Self-Reported Seat Belt Use in Four Countries: A Telephone Survey

A telephone survey was conducted in four countries in November 1998 to compare drivers in the United States with those in Australia, Canada, and the United Kingdom regarding their attitudes toward seat belts and belt use laws. More than 90 percent of the 2251 respondents said they thought seat belts are effective, but self-reported belt use was significantly lower in the United States than in the other countries. Respondents in Australia and the United Kingdom had similar views about what they thought were important reasons for using seat belts and had the highest self-reported use. Reasons given for using belts by Canadian and US respondents were quite similar to one another, yet US respondents had significantly lower self-reported use rates, a difference thought to be due to vigorous enforcement of the law in Canada. US drivers were less likely than Australian and UK drivers to say they used belts out of habit, to avoid a ticket, or because it is required by law and more likely to say they used belts for situational reasons. US drivers were least likely to be in favor of belt use laws. Canadian drivers reported the most experience being checked by police for belt use and were most likely to think that nonusers would be caught. US drivers in primary enforcement jurisdictions were more likely than those in secondary jurisdictions to think that drivers not using belts would be caught and more likely to say they always used belts. Results of this survey indicate that seat belt use in the United States could be increased by adoption of primary enforcement laws and highly visible enforcement programs of the type used in Canada, and that seat belt use could be increased in all countries by increasing the penalties for nonuse.     

Design and Construction of a Simple,Continuous Flow Sulfur Dioxide Exposure Chamber

ABSTRACT

The use of street sweepers to clean paved roads, particularly after high-wind events, has been proposed as a PM₁₀ control method. Using an artificial tunnel, the emission rates for several street sweepers were quantified under actual operating conditions. The tunnel was a tent enclosure, 6.1 × 4.3 × 73 m, open on both ends. PM₁₀ concentrations were measured at the inlet and outlet while a sweeper removed sand deposited along the length. Measurements were made using a specialized low-volume filter sampler and an integrating nephelometer. The volume of air passing through the tunnel was measured by releasing an inert tracer, sulfur hexafluoride, at the inlet and measuring its concentration at the outlet. A large difference in emission rates between vacuum-type sweepers was observed, with rates varying from 5 to 100 mg m^-1 swept. For the cleanest sweepers, the background rates (collected by sweeping clean pavement) were about half of the total PM₁₀ emission rate. These background emission rates likely were from diesel exhaust; background rates for the single gasoline-powered sweeper were below detection. Particle light scattering data confirmed the filter collection results. The artificial tunnel approach would be useful in measuring total emissions from other mobile and stationary sources.     

The Effects of Learner's Permit Requirements in Tennessee

Sixteen and 17 year-olds were surveyed at motor-vehicle offices in Tennessee after qualifying for their first driver's license. When the survey was conducted during October and November 1995, neither a learner's permit nor completion of a driver education course was required to obtain a license at age 16 or 17. The survey was repeated during December and January 1996–97, approximately one year after a requirement to hold a learner's permit for 90 days or complete a driver education course was implemented. Results from the 1991 drivers (ages 16 and 17) surveyed indicated Tennessee's licensing law change was associated with approximately 100 additional miles and 8 additional hours of practice driving prior to licensure for the typical 16 or 17 year-old, most often while supervised by a parent or guardian. Results are discussed in relation to the prelicense practice driving requirements of graduated licensing systems.     

More than something to hold the plants up: soil as a non-human ally in the struggle for food justice

Healthy, fertile soil is the material of life itself. It is chemically, biologically and physically structured to support the growth of healthy, environmentally sustainable foods. Recent years have seen a resurgent focus on soil science in Australia. Yet, the influence of soil in the politics of food systems has received comparatively little attention, despite long awareness in farming communities of how the natural world shapes farmers’ choices and possible actions. Drawing on work with SoilCare, a Landcare group with a focus on soil processes in the Northern Rivers of New South Wales, this paper explores the usefulness of approaching soil as an actor in food systems. Taking a participatory approach, and drawing on recent work on new materialisms, we argue that soil can be understood as an important ally in the struggle to shape a just and sustainable food system. While this work is intended to test this idea through a modest local case study, it may point to important new avenues for investigation in food politics.     

Measurement of particle concentrations in a dental office

Particles in a dental office can be generated by a number of instruments, such as air-turbine handpieces, low-speed handpieces, ultrasonic scalers, bicarbonate polishers, polishing cups, as well as drilling and air sprays inside the oral cavity. This study examined the generation of particles during dental drilling and measured particle size, mass, and trace elements. The air sampling techniques included both continuous and integrated methods. The following particle continuous measurements were taken every minute: (1) size-selective particle number concentration (Climet); (2) total particle number concentration (PTRAK), and; (3) particle mass concentration (DustTrak). Integrated particle samples were collected for about 5 h on each of five sampling days, using a PM_2.5 sampler (ChemComb) for elemental/organic carbon analysis, and a PM₁₀ sampler (Harvard Impactor) for mass and elemental analyses. There was strong evidence that these procedures result in particle concentrations above background. The dental procedures produced number concentrations of relatively small particles (<0.5 μm) that were much higher than concentrations produced for the relatively larger particles (>0.5 μm). Also, these dental procedures caused significant elevation above background of certain trace elements (measured by X-ray fluorescence) but did not cause any elevation of elemental carbon (measured by thermal optical reflectance). Dental drilling procedures aerosolize saliva and products of drilling, producing particles small enough to penetrate deep into the lungs. The potential health impacts of the exposure of dental personnel to such particles need to be evaluated. Increased ventilation and personal breathing protection could be used to minimize harmful effects.     

Manure sampling for nutrient analysis: variability and sampling efficacy

Reliable estimation of nutrient concentrations is required to manage animal manure for protecting waters while sustaining crop production. This study was conducted to investigate sample variability and reliable nutrient analysis for several manure types and handling systems. Serial samples were collected from dairy, swine, and broiler poultry operations while manure was being loaded onto hauler tanks or spreaders for field application. Samples were analyzed for total solids (TS), total nitrogen (N), ammoniacal nitrogen (NH4-N), total phosphorus (P), and potassium (K). The least number of samples needed for reliable testing of total N and P, defined as +/- 10% of the experimental means with 99% probability, was obtained for each farm using a computer-intensive random resampling technique. Sample variability within farms, expressed as the coefficient of variation (CV), was mostly 6 to 8% for farms that used agitation of manure storages but several times higher (20-30%) on farms where no agitation was applied during the sampling period. Results from the random resampling procedure indicated that for farms that used agitation, three to five samples were adequate for a representative composite for reliable testing of total N and P; whereas for farms without agitation, at least 40 samples would be required. Data also suggest that using book values for manure nutrient estimations could be problematic because the discrepancies between book standards and measured farm data varied widely from a small amount to several fold.     

HISTORICAL AND ESTIMATED GROUND WATER LEVELS NEAR WINNIPEG,CANADA, AND THEIR SENSITIVITY TO CLIMATIC VARIABILITY1

ABSTRACT: Long term well hydrographs and estimated ground water levels derived from hydroclimatic and biological data were used to evaluate trends within the Upper Carbonate Aquifer (UCA) near Winnipeg, Canada, during the 20th Century. Ground water records from instruments have been kept since the early 1960s and are derived from piezometers in the overlying sediments and in open boreholes in the UCA. Some boreholes extend into an underlying Paleozoic carbonate sequence. Shallow well hydrographs show no obvious long term trends but do exhibit variations on the order of three to four years that are correlated with changes in annual temperature and precipitation at lags up to 24 months. Trends observed in deeper wells appear to be largely related to ground water usage patterns and show little correlation with climate over the past 35 years. Stepwise multiple regression modeled average annual hydraulic head in the shallow wells as a function of regional temperature, precipitation, and tree ring variables. Estimated hydraulic heads had a slightly greater range prior to the 1960s, most prominently during an interval of lowered ground water levels between 1930 and 1942. Regression results demonstrate that moisture sensitive tree ring data are viable predictors of past ground water levels and may be useful for studies of aquifers in regions that lack long, high quality precipitation records.     

MODELING WATER UTILIZATION IN LARGE-SCALE IRRIGATION SYSTEMS: A QUALITATiVE RESPONSE APPROACH1

ABSTRACT: Given limited available data and the present state of knowledge on the social aspects of irrigation, there is a need to develop new quantitative methods to measure water management performance in large-scale systems. A qualitative response framework is adapted to formulate a dynamic logit model of weekly field water adequacy and quantify indirectly farmer water utilization. Model parameters are estimated in a weighted least-squares regression using four seasons of data from a Philippine canal system. Estimated coefficients and independent model forecasts indicate greater effective use of rainfall than irrigation in sustaining high levels of water adequacy during the rainy season. Irrigation utilization is two times higher in the dry season, while system location has a much smaller but still significant impact. Utilization rates for both rain and irrigation showed considerable responsiveness to the prevailing scarcity of water. The qualitative response approach is well suited to the aggregated data available for large-scale systems, and allows advances in modeling dynamic water management behavior. Formal evaluation of the model will require further empirical applications.