Microbial nitrogen transformation potential in surface run-off leachate from a tropical landfill

Ammonium is one of the major toxic compounds and a critical long-term pollutant in landfill leachate. Leachate from the Jatibarang landfill in Semarang, Indonesia, contains ammonium in concentrations ranging from 376 to 929 mg N L⁻¹. The objective of this study was to determine seasonal variation in the potential for organic nitrogen ammonification, aerobic nitrification, anaerobic nitrate reduction and anaerobic ammonium oxidation (anammox) at this landfilling site. Seasonal samples from leachate collection treatment ponds were used as an inoculum to feed synthetic media to determine potential rates of nitrogen transformations. Aerobic ammonium oxidation potential (<0.06 mg N L⁻¹ h⁻¹) was more than a hundred times lower than the anaerobic nitrogen transformation processes and organic nitrogen ammonification, which were of the same order of magnitude. Anaerobic nitrate oxidation did not proceed beyond nitrite; isolates grown with nitrate as electron acceptor did not degrade nitrite further. Effects of season were only observed for aerobic nitrification and anammox, and were relatively minor: rates were up to three times higher in the dry season. To completely remove the excess ammonium from the leachate, we propose a two-stage treatment system to be implemented. Aeration in the first leachate pond would strongly contribute to aerobic ammonium oxidation to nitrate by providing the currently missing oxygen in the anaerobic leachate and allowing for the growth of ammonium oxidisers. In the second pond the remaining ammonium and produced nitrate can be converted by a combination of nitrate reduction to nitrite and anammox. Such optimization of microbial nitrogen transformations can contribute to alleviating the ammonium discharge to surface water draining the landfill.     

Bio-processing of solid wastes and secondary resources for metal extraction - A review

Metal containing wastes/byproducts of various industries, used consumer goods, and municipal waste are potential pollutants, if not treated properly. They may also be important secondary resources if processed in eco-friendly manner for secured supply of contained metals/materials. Bio-extraction of metals from such resources with microbes such as bacteria, fungi and archaea is being increasingly explored to meet the twin objectives of resource recycling and pollution mitigation. This review focuses on the bio-processing of solid wastes/byproducts of metallurgical and manufacturing industries, chemical/petrochemical plants, electroplating and tanning units, besides sewage sludge and fly ash of municipal incinerators, electronic wastes (e-wastes/PCBs), used batteries, etc. An assessment has been made to quantify the wastes generated and its compositions, microbes used, metal leaching efficiency etc. Processing of certain effluents and wastewaters comprising of metals is also included in brief. Future directions of research are highlighted.     

Evaluation of the biomethane potential of solid fish waste

Manufacturing processes in fish canning industries generate a considerable amount of solid waste that can be digested anaerobically. The aim of this research was to study the biochemical methane potential of different solid fish waste. For tuna, sardine and needle fish waste, around 0.47g COD-CH(4)/g COD(added) was obtained in batch experiments with 1%TS; whereas for mackerel waste, the methane production attained 0.59g COD-CH(4)/g COD(added). The increase in the waste/inoculum ratio, from 1.1-1.3 to 2.8-3.3g VS(waste)/g VS(inoculum), led to overload due to VFA and LCFA accumulation. Afterward, co-digestion assays of fish waste with gorse were undertaken but the biochemical methane potential did not improve.     

Are functional traits good predictors of demographic rates? Evidence from five neotropical forests

A central goal of comparative plant ecology is to understand how functional traits vary among species and to what extent this variation has adaptive value. Here we evaluate relationships between four functional traits (seed volume, specific leaf area, wood density, and adult stature) and two demographic attributes (diameter growth and tree mortality) for large trees of 240 tree species from five Neotropical forests. We evaluate how these key functional traits are related to survival and growth and whether similar relationships between traits and demography hold across different tropical forests. There was a tendency for a trade-off between growth and survival across rain forest tree species. Wood density, seed volume, and adult stature were significant predictors of growth and/or mortality. Both growth and mortality rates declined with an increase in wood density. This is consistent with greater construction costs and greater resistance to stem damage for denser wood. Growth and mortality rates also declined as seed volume increased. This is consistent with an adaptive syndrome in which species tolerant of low resource availability (in this case shade-tolerant species) have large seeds to establish successfully and low inherent growth and mortality rates. Growth increased and mortality decreased with an increase in adult stature, because taller species have a greater access to light and longer life spans. Specific leaf area was, surprisingly, only modestly informative for the performance of large trees and had ambiguous relationships with growth and survival. Single traits accounted for 9-55% of the interspecific variation in growth and mortality rates at individual sites. Significant correlations with demographic rates tended to be similar across forests and for phylogenetically independent contrasts as well as for cross-species analyses that treated each species as an independent observation. In combination, the morphological traits explained 41% of the variation in growth rate and 54% of the variation in mortality rate, with wood density being the best predictor of growth and mortality. Relationships between functional traits and demographic rates were statistically similar across a wide range of Neotropical forests. The consistency of these results strongly suggests that tropical rain forest species face similar trade-offs in different sites and converge on similar sets of solutions.     

Reproduction and growth of the freshwater prawn, Palaemon paucidens (Decapoda: Palaemonidae) in a lake of Korea

This study analyzed the reproduction and growth of freshwater prawn, Palaemon paucidens De Haan 1844 from Suk-dang lake(Korea). The analysis of the sex ratio showed a higher proportion of males than that of females. The average size of the eggs was 6.12 (+/-0.55) mm3 in the non-eyed stage (stageA) and 7.20 (+/-0.86)mm3 in the eyed stage (stage B). The reproductive output (RO) calculated with the dried-body weight of an incubating female and the weight of the eggs in dried condition was 26.97% (n = 17) of the average females weight. Incubating prawn appeared in April, and the gonadosomatic indices(GSI) showed the highest value during three months from January to March. Based on the month when there was a high proportion of incubating females with a high GSI, the estimated spawning season of P. paucidens was April. The maturity of the female was evaluated by the development of the ovaries and the existence of eggs. The average body length when 50% of the females in the group reached maturity was 8.55 (+/-2.74) mm. The analysis of the length-frequency distribution showed that the life span of P. paucidens ranged from 12 to 13 months. Females mature faster than males.     

Temporal and spatial variation of episodic wind erosion in unburned and burned semiarid shrubland

Redistribution of soil, nutrients, and contaminants is often driven by wind erosion in semiarid shrublands. Wind erosion depends on wind velocity (particularly during episodic, high-velocity winds) and on vegetation, which is generally sparse and spatially heterogeneous in semiarid ecosystems. Further, the vegetation cover can be rapidly and greatly altered due to disturbances, particularly fire. Few studies, however, have evaluated key temporal and spatial components of wind erosion with respect to (i) erosion rates on the scale of weeks as a function of episodic high-velocity winds, (ii) rates at unburned and burned sites, and (iii) within-site spatial heterogeneity in erosion. Measuring wind erosion in unburned and recently burned Chihuahuan desert shrubland, we found (i) weekly wind erosion was related more to daily peak wind velocities than to daily average velocities as consistent with our findings of a threshold wind velocity at approximately 7 m s(-1); (ii) greater erodibility in burned vs. unburned shrubland as indicated by erosion thresholds, aerodynamic roughness, and nearground soil movement; and (iii) burned shrubland lost soil from intercanopy and especially canopy patches in contrast to unburned shrubland, where soil accumulated in canopy patches. Our results are among the first to quantify post-fire wind erosion and highlight the importance of accounting for finer temporal and spatial variation in shrubland wind erosion. This finer-scale variation relates to semiarid land degradation, and is particularly relevant for predictions of contaminant resuspension and redistribution, both of which historically ignore finer-scale temporal and spatial variation in wind erosion.     

Export of manure phosphorus and nitrogen in turfgrass sod

Regulatory mandates have increased demand for best management practices (BMPs) that will reduce nutrient loading on watersheds impaired by excess manure P and N. Export of manure P and N in turfgrass sod harvests is one BMP under consideration. This study quantified amounts and percentages of P and N removed in a sod harvest for different rates of manure and inorganic P and N. Six treatments comprised an unfertilized control, two manure rates with and without supplemental inorganic N, and inorganic P and N only. The treatments were applied to 'Tifway' bermudagrass (Cynodon dactylon L. x C. transvaalensis Burtt-Davey), '609' buffalograss [Buchloe dactyloides (Nutt.) Engelm.], and 'Reveille' bluegrass (Poa arachnifera Torr. x P. pratensis L.) under field conditions. Comparisons among treatments revealed small variations of P and N content in clippings and the plant component of sod, but large variations in the soil component of sod for each turf species. In addition, 2 to 10 times more P and 1.3 to 5 times more N was removed in soil than in plant components of sod for the two manure rates with and without added inorganic N. Percentages of applied P and N in harvested sod were similar for the two manure rates with and without added N for each species, but differed among turf species for each P (46 to 77%) and N (36 to 47%). The large amounts and percentages of manure P and N removed by sod harvest support the feasibility of this BMP in efforts to reduce nutrient loads on watersheds.     

The use of inert carriers in regulatory biodegradation tests of low density poorly water-soluble substances

Many poorly water-soluble compounds fail regulatory ready biodegradation tests as the method of test material preparation limits the bioavailability of the chemical. The recognised method for delivery of poorly soluble materials into biodegradability tests consists of coating test material inside the test vessel or onto inert substrates (i.e., glass cover slide, boiling beads, filter paper, or Teflon stir bar) that are placed inside the vessels. Volatile solvents are often used to augment this process. Although these substrates work fairly well for delivering many poorly soluble materials into biodegradability tests, they have not been effective in keeping low density, poorly water-soluble substances in the test medium. Soon after medium is added to the test vessels, these chemicals break loose from the substrates and float on the surface where they have limited contact with micro-organisms in the test medium. Hence, there is a reduced potential for measuring substantial biodegradability in the test. This paper describes the work undertaken to establish a standard method of adding low density, poorly water-soluble substances into test vessels of biodegradability studies to ensure these materials remain in contact with micro-organisms in the test medium. The substances are prepared for testing by adsorption onto silica gel followed by dispersion into the culture medium. This method of delivery may provide greater intra- and inter-laboratory consistency in biodegradability test results for low density, poorly water-soluble substances and it may more closely mimic the probable transport and fate of these substances in the environment.     

Basic principles and ecological consequences of changing water regimes on nitrogen cycling in fluvial systems

Understanding the environmental consequences of changing water regimes is a daunting challenge for both resource managers and ecologists. Balancing human demands for fresh water with the needs of the environment for water in appropriate amounts and at the appropriate times are shaping the ways by which this natural resource will be used in the future. Based on past decisions that have rendered many freshwater resources unsuitable for use, we argue that river systems have a fundamental need for appropriate amounts and timing of water to maintain their biophysical integrity. Biophysical integrity is fundamental for the formulation of future sustainable management strategies. This article addresses three basic ecological principles driving the biogeochemical cycle of nitrogen in river systems. These are (1) how the mode of nitrogen delivery affects river ecosystem functioning, (2) how increasing contact between water and soil or sediment increases nitrogen retention and processing, and (3) the role of floods and droughts as important natural events that strongly influence pathways of nitrogen cycling in fluvial systems. New challenges related to the cumulative impact of water regime change, the scale of appraisal of these impacts, and the determination of the impacts due to natural and human changes are discussed. It is suggested that cost of long-term and long-distance cumulative impacts of hydrological changes should be evaluated against short-term economic benefits to determine the real environmental costs.     

Identification of sources contributing to Mid-Atlantic regional aerosol

Source types or source regions contributing to the concentration of atmospheric fine particles measured at Brigantine National Wildlife Refuge, NJ, were identified using a factor analysis model called Positive Matrix Factorization (PMF). Cluster analysis of backward air trajectories on days of high- and low-factor concentrations was used to link factors to potential source regions. Brigantine is a Class I visibility area with few local sources in the center of the eastern urban corridor and is therefore a good location to study Mid-Atlantic regional aerosol. Sulfate (expressed as ammonium sulfate) was the most abundant species, accounting for 49% of annual average fine mass. Organic compounds (22%; expressed as 1.4 x organic carbon) and ammonium nitrate (10%) were the next abundant species. Some evidence herein suggests that secondary organic aerosol formation is an important contributor to summertime regional aerosol. Nine factors were identified that contributed to PM2.5 mass concentrations: coal combustion factors (66%, summer and winter), sea salt factors (9%, fresh and aged), motor vehicle/mixed combustion (8%), diesel/Zn-Pb (6%), incinerator/industrial (5%), oil combustion (4%), and soil (2%). The aged sea salt concentrations were highest in springtime, when the land breeze-sea breeze cycle is strongest. Comparison of backward air trajectories of high- and low-concentration days suggests that Brigantine is surrounded by sources of oil combustion, motor vehicle/mixed combustion, and waste incinerator/industrial emissions that together account for 17% of PM2.5 mass. The diesel/Zn-Pb factor was associated with sources north and west of Brigantine. Coal combustion factors were associated with coal-fired power plants west and southwest of the site. Particulate carbon was associated not only with oil combustion, motor vehicle/mixed combustion, waste incinerator/industrial, and diesel/Pb-Zn, but also with the coal combustion factors, perhaps through common transport.