bacteria) susceptibility against clinically used antibiotics according to the standard disk diffusion technique. The highest bacterial loads were found in the air: TVC 3.273 × 10³ and TCC 1.059 × 10³ CFU/plate; tube-well water: TVC 8.609 × 10³, and TCC 8.317 × 10³ CFU/mL; in surface water: TVC 6.24 × 10¹³ CFU/mL and TCC 2.2 × 10¹² CFU/mL; in soil: TVC 2.88 × 10¹¹ and TCC 1.02 × 10¹¹ CFU/g, respectively. Microbes from SW can be transmitted through air, dust particles, or flies, and here we found an average of 1120 microbes spread over 63.61 cm² area per hour. Eight bacterial isolates (Pseudomonas spp., Klebsiella spp., E. coli, Proteus spp., V. cholera, Salmonella spp., Shigella spp., and Vibrio spp.) were identified by the biochemical test. Among them, E. coli and Shigella spp. were further ensured by PCR targeting bfpA and ipaH genes. Antibiotic susceptibility test results showed that E. coli isolates were highly resistant to erythromycin (80%); Shigella spp. were resistant to nalidixic acid (90%), whereas Salmonella spp. was found resistant to kanamycin (90%). Vibrio spp. were also resistant to azithromycin (80%) and erythromycin (80%), which should be a great concern for us. A semi-structured survey revealed that 63% of respondents suffered from different clinical conditions (intestinal diseases) due to SW pollution. So, steps should be taken to improve the proper management and disposal of solid waste and liquid effluent to save our environment and public health.     

Synthesis of magnetite-based nanocomposites for effective removal of brilliant green dye from wastewater

Environmental Science and Pollution Research - The present study aims at evaluating the batch scale potential of cotton shell powder (CSP), Moringa oleifera leaves (ML), and magnetite-assisted...     

Health cost of salinity contamination in drinking water: evidence from Bangladesh

Environmental Economics and Policy Studies - This study estimates health cost of salinity contamination in drinking water in the severe salinity affected three south-western districts of...     

Exploring future agricultural development and biodiversity in Uganda,Rwanda and Burundi: a spatially explicit scenario-based assessment

Regional Environmental Change - Competition for land is increasing as a consequence of the growing demands for food and other commodities and the need to conserve biodiversity and ecosystem...     

Arsenic in the food chain and assessment of population health risks in Bangladesh

The most consumed food samples of cereals (rice, maize and wheat), vegetables (lentil, brinjal, carrot, bean, potato, tomato, onion and chili), fruits (banana, mango and jackfruit), fish (taki, rui, pangas and tilapia), egg (chicken and duck), milk (cow) and meat (chicken, duck, beef and mutton) were collected from some markets of Bogra district northern part of Bangladesh to evaluate the levels of arsenic (As) and associated health risk to the adult’s and child inhabitants. Arsenic is a highly toxic element, and its presence in food composites is a matter of concern to the world scientists. Target hazard quotients (THQs) and target carcinogenic risk were calculated to evaluate the non-carcinogenic and carcinogenic health risk from ingested arsenic. The highest and the lowest mean concentrations of arsenic were noted in the Tilapia fish [(0.94 mg/kg, wet weight (ww)] and beef (0.012 mg/kg, ww). The daily intakes of arsenic via foodstuffs were 1.92 and 3.30 µg/kg-bw/day for rural adults and children and 1.69 and 3.04 µg/kg-bw/day for urban adults and children, respectively. The result shows the highest THQs of arsenic in cereals and vegetables for both the rural and urban inhabitants which exceed the safe limit (>1) indicating that cereals and vegetables are the main food items contributing to the potential health risk. The estimated target cancer risks from ingesting dietary arsenic all exceeded 10^?6, indicating increased risk of cancer for adults and children in the study area.     

Optimizing booster chlorination in water distribution networks: a water quality index approach

The optimization of chlorine dosage and the number of booster locations is an important aspect of water quality management in distribution networks. Booster chlorination helps to maintain uniformity and adequacy of free residual chlorine concentration, essential for safeguarding against microbiological contamination. Higher chlorine dosages increase free residual chlorine concentration but generate harmful by-products, in addition to taste and odor complaints. It is possible to address these microbial, chemical, and aesthetic water quality issues through free residual chlorine concentration. Estimating a water quality index (WQI) based on regulatory chlorine thresholds for microbial, chemical, and aesthetics criteria can help engineers make intelligent decisions. An innovative scheme for maintaining adequate residual chlorine with optimal chlorine dosages and numbers of booster locations was established based on a proposed WQI. The City of Kelowna (BC, Canada) water distribution network served to demonstrate the application of the proposed scheme. Temporal free residual chlorine concentration predicted with EPANET software was used to estimate the WQI, later coupled with an optimization scheme. Preliminary temporal and spatial analyses identified critical zones (relatively poor water quality) in the distribution network. The model may also prove useful for small or rural communities where free residual chlorine is considered as the only water quality criterion.     

Synthesis,characterization, and systematic studies of a novel aluminum selective chelating resin

A procedure is detailed for the selective analysis of trace aluminum by flame atomic absorption spectrophotometer coupled with off-line column separation and preconcentration. Chelating resin was synthesized by covalent functionalization of Amberlite XAD-16 by 2-(2-hydroxyphenyl) benzoxazole. The modified resin was characterized using FT-IR spectroscopy, energy dispersive x-ray analysis, elemental analysis, thermogravimetric analysis/differential thermal analysis, and minimum energy run. The optimum sorption was at pH 9?±?0.1 with corresponding t _1/2 of only 7 min. Many competitive anions and cations studied did not interfere at all in the selective determination of Al(III), at the optimized conditions. The resin shows maximum sorption capacity of 21.58 mg g^?1 and can be regenerated up to 75 cycles without any discernible capacity loss. The Langmuir isotherm model provides the better correlation of the experimental data (r ²?=?0.999) in comparison to Freundlich isotherm model, while the Scatchard analysis revealed homogeneous binding sites in the chelating resin. Analytical figures of merit were evaluated by accuracy (standard reference materials and recovery experiment), precision (RSD <5 %), and detection limit (2.8 μg L^?1). The applicability was demonstrated by analysis of trace aluminum in biological, environmental, and food samples.