Enhancement of conservation knowledge through increased access to botanical information

Herbarium specimens are increasingly recognized as an important resource for conservation science and virtual herbaria are making specimens freely available to a wider range of users than ever before. Few virtual herbaria are designed with conservation use as a primary driver. Exceptionally, Brazil's Reflora Virtual Herbarium (RVH) was created to increase knowledge and conservation of the Brazilian flora. The RVH is closely integrated with the Flora of Brazil 2020 platform on which Brazil's new national Flora is under construction. Both resources are accessible via the Reflora home page and thousands of users move seamlessly between these Reflora resources. To understand how the Reflora resources are currently used and their impact on conservation science, we conducted a literature review and an online survey. We searched for publications of studies in which Reflora resources were used and publications resulting from Brazilian researchers who were part of Reflora's research and mobility program. The survey contained multiple choice questions and questions that required a written response. We targeted Reflora webpage visitors with the survey to capture a wider range of Reflora users than the literature review. Reflora resources were used for a variety of conservation-relevant purposes. Half the 806 scientific publications in which Reflora was cited and 81% of the 1069 survey respondents accessing Reflora resources mentioned conservation-relevant research outputs. Most conservation-relevant uses of the Reflora resources in scientific publications were research rather than implementation focused. The survey of Reflora users showed conservation uses and impacts of virtual herbaria were more numerous and diverse than the uses captured in the literature review. Virtual herbaria are vital resources for conservation science, but they must document use and impacts more comprehensively to ensure sustainability.     

Incorporating uncertainty in a chemical leaching assessment

Pesticide leaching models are being used to assist in the regulation and management of pesticides by indicating their potential for leaching to groundwater. Uncertainty in model input data is not, regrettably, included in most pesticide leaching assessments. In the work described here, we use logarithmic transformations of the attenuation factor (AF), a simple process-based index model, to represent uncertainty in a pesticide leaching assessment. Characterization of a wide range of pesticides as `leachers' or `non-leachers' for a specific Hawaii hydrogeological setting is facilitated by comparing the log-transformed AF, designated AFR, for each chemical with two reference chemicals for which leaching behavior in Hawaii is known. Defining a mean and uncertainty interval for the AFR index of each chemical being ranked provides a practical method of incorporating data uncertainty into a regulatory protocol.     

Use of Tracer Gas for Direct Calibration of Emission-Factor Measurements in a Traffic Tunnel

ABSTRACT

Pollutant measurements in traffic tunnels have been used to estimate motor-vehicle emissions for several decades. The objective in this type of study is to use the traffic tunnel as a tool for characterizing motor vehicles rather than seeking a tunnel design with acceptably low pollutant concentrations. In the past, very simple aerodynamic models have been used to relate measured concentrations to vehicle emissions. Typically, it is assumed that velocities and concentrations are uniform across the tunnel cross section. In the present work, a vehicle emitting a known amount of sulfur hexafluoride (SF₆) was driven repeatedly through a 730-m-long traffic tunnel in Vancouver, Canada. Comparing the measured SF₆ concentrations to the known emission rates, it is possible to directly assess the accuracy of the simple tunnel aerodynamic models typically used to interpret tunnel data. Correction factors derived from this procedure were then applied to measurements of carbon monoxide and other pollutants to obtain gram-per-kilometer emission factors for vehicles. Although the specific correction factors measured here are valid only for the tunnel tested, the magnitude of the factors (up to two or more) suggests that the phenomena observed here should be considered when interpreting data from other tunnels.     

A Simple Assay for Monitoring Cellulose in Paper-Spiked Soil

We describe a simple method for measuring cellulose in soil. We used this method to measure the recovery of shredded office paper and pure medium fiber cellulose added to a Helvetia silt loam clay soil. This method consists of solvating cellulose from soil with 77% H₂SO₄ and analysis of the cellulose recovered by the phenol-sulfuric acid carbohydrate assay. Unlike previous related methods the modifications we propose allow good recovery of cellulose (~99%) and eliminate the need to autoclave the samples. We verified this method on soil spiked with up to 12% cellulose and found a good linear relationship between the amounts of cellulose added relative to that recovered. With proper fragmentation and dilution of the acid-treated soil samples, higher concentrations can be easily measured. We propose this technique as a robust and high throughput means to monitor the degradation of cellulose in paper spiked soil.     

Degradation of N-nitrosodimethylamine (NDMA) in landscape soils

N-nitrosodimethylamine (NDMA), a potential carcinogen, was commonly found in treated wastewater as a by-product of chlorination. As treated water is increasingly used for landscape irrigation, there is an imperative need to understand the leaching risk for NDMA in landscape soils. In this study, adsorption and incubation experiments were conducted using landscape soils planted with turfgrass, ground cover, and trees. Adsorption of NDMA was negligibly weak (K(d) < 1) in all soils, indicating that NDMA has a high potential for moving with percolating water in these soils. Degradation of NDMA occurred at different rates among these soils. At 21 degrees C, the half-life (t(1/2)) of NDMA was 4.1 d for the ground cover soil, 5.6 d for the turfgrass soil, and 22.5 d for the tree soil. The persistence was substantially prolonged after autoclaving or when incubated at 10 degrees C. The rate of degradation was not significantly affected by the initial NDMA concentration or addition of organic and inorganic nutrient sources. The relative persistence was inversely correlated with soil organic matter content, soil microbial biomass, and soil dehydrogenase activity, suggesting the importance of microorganisms in NDMA degradation in these soils. These results suggest that the behavior of NDMA depends closely on the vegetation cover in a landscape system, and prolonged persistence and increased leaching may be expected in soils with sparse vegetation due to low organic matter content and limited microbial activity.     

The impact of the congestion charging scheme on ambient air pollution concentrations in London

On 17th February 2003, a congestion charging scheme (CCS), operating Monday–Friday, 07:00–18:00, was introduced in central London along with a programme of traffic management measures. We investigated the potential impact of the introduction of the CCS on measured pollutant concentrations (oxides of nitrogen (NO_X, NO and NO₂), particles with a median diameter less than 10 microns (PM₁₀), carbon monoxide (CO) and ozone (O₃)) measured at roadside and background monitoring sites across Greater London. Temporal changes in pollution concentrations within the congestion charging zone were compared to changes, over the same time period, at monitors unlikely to be affected by the CCS (the control zone) and in the boundary zone between the two. Similar analyses were done for CCS hours during weekends (when the CCS was not operating).Based on the single roadside monitor with the CCS Zone, it was not possible to identify any relative changes in pollution concentrations associated with the introduction of the scheme. However, using background monitors, there was good evidence for a decrease in NO and increases in NO₂ and O₃ relative to the control zone. There was little change in background concentrations of NO_X. There was also evidence of relative reductions in PM₁₀ and CO. Similar changes were observed during the same hours in weekends when the scheme was not operating.The causal attribution of these changes to the CCS per se is not appropriate since the scheme was introduced concurrently with other traffic and emissions interventions which might have had a more concentrated effect in central London. This study provides important pointers for study design and data requirements for the evaluation of similar schemes in terms of air quality. It also shows that results may be unexpected and that the overall effect on toxicity may not be entirely favourable.     

Development and validation of the volatile correction model for PM10 – An empirical method for adjusting TEOM measurements for their loss of volatile particulate matter

EU Directives stipulate that PM₁₀ should be measured using the gravimetric reference method as laid out in EN12341 [CEN, 1998. Air Quality – Determination of the PM₁₀ Fraction of Suspended Particulate Matter – Reference Method and Field Test Procedure to Demonstrate Reference Equivalence of Measurement Methods. European Committee for Standardisation], or an equivalent method as demonstrated using EC guidance [EC, 2005. Demonstration of Equivalence of Ambient Air Monitoring Methods. European Commission Working Group on Guidance for the Demonstration of Equivalence]. There is however a conflict between the requirement to measure PM₁₀ using the gravimetric reference method and the need for rapid public reporting, and many member states, including the UK, rely on non-gravimetric techniques to measure PM₁₀. In the UK the majority of PM₁₀ measurements are made using the Tapered Element Oscillating Microbalance (TEOM), which does not meet the equivalence criteria [Harrison, D., 2006. UK Equivalence Programme for Monitoring of Particulate Matter. Defra, London]. The implied need to upgrade or replace TEOMs with an equivalent automated measurement technique has significant cost implications. The model described in this paper was based on analysis of daily mean measurements of PM₁₀ by the Filter Dynamics Measurement System (FDMS) and the TEOM at UK sites. It uses the FDMS measurement of the volatile component of PM₁₀ (referred to here as FDMS purge) to correct for differences in the sensitivity to volatile PM₁₀ between the TEOM and the EU gravimetric reference method. The model equation for the correction of TEOM PM₁₀ measurements is: TEOM_VCM = TEOM ? 1.87 FDMS purge due to the regional homogeneity of volatile PM, the FDMS purge concentration may be measured at a site distant to the TEOM, allowing the possibility of using a single FDMS instrument to correct PM₁₀ measurements made by several TEOMs in a defined geographical area. The model was assessed against the criteria for the EC Working Group's Guidance for the Demonstration of Equivalence of Ambient Air Monitoring Methods [EC, 2005. Demonstration of Equivalence of Ambient Air Monitoring Methods. European Commission Working Group on Guidance for the Demonstration of Equivalence]. The model satisfies the equivalence criteria using remote FDMS purge measurements for distances up to 200 km (in 22 out of 23 data sets). These data provide strong evidence that the model is a viable tool for correcting measurements from TEOM instruments on the national and local government networks.     

Survival potential of Escherichia coli and Enterococci in subtropical beach sand: implications for water quality managers

Fecal bacteria have traditionally been used as indicator organisms to monitor the quality of recreational waters. Recent work has questioned the robustness of traditional indicators, particularly at seawater bathing beaches. For example, a study of Florida beaches found unexpectedly high abundances of Escherichia coli, fecal coliforms, and enterococci in beach sand. The aim of the present study was to explain these abundances by assessing the survival of E. coli and enterococci in beach sand relative to seawater. We used a combination of quantitative laboratory mesocosm experiments and field observations. Results suggested that E. coli and enterococci exhibited increased survivability and growth in sand relative to seawater. Because fecal bacteria are capable of replicating in sand, at least under controlled laboratory conditions, the results suggest that sand may be an important reservoir of metabolically active fecal organisms. Experiments with "natural" mesocosms (i.e., unsterilized sand or water rich in micropredators and native bacteria) failed to show the same increases in fecal indicators as was found in sterile sand. It is postulated that this was due to predation and competition with indigenous bacteria in these "natural" systems. Nonetheless, high populations of indicators were maintained and recovered from sand over the duration of the experiment as opposed to the die-off noted in water. Indicator bacteria may wash out of sand into shoreline waters during weather and tidal events, thereby decreasing the effectiveness of these indicators as predictors of health risk and complicating the interpretations for water quality managers.     

Compost amendment of Cu-Zn minespoil reduces toxic bioavailable heavy metal concentrations and promotes establishment and biomass production of Bromus carinatus (Hook and Arn.)

A series of lab and greenhouse studies were undertaken to understand how Cu and Zn toxicity influences Bromus carinatus (Hook and Arn.) growth, to what degree an organic amendment (yard waste compost) may reduce Cu and Zn bioavailability in Cu-Zn minespoil and promote plant growth in combination with fertilizer, and how the vertical distribution of compost in the minespoil influences rooting depth. Root Cu and Zn toxicity thresholds were determined to be 1 mgL(-1) and 10 mgL(-1) in solution, respectively. The compost amendment had exceptionally high Cu and Zn binding capacities (0.17 and 0.08 g metal g C(-1), for Cu and Zn, respectively) that were attributed to high compost humic and fulvic acid concentrations. Maximum plant biomass was achieved when minespoil was amended with compost and fertilizer in combination. Fertilizer alone had no effect on plant growth. Mixing compost into the minespoil was essential to promote adequate rooting depth.