Management strategy impacts on ammonia volatilization from swine manure

Ammonia emitted from manure can have detrimental effects on health, environmental quality, and fertilizer value. The objective of this study was to measure the potential for reduction in ammonia volatilization from swine (Sus scrofa domestica) manure by temperature control, stirring, addition of nitrogen binder (Mohave yucca, Yucca schidigera Roezl ex Ortgies) or urease inhibitor [N-(n-butyl) thiophosphoric triamide (NBPT)], segregation of urine from feces, and pH modification. Swine manure [total solids (TS) = 7.6-11.2%, total Kjeldahl nitrogen (TKN) = 3.3-6.2 g/L, ammonium nitrogen NH(+)(4)-N = 1.0-3.3 g/L] was stored for 24, 48, 72, or 96 h in 2-L polyvinyl chloride vessels. The manure was analyzed to determine pre- and post-storage concentrations of TS and volatile solids (VS), TKN, and NH(+)(4)-N. The concentration of accumulated ammonia N in the vessel headspace (HSAN), post-storage, was measured using grab sample tubes. Headspace NH(3) concentrations were reduced 99.3% by segregation of urine from feces (P < 0.0001). Stirring and NBPT (152 microL/L) increased HSAN concentration (119 and 140%, respectively). Headspace NH(3) concentration increased by 2.7 mg/m(3) for every 1 degree C increase in temperature over 35 degrees C. Slurry NH(+)(4)-N concentrations were reduced by segregation (78.3%) and acidification to pH 5.3 (9.4%), and increased with stirring (4.8%) and increasing temperature (0.06 g/L per 1 degree C increase in temperature over 35 degrees C). Temperature control, urine-feces segregation, and acidification of swine manure are strategies with potential to reduce or slow NH(+)(4)-N formation and NH(3) volatilization.     

Assessing a Quick Monitoring Method Using Rocky Intertidal Communities as a Bioindicator: A Multivariate Approach in Algeciras Bay

A multivariate approach was used to test the value of intertidal communities as a bioindicator of environmental conditions at Algeciras Bay, southern Spain. The study area is located in the Strait of Gibraltar and it is subjected to a variety of anthropic impacts. Eight localities (5 inside and 3 outside the bay) were selected, and four transects were undertaken in each locality to characterise the fauna and flora. The spatial distribution of the intertidal species reflected the physico-chemical conditions of Algeciras Bay. The stations located outside the bay, characterised by high hydrodynamism and dissolved oxygen and low sedimentation and turbidity, had a higher diversity and species richness than the inner stations. According to the BIO-ENV procedure and CCA, water turbidity was the factor which best correlated with the intertidal assemblages. SIMPER showed that the molluscs Chtamalus stellatus, Mytilus cf edulis, Littorina neritoides and Balanus perforatus, and the algae Gelidium pusillum, Corallina elongata, Asparagopsis armata, Colpomenia sinuosa and Fucus spiralis were the species that most contributed to the dissimilarity between internal and external sites. The present study, based on the spatial distribution of intertidal taxa, yielded similar results to those previously obtained in the area with costly physico-chemical analysis based on complex matrices of subtidal epifaunal communities. Consequently, the intertidal sampling method proposed in this study is presented here as a quick, effective alternative strategy, and can be useful in environmental monitoring programs, since these communities are easily accessible and amenable to sample, and the sessile nature of the majority of the species makes future, long-term monitoring relatively simple.     

Effect of biosurfactants on crude oil desorption and mobilization in a soil system

Microbially produced biosurfactants were studied to enhance crude oil desorption and mobilization in model soil column systems. The ability of biosurfactants from Rhodococcus ruber to remove the oil from the soil core was 1.4-2.3 times greater than that of a synthetic surfactant of suitable properties, Tween 60. Biosurfactant-enhanced oil mobilization was temperature-related, and it was slower at 15 degrees C than at 22-28 degrees C. Mathematical modelling using a one-dimensional filtration model was applied to simulate the process of oil penetration through a soil column in the presence of (bio)surfactants. A strong positive correlation (R(2)=0.99) was found between surfactant penetration through oil-contaminated soil and oil removal activity. Biosurfactant was less adsorbed to soil components than synthetic surfactant, thus rapidly penetrating through the soil column and effectively removing 65-82% of crude oil. Chemical analysis showed that crude oil removed by biosurfactant contained a lower proportion of high-molecular-weight paraffins and asphaltenes, the most nonbiodegradable compounds, compared to initial oil composition. This result suggests that oil mobilized by biosurfactants could be easily biodegraded by soil bacteria. Rhodococcus biosurfactants can be used for in situ remediation of oil-contaminated soils.     

Social Approval of the Community Assessment Model for Odor Dispersal: Results from a Citizen Survey

Odors emitted from US Midwest hog production facilities present farmers, residents, and state regulatory agencies with a set of complex challenges. To predict odor exposure from multiple swine production sources simultaneously, and to determine siting recommendations for proposed new or enlarged hog facilities, researchers at Iowa State University designed the community assessment model for odor dispersion (CAM). A three-county citizen survey conducted in Iowa examined the level of hypothetical social acceptance of the modeling process, and level of trust in CAM results. While 69 % of respondents approved of modeling as a way to determine the most socially appropriate location for production sites, only 35 % would trust the results if potential odor exposure from a new facility were proposed to be built near their home. We analyzed approval of the CAM model, and level of trust, across a number of demographic, attitudinal, and belief factors regarding environmental quality and the hog industry. Overall, trust in CAM was uneven and varied across respondents. Those residents who would not trust CAM tended to be more concerned with environmental quality and less inclined to believe that the hog industry is critically important economically. Those who would not trust CAM results also had significantly more direct experience with odors. Findings point to predominantly positive, yet equivocal acceptance of CAM results among the citizenry, which is not unexpected given conflict typical of siting decisions in industry and waste disposal arenas. Recommendations are offered regarding the interaction of trust, beliefs and attitudes and the utility of CAM.     

Life cycle assessment of the production and use of polypropylene tree shelters

A detailed Life Cycle Assessment (LCA) has been conducted for the manufacture, use and disposal of polypropylene tree shelters, which are used to protect young seedlings in the first few years of growth. The LCA was conducted using Simapro software, the Ecoinvent database and ReCiPe assessment methodology. Detailed information on materials, manufacturing, packaging and distribution of shelters was obtained from Tubex Ltd. in South Wales, UK. Various scenarios based on different forest establishment methods, with or without tree shelters were derived and analysed using data from published literature and independent sources. The scenarios included commercial forestry in northern temperate conditions, amenity forest establishment in temperate conditions, and forest establishment in semi-arid conditions. For commercial forestry, a reduction in required seedling production and planting as well as additional time-averaged wood production led to significant benefits with tree shelters, both compared to unprotected and fenced cases. For the amenity forest scenarios, tree shelter use had a net environmental impact, while for semi-arid forestry, the benefits of reduction in water use outweighed shelter production impacts. The current practice of in-situ degradation was compared to collection and disposal and it was found that in-situ degradation was slightly preferable in terms of overall environmental impact. Use of biopolymer-based shelters would improve the environmental performance slightly.     

Variations in speciated emissions from spark-ignition and compression-ignition motor vehicles in California's south coast air basin

The U.S. Department of Energy Gasoline/Diesel PM Split Study examined the sources of uncertainties in using an organic compound-based chemical mass balance receptor model to quantify the contributions of spark-ignition (SI) and compression-ignition (CI) engine exhaust to ambient fine particulate matter (PM2.5). This paper presents the chemical composition profiles of SI and CI engine exhaust from the vehicle-testing portion of the study. Chemical analysis of source samples consisted of gravimetric mass, elements, ions, organic carbon (OC), and elemental carbon (EC) by the Interagency Monitoring of Protected Visual Environments (IMPROVE) and Speciation Trends Network (STN) thermal/optical methods, polycyclic aromatic hydrocarbons (PAHs), hopanes, steranes, alkanes, and polar organic compounds. More than half of the mass of carbonaceous particles emitted by heavy-duty diesel trucks was EC (IMPROVE) and emissions from SI vehicles contained predominantly OC. Although total carbon (TC) by the IMPROVE and STN protocols agreed well for all of the samples, the STN/IMPROVE ratios for EC from SI exhaust decreased with decreasing sample loading. SI vehicles, whether low or high emitters, emitted greater amounts of high-molecular-weight particulate PAHs (benzo[ghi]perylene, indeno[1,2,3-cd]pyrene, and coronene) than did CI vehicles. Diesel emissions contained higher abundances of two- to four-ring semivolatile PAHs. Diacids were emitted by CI vehicles but are also prevalent in secondary organic aerosols, so they cannot be considered unique tracers. Hopanes and steranes were present in lubricating oil with similar composition for both gasoline and diesel vehicles and were negligible in gasoline or diesel fuels. CI vehicles emitted greater total amounts of hopanes and steranes on a mass per mile basis, but abundances were comparable to SI exhaust normalized to TC emissions within measurement uncertainty. The combustion-produced high-molecular-weight PAHs were found in used gasoline motor oil but not in fresh oil and are negligible in used diesel engine oil. The contributions of lubrication oils to abundances of these PAHs in the exhaust were large in some cases and were variable with the age and consumption rate of the oil. These factors contributed to the observed variations in their abundances to total carbon or PM2.5 among the SI composition profiles.     

Alfalfa nutritive quality for ruminant livestock as influenced by ambient air quality in west-central Alberta

Alfalfa (Medicago sativa) nutritive quality response to ambient ozone (O(3)), sulfur dioxide (SO(2)) and oxides of nitrogen (NO(x)) were assessed at three locations in west-central Alberta, Canada (1998-2002). Yield data were segregated into high and low relative to overall median yield. Ozone concentrations (hourly median and 95th-percentile) and precipitation (P) contributed 69 and 29%, respectively, to the variability in crude protein (CP) concentration in low-yielding alfalfa, whereas mean temperature (T) and relative humidity (RH) collectively influenced 98% of the variation in CP in high-yielding alfalfa. Three-fourths of the accounted variation in relative feed value (RFV) of low-yielding alfalfa was attributable to P, T and RH, whereas median and 95th-percentile hourly O(3) concentrations and SO(2) and NO(x) exposure integrals contributed 25%. In contrast, air quality, (mainly O(3)) influenced 86% of the accounted variation in RFV of high-yielding alfalfa, and T and P collectively contributed 14%.     

The groundwater contribution to surface water contamination in a region with intensive agricultural land use (Noord-Brabant, The Netherlands)

Traditionally, monitoring of soil, groundwater and surface water quality is coordinated by different authorities in the Netherlands. Nowadays, the European Water Framework Directive (EU, 2,000) stimulates an integrated approach of the complete soil-groundwater-surface water system. Based on water quality data from several test catchments, we propose a conceptual model stating that stream water quality at different discharges is the result of different mixing ratios of groundwater from different depths. This concept is used for a regional study of the groundwater contribution to surface water contamination in the Dutch province of Noord-Brabant, using the large amount of available data from the regional monitoring networks. The results show that groundwater is a dominant source of surface water contamination. The poor chemical condition of upper and shallow groundwater leads to exceedance of the quality standards in receiving surface waters, especially during quick flow periods.     

BIOCHEM-ORCHESTRA: a tool for evaluating chemical speciation and ecotoxicological impacts of heavy metals on river flood plain systems

The chemical speciation model BIOCHEM was extended with ecotoxicological transfer functions for uptake of metals (As, Cd, Cu, Ni, Pb, and Zn) by plants and soil invertebrates. It was coupled to the object-oriented framework ORCHESTRA to achieve a flexible and dynamic decision support system (DSS) to analyse natural or anthropogenic changes that occur in river systems. The DSS uses the chemical characteristics of soils and sediments as input, and calculates speciation and subsequent uptake by biota at various scenarios. Biotic transfer functions were field-validated, and actual hydrological conditions were derived from long-term monitoring data. The DSS was tested for several scenarios that occur in the Meuse catchment areas, such as flooding and sedimentation of riverine sediments on flood plains. Risks are expressed in terms of changes in chemical mobility, and uptake by flood plain key species (flora and fauna).     

The monitoring results of electromagnetic radiation of 110-kV high-voltage lines in one urban location in Chongqing P.R. China

To understand electromagnetic radiation field strength and its influencing factors of certain 110-kV high-voltage lines in one urban area of Chongqing by measuring 110-kV high-voltage line’s electromagnetic radiation level. According to the methodology as determined by the National Hygienic Standards, we selected certain adjacent residential buildings, high-voltage lines along a specific street and selected different distances around its vertical projection point as monitoring points. The levels of electromagnetic radiations were measured respectively. In this investigation within the frequency of 5–1,000 Hz both the electric field strength and magnetic field strength of each monitoring sites were lower than the public exposure standards as determined by the International Commission on Non-Ionizing Radiation Protection. However, the electrical field strength on the roof adjacent to the high-voltage lines was significantly higher than that as measured on the other floors in the same buildings (p < 0.05). The electromagnetic radiation measurements of different monitoring points, under the same high-voltage lines, showed the location which is nearer the high-voltage line maintain a consistently higher level of radiation than the more distant locations (p < 0.05). Electromagnetic radiation generated by high-voltage lines decreases proportionally to the distance from the lines. The buildings can to some extent shield (or absorb) the electric fields generated by high-voltage lines nearby. The electromagnetic radiation intensity near high-voltage lines may be mitigated or intensified by the manner in which the high-voltage lines are set up, and it merits attention for the potential impact on human health.