Interlaboratory evaluation of an extraction and fluorescence method for the determination of trace beryllium in soils

Analytical methods for the determination of trace beryllium in soils are needed so that anthropogenic sources of this element can be distinguished from native (background) levels of beryllium. In this work, a collaborative interlaboratory evaluation of a new extraction and fluorescence-based procedure for determining beryllium in soil samples was carried out to fulfil method validation requirements for ASTM International voluntary consensus standard test methods. A Canadian reference material, CCRMP Till-1 soil, with a background beryllium concentration of 2.4 microg g(-1), was selected for study. This certified reference material (CRM) was spiked and homogenized with varying levels of beryllium oxide in order to give batches of material with beryllium concentrations of 4.36 +/- 0.69, 11.5 +/- 0.7, 124 +/- 7 and 246 +/- 16 microg g(-1) (+/- values are standard deviations). In the interlaboratory study (ILS), which was carried out in accordance with an applicable ASTM International standard practice (ASTM E691), samples of these spiked soils were subjected to extraction in dilute ammonium bifluoride at approximately 90 degrees C for 40 h. Fluorescence measurement of the extracted beryllium was carried out via detection using the high quantum yield fluorophore, hydroxybenzoquinoline sulfonate (HBQS). Interlaboratory precision estimates from six participating laboratories ranged from 0.048 to 0.103 (relative standard deviations) for the five different beryllium concentrations. Pooled bias estimates resulting from this ILS were between -0.049 and 0.177 for the various beryllium levels. These figures of merit support promulgation of the analytical procedure as an ASTM International standard test method.     

Assessment of metal contamination using X-ray fluorescence spectrometry and the toxicity characteristic leaching procedure (TCLP) during remediation of a waste disposal site in Antarctica

The remediation of the Thala Valley landfill, Casey Station, East Antarctica, is part of efforts to clean-up contaminated sites associated with the Australian Antarctic Program. These sites, ranging from abandoned rubbish dumps to fuel spills, are contaminated principally with metals and petroleum hydrocarbons. Remediation success depends on accurate, cost-effective and timely--fit-for-purpose--chemical analysis of soil and water samples from the site, which is required to guide excavation, the in situ or off-site treatment and disposal of contaminated material, and to validate satisfactory remediation. Owing to the remote location of Antarctica, it is necessary to carry out chemical analyses on-site. Waste and soil contaminated with Pb, Zn, Cd, and Cu were excavated from Thala Valley for removal to Australia, treatment and disposal. Analysis of total metal concentrations in soil was performed at Casey Station with a transportable energy dispersive X-ray fluorescence (EDXRF) spectrometer. Soil samples were prepared using a simple size-fractionation method to expedite sample throughput. A method for assessing contaminant mobility in solid waste (toxicity characteristic leaching procedure, TCLP) was also used to characterise soil. Although this was more labour-intensive and time-consuming than the total metals analysis, it was of great utility because leachable metals were often significant determinants in the assessment of contaminated soil. The combined data helped managers during remediation, directing excavation and allowing waste to be classified for treatment and disposal before its return to Australia.     

Multicriteria Relocation Analysis of an Off-site Radioactive Monitoring Network for a Nuclear Power Plant

Due to increasing environmental consciousness in most countries, every utility that owns a commercial nuclear power plant has been required to have both an on-site and off-site emergency response plan since the 1980s. A radiation monitoring network, viewed as part of the emergency response plan, can provide information regarding the radiation dosage emitted from a nuclear power plant in a regular operational period and/or abnormal measurements in an emergency event. Such monitoring information might help field operators and decision-makers to provide accurate responses or make decisions to protect the public health and safety. This study aims to conduct an integrated simulation and optimization analysis looking for the relocation strategy of a long-term regular off-site monitoring network at a nuclear power plant. The planning goal is to downsize the current monitoring network but maintain its monitoring capacity as much as possible. The monitoring sensors considered in this study include the thermoluminescence dosimetry (TLD) and air sampling system (AP) simultaneously. It is designed for detecting the radionuclide accumulative concentration, the frequency of violation, and the possible population affected by a long-term impact in the surrounding area regularly while it can also be used in an accidental release event. With the aid of the calibrated Industrial Source Complex–Plume Rise Model Enhancements (ISC-PRIME) simulation model to track down the possible radionuclide diffusion, dispersion, transport, and transformation process in the atmospheric environment, a multiobjective evaluation process can be applied to achieve the screening of monitoring stations for the nuclear power plant located at Hengchun Peninsula, South Taiwan. To account for multiple objectives, this study calculated preference weights to linearly combine objective functions leading to decision-making with exposure assessment in an optimization context. Final suggestions should be useful for narrowing the set of scenarios that decision-makers need to consider in this relocation process.     

Hot filter/impinger and dilution sampling for fine particulate matter characterization from ferrous metal casting processes

A study using two stack-sampling methodologies for collecting particulate matter (PM) emissions was conducted using a hot filter followed by a cold impinger sampling train and a dilution sampler. Samples were collected from ferrous iron metal casting processes that included pouring molten iron into a sand mold containing an organic binder, metal cooling, removal of the sand from the cooled casting (shakeout), and postshakeout cooling. The shakeout process contributed more to PM emissions than the metal pouring and cooling processes. Particulate matter less than 2.5 microm in aerodynamic diameter (PM2.5) mass emissions for the entire casting cycle ranged from 3.4 to 4.7 lb/t of metal for the hot filter/impinger method and from 0.8 to 1.8 lb/t of metal for the dilution method. Most of the difference was due to PM captured by the impingers, much of which was probably dissolved gases rather than condensable vapors. Of the PM fraction captured by the impingers, 96-98% was organic in nature. The impinger PM fraction contributed 32-38% to the total suspended particle mass and caused a factor of 2-4 positive bias for PM2.5 emissions. For the pouring and cooling processes only, the factor increased to over seven times.     

Synthetic polycyclic musks in Hong Kong sewage sludge

Synthetic polycyclic musks [Cashmeran (DPMI), Celestolide (ADBI), Phantolide (AHMI), Traseolide (ATII), Tonalide (AHTN), and Galaxolide (HHCB)] were determined in dewatered sludge samples from 10 major sewage treatment plants in Hong Kong using primary treatment (PT), secondary treatment (SecT) or chemical-enhanced primary treatment (CEPT) methods. The concentrations of HHCB, AHTN, AHMI and ADBI ranged from below detection limits to 78.6mg/kg dry weight. HHCB and AHTN were the two predominant polycyclic musks in sludge samples, suggesting the extensive use of these two polycyclic musks in Hong Kong. Polycyclic musk levels in CEPT sludge were significantly higher than those in SecT and PT sludge, suggesting that CEPT sludge has a higher ability to retain polycyclic musks. Comparisons to global concentrations revealed that HHCB and AHTN concentrations detected in Hong Kong sludge ranked first and second respectively. However, the estimated levels of HHCB and AHTN in the discharged effluent from sewage treatment plants may pose low potential risks to aquatic organisms according to the threshold effect levels derived for fish. Nevertheless, the polycyclic musks released in sewage treatment plant effluents may bioconcentrate and bioaccumulate in the marine environment in Hong Kong. Therefore, monitoring studies in marine ecosystems, particularly on the two prevailing polycyclic musks, are necessary.     

Cometabolic degradation kinetics of TCE and phenol by Pseudomonas putida

Modeling of cometabolic kinetics is important for better understanding of degradation reaction and in situ application of bio-remediation. In this study, a model incorporated cell growth and decay, loss of transformation activity, competitive inhibition between growth substrate and non-growth substrate and self-inhibition of non-growth substrate was proposed to simulate the degradation kinetics of phenol and trichloroethylene (TCE) by Pseudomonas putida. All the intrinsic parameters employed in this study were measured independently, and were then used for predicting the batch experimental data. The model predictions conformed well to the observed data at different phenol and TCE concentrations. At low TCE concentrations (<2 mg l(-1)), the models with or without self-inhibition of non-growth substrate both simulated the experimental data well. However, at higher TCE concentrations (>6 mg l(-1)), only the model considering self-inhibition can describe the experimental data, suggesting that a self-inhibition of TCE was present in the system. The proposed model was also employed in predicting the experimental data conducted in a repeated batch reactor, and good agreements were observed between model predictions and experimental data. The results also indicated that the biomass loss in the degradation of TCE below 2 mg l(-1) can be totally recovered in the absence of TCE for the next cycle, and it could be used for the next batch experiment for the degradation of phenol and TCE. However, for higher concentration of TCE (>6 mg l(-1)), the recovery of biomass may not be as good as that at lower TCE concentrations.     

Exploring discourses on international environmental regime effectiveness with Q methodology: a case study of the Mediterranean Action Plan

Extensive research has been done on the 'high politics' of negotiations of international environmental agreements. However, little attention has been paid to the effectiveness of their implementation after coming into force. Effectiveness cannot be easily measured, since different stakeholders use different criteria as the basis of their opinion. The purpose of this study is to investigate discourses on the effectiveness of an international environmental regime. The regime chosen is the Mediterranean Action Plan (MAP) - and its legal framework, the Barcelona Convention - which was established in 1975 under the aegis of the United Nations Environment Programme (UNEP). Q methodology was used to reveal discourses on the effectiveness of UNEP/MAP. After collecting relevant literature and identifying the stakeholders, 25 in-depth interviews were conducted. The stakeholders were from the Secretariat of the Convention, academia, NGO workers, and others that studied or knew the subject well. From these interviews 294 statements were extracted, from which 44 were finally selected to be used in the Q study. The interviewees were approached for the second time to complete the Q sorts. This study revealed four distinct discourses concerning the effectiveness of international environmental regimes. It concludes that there is no one 'right' way of defining effectiveness and that no approach can provide more than a partial evaluation of the overall effectiveness of a regime.     

Seasonal dynamics in leachate hydrochemistry and natural attenuation in surface run-off water from a tropical landfill

Open waste dump systems are still widely used in Indonesia. The Jatibarang landfill receives 650-700 tons of municipal waste per day from the city of Semarang, Central Java. Some of the leachate from the landfill flows via several natural and collection ponds to a nearby river. The objectives of the study were to identify seasonal landfill leachate characteristics in this surface water and to determine the occurrence of natural attenuation, in particular the potential for biodegradation, along the flow path. Monthly measurements of general landfill leachate parameters, organic matter-related factors and redox-related components revealed that leachate composition was influenced by seasonal precipitation. In the dry season, electrical conductivity and concentrations of BOD, COD, N-organic matter, ammonia, sulphate and calcium were significantly higher (1.1-2.3 fold) than during the wet season. Dilution was the major natural attenuation process acting on leachate. Heavy metals had the highest impact on river water quality. Between the landfill and the river, a fivefold dilution occurred during the dry season due to active springwater infiltration, while rainwater led to a twofold dilution in the wet season. Residence time of leachate in the surface leachate collection system was less than 70 days. Field measurements and laboratory experiments showed that during this period hardly any biodegradation of organic matter and ammonia occurred (less than 25%). However, the potential for biodegradation of organic matter and ammonia was clearly revealed during 700 days of incubation of leachate in the laboratory (over 65%). If the residence time of leachate discharge can be increased to allow for biodegradation processes and precipitation reactions, the polluting effects of leachate on the river can be diminished.     

Metal contamination in the lichen Alectoria sarmentosa near the copper smelter of Murdochville, Québec

Lichens were used to evaluate the metal pollution in a forest ecosystem around the smelter of Murdochville, Canada. As reached values 5.8 times higher in the smelter vicinity than in the 'background' sites. This enrichment was 2 times higher for 3 metals (Cu, Cd and Pb). The highest As, Ba, Cd, Cu, and Pb concentrations in lichens were 4, 112, 1, 23, 50 and 952mg/kg respectively. Contamination declined exponentially with increasing distance from the smelter and was related to elevation and slope exposition to the smelter flux. (206)Pb/(207)Pb and (206)Pb/(204)Pb ratios were low close to the smelter (1.16 and 18), but increased with distance to constant values (1.19 and 18.7) and showed an inverse correlation with lead concentrations. Forest contamination was detectable up to 30km from the smelter.