Removal of ammonia solutions used in catalytic wet oxidation processes

Ammonia (NH(3)) is an important product used in the chemical industry, and is common place in industrial wastewater. Industrial wastewater containing ammonia is generally either toxic or has concentrations or temperatures such that direct biological treatment is unfeasible. This investigation used aqueous solutions containing more of ammonia for catalytic liquid-phase oxidation in a trickle-bed reactor (TBR) based on Cu/La/Ce composite catalysts, prepared by co-precipitation of Cu(NO(3))(2), La(NO(3))(2), and Ce(NO(3))(3) at 7:2:1 molar concentrations. The experimental results indicated that the ammonia conversion of the wet oxidation in the presence of the Cu/La/Ce composite catalysts was determined by the Cu/La/Ce catalyst. Minimal ammonia was removed from the solution by the wet oxidation in the absence of any catalyst, while approximately 91% ammonia removal was achieved by wet oxidation over the Cu/La/Ce catalyst at 230 degrees C with oxygen partial pressure of 2.0 MPa. Furthermore, the effluent streams were conducted at a liquid hourly space velocity of under 9 h(-1) in the wet catalytic processes, and a reaction pathway was found linking the oxidizing ammonia to nitric oxide, nitrogen and water. The solution contained by-products, including nitrates and nitrites. Nitrite selectivity was minimized and ammonia removal maximized when the feed ammonia solution had a pH of around 12.0.     

Degradation of azo dye Procion Red MX-5B by photocatalytic oxidation

The photocatalytic oxidation (PCO) of a monoazo dye Procion Red MX-5B under various physico-chemical conditions was investigated. Degradation of the dye by PCO was enhanced by augmentation in UV intensity, titanium dioxide and hydrogen peroxide concentrations but was inhibited by increase in initial dye concentration. The PCO process was affected by pH in a peculiar way. In the presence of 100 mg/l of TiO2 and the absence of H2O2, the highest reaction rate was observed when the initial pH was 10. With 500 mg/l of TiO2 and 10 mM of H2O2, the reaction was the fastest at initial pH of 3-5. The optimal conditions for the degradation of the dye, at an UV intensity of 17 mW/cm2, were determined to be: TiO2 concentration, 500 mg/l; initial H2O2 concentration, 10 mM; initial pH, 5.0. Monitoring of TOC loss showed that the dye was mineralized by 90% within 80 min under these conditions. Nevertheless, the persistence of a low level of TOC indicated that mineralization was not complete and dead-end product(s) which was (were) resistant to PCO might have accumulated.     

Burial,exportation and degradation of acyclic petroleum hydrocarbons following a simulated oil spill in bioturbated Mediterranean coastal sediments

A field study was conducted in a French Mediterranean littoral (Gulf of Fos) in order to determine the role of bioturbation processes during the bioremediation of oil-contaminated sediments. Inert particulate tracers (luminophores) and Arabian light crude oil were deposited at the surface of sediment cores incubated in situ for 2, 6 and 12 months. After incubation, luminophores and hydrocarbons presented roughly similar depth distributions in the sediment, showing a continuous burial of material until 55 mm depth. Short-chain (< or = n-C25) n-alkanes were totally removed from the sedimentary column after 6 months, whereas approximately 20% of heavier n-alkanes (e.g. n-C30) and of isoprenoid hydrocarbons (pristane (Pr) and phytane (Ph)) remained at the end of the experiment. The determination of the degradation constant and the turn-over rate of individual hydrocarbon indicated that C17-25 n-alkanes were degraded two to three times faster than longer homologues and than pristane and phytane. Using the 17alpha,21beta-C30-hopane as an internal inert reference, we could demonstrate that, after 12 months of in situ incubation, 55% of the losses of the n-alkanes < or = C25 and 35% of the losses of the heavier n-alkanes and of Pr and Ph were due to biodegradation processes. These results demonstrate that the activity of benthic organisms can have a significant influence on the qualitative and quantitative fate of acyclic hydrocarbons following a petroleum contamination in marine coastal sediments.     

Environmental toxicity assessment in the Paraná river delta (Argentina): simultaneous evaluation of selected pollutants and mortality rates of Corbicula fluminea (Bivalvia) early juveniles

Water and sediment samples were collected in the lower Paraná delta at four sites with different levels of exposure to pollution to evaluate the anthropogenic impact through chemical analyses and mortality bioassays. Individual polychlorinated biphenyls, chlorinated pesticides, aliphatic hydrocarbons, polycyclic aromatic hydrocarbons, and heavy metals were measured in waters, porewaters and sediments. The same three phases were also subjected to toxicity assays with straight-hinged juveniles of Corbicula fluminea. Concentrations of several pollutants were above levels recommended for the protection of aquatic life: in waters, Zn, Cu and Cr were 1.6-4.9 times higher, whereas in the sediments Cr was 1.8-3.6, and benzo(a)pyrene was 2.8-5.6 times higher. Pollutant concentrations followed a clear geographic pattern with highest values in the densely populated area of the Reconquista and Luján rivers, lower levels in the San Antonio, and lowest loadings in the remote Paraná de las Palmas. This gradient was adequately matched by the pattern of mortality rates of C. fluminea early juveniles, which were highest in the Reconquista-Luján (40-93%) and lowest (and not significantly different from the control) in the Paraná (3.3-23%). Mortality rates also increased from surface waters (3.3-53%), to porewaters (12-73%), to sediments (23-93%). Although toxicity was probably mainly due to dissolved contaminants, agreement between chemical and biological evidence of pollution was best for the sediment compartment, whereas porewater and surface water showed a higher degree of variability.     

Correlations between cadmium and mineral nutrients in absorption and accumulation in various genotypes of rice under cadmium stress

The absorption and accumulation of Cd2+, Fe3+, Zn2+, Mn2+, Cu2+ and Mg2+ in the roots and leaves of 20 rice cultivars (Oryza sativa L.) with different genotypes under cadmium (Cd) stress were investigated with pot experiments. The results showed that there existed significant differences among the rice cultivars in the contents of six mineral elements in both roots and leaves at both heading and ripening periods. The statistical analysis showed that, for their contents in roots, significant and positive correlations between Cd2+ and Fe3+, Cd2+ and Zn2+, Cd2+ and Mn2+, Cd2+ and Cu2+ existed, but no significant correlation between Cd2+ and Mg2+, at the two periods. In the leaves, Cd also showed significant and positive correlations with Fe3+, Zn2+ and Cu2+ at the both periods, but a significant and negative correlation with Mn2+ and no significant correlation with Mg2+ at heading, a significant and positive correlation with Mg2+ and no significant correlation with Mn2+ at ripening. These results suggested that there were cooperative absorption between Cd2+ and Fe3+, Mn2+, Cu2+, Mn2+ in rice plants. Genotypic differences in Cd uptake and translocation among the rice cultivars suggested that paddy field of some rice cultivars may be irrigated with partially treated sewage water.     

Reductive degradation of nitrobenzene in aqueous solution by zero-valent iron

The reductive degradation of nitrobenzene (NB) by zero-valent iron was investigated. Experimental results showed that the degradation of NB was influenced by pH and NB concentration. The optimum pH value was found to be 3.0 for the reductive degradation of NB in the tested pH ranges of 3.0-12.0. The formation rate of aniline, a major reductive product of NB, followed zero-order kinetics at various pH levels. Furthermore, GC/MS analysis showed that aniline, azobenzene and azoxybenzene were the reductive products of NB by zero-valent iron. With the analysis of the products with GC/MS and FTIR, possible reductive pathways of NB by zero-valent iron were suggested.     

Enhancement of copper and cadmium adsorption on kaolin by the presence of humic acids

The competitive adsorption equilibrium isotherms of Cu²⁺ and Cd²⁺ on kaolin have been measured at 298 K, in the presence and the absence of humic acids (HAs). HAs were found to enhance the metal adsorption capacity of mineral surfaces, in particular kaolin. This enhancement was also observed in the competitive adsorption of copper and cadmium on kaolin and kaolin–HA complex. This competitive adsorption shows that the presence of Cd²⁺ has not an important effect on Cu²⁺ adsorption, whereas a dramatic decrease is observed on the adsorption of Cd²⁺ in the presence of Cu²⁺. The Freundlich isotherm equation was found to provide an excellent fit to the experimental data. These results were compared with the independent adsorption of both heavy metals.     

Dissolution rates of three high explosive compounds: TNT,RDX, and HMX

Incidental exposure to high explosive compounds can cause subtle health effects to which a population could be more susceptible than injury by detonation. Proper source characterization is a key requirement in the conduct of risk assessments. For nonvolatile solid explosives, dissolution is one of the primary mechanisms that controls fate and transport, resulting in exposure to these compounds remote from their source. To date, information describing dissolution rates of high explosives has been sparse. The objective of this study was to determine the dissolution rates of three high explosive compounds, 2,4,6-trinitrotoluene (TNT), hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX), and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX), in dilute aqueous solutions as a function of temperature, surface area, and energy input. To determine each variable's impact on dissolution rate, experiments were performed where one variable was changed while the other two were held constant. TNT demonstrated the fastest dissolution rate followed by HMX and then RDX. Dissolution rate correlation equations were developed for each explosive compound incorporating the three aforementioned variables, independently, and collectively in one correlation equation.     

Heavy metal content and speciation in groundwater of the Guadiamar river basin

This work presents the conclusions of a speciation study concerning Zn, Cd, Pb and Cu in groundwater from ten wells in the alluvial aquifers of the Guadiamar river, affected by Aznalcollar mine tailing spill (April 1998). The sampling campaign took place in January 2000, almost two years after the mining accident. Four metal fractions were determined: labile metal forms, H+ exchangeable metal forms, strongly inert forms (associated with organic and inorganic matter in solution), and forms associated with suspended matter. Total metal concentration in groundwater followed the trend Cd < Pb < Cu < Zn. The speciation study showed that Zn and Cd were present to a great extent in available forms (labile and H+ exchangeable), while Pb and Cu were found mostly in the less available forms (strongly inert). These results can illustrate the potential value of the speciation tool for the follow-up of spill-induced pollution in the area.     

The 1999 Fresno particulate matter exposure studies: comparison of community, outdoor, and residential PM mass measurements

Two collaborative studies have been conducted by the U.S. Environmental Protection Agency (EPA) National Exposure Research Laboratory (NERL) and National Health and Environmental Effects Research Laboratory to determine personal exposures and physiological responses to particulate matter (PM) of elderly persons living in a retirement facility in Fresno, CA. Measurements of PM and other criteria air pollutants were made inside selected individual residences within the retirement facility and at a central outdoor site on the premises. In addition, personal PM exposure monitoring was conducted for a subset of the participants, and ambient PM monitoring data were available for comparison from the NERL PM research monitoring platform in central Fresno. Both a winter (February 1-28, 1999) and a spring (April 19-May 16, 1999) study were completed so that seasonal effects could be evaluated. During the spring study, a more robust personal exposure component was added, as well as a more detailed evaluation of physical factors, such as air-exchange rate, that are known to influence the penetration of particles into the indoor environment. In this paper, comparisons are made among measured personal PM exposures and PM mass concentrations measured at the NERL Fresno Platform site, outside on the premises of the retirement facility, and inside selected residential apartments at the facility during the two 28-day study periods. The arithmetic daily mean personal PM2.5 exposure during the winter study period was 13.3 micrograms/m3, compared with 9.7, 20.5, and 21.7 micrograms/m3 for daily mean overall apartment, outdoor, and ambient (i.e., platform) concentrations, respectively. The daily mean personal PM2.5 exposure during the spring study period was 11.1 micrograms/m3, compared with 8.0, 10.1, and 8.6 micrograms/m3 for the daily mean apartment, outdoor, and ambient concentrations, respectively.