Estimates of health benefits due to reductions in ambient NO2 levels

A method is presented here by which the actual numbers of individuals in the U.S. population who would be expected to suffer respiratory illness as a result of exposure to ambient nitrogen dioxide (NO₂) concentrations in excess of the Federally-designated ambient air quality standard can be estimated. At the same time we have attempted to quantify how these adverse health effects would be alleviated by various degrees of reductions in current ambient concentrations. In addition, the health benefit expected to be derived by various NO_x emission control strategies will be examined utilizing the health benefit estimation method presented.It is estimated that there were approximately 33.2×10⁶ excess cases of respiratory illnesses in the U.S. in 1973 associated with ambient NO₂ concentrations in excess of the national ambient standard. A reduction of approximately 50 to 60 percent below 1973 NO₂ levels is needed to essentially eliminate excess respiratory illness associated with ambient NO₂ concentration.     

SATELLITE MICROWAVE OBSERVATIONS OF SOIL MOISTURE VARIATIONS1

ABSTRACT: Results from studies in the Illinois-Indiana and Texas-Oklahoma areas indicate that satellite microwave observations at the 1.55 cm wavelength are responsive to relative moisture variations in the near surface layer of the soil. Because significant vegetation cover absorbs the 1.55 cm microwave emission from the soil, the target area must be predominately bare soil or low density vegetation cover for meaningful measurements to result. The 25 km resolution of the satellite sensor limits application of the microwave techniques to large areas such as watersheds or agricultural districts rather than individual fields. In general, at 1.55 cm. there is an inverse relationship between microwave brightness temperature and changes in soil moisture levels (as indicated by antecedent rainfall) in agricultural regions before the planting of crops or during the early growing season when vegetation cover is sparse. Even early season observations should be of great value in deciding on the time and type of crop planting and for initial irrigation scheduling when the root zone is still in close proximity to the surface.     

PARTIAL AREA HYDROLOGY AND ITS APPLICATION TO WATER RESOURCES1

ABSTRACT: According to a concept known as partial area hydrology, watershed areas are separated into hydrologically active and passive subareas. The literature relating to the development of the partial area concept is reviewed briefly and the relationship of partial area hydrology to geology, soils, and micrometeorology is illustrated. The potential application of partial area hydrology is discussed with respect to present hydrologic techniques, future hydrologic models, urban hydrology, water quality, and water management. Suggestions for identifying and delineating the contributing areas are discussed.     

FLOOD HAZARD STUDIES IN THE MISSISSIPPI RIVER BASIN USING REMOTE SENSING1

ABSTRACT. The Spring 1973 Mississippi River flood was investigated using remotely sensed data from ERTS-1. Both manual and automatic analyses of the data indicate that ERTS-I is extremely useful as a regional tool for flood management. Quantitative estimates of area flooded were made in St. Charles County, Missouri and Arkansas. Flood hazard mapping was conducted in three study areas along the Mississippi River using pre-flood ERTS-1 imagery enlarged to 1:250,000 and 1:100,000 scale. The flood prone areas delineated on these maps correspond to areas that would be inundated by significant flooding (approximately the 100 year flood). The flood prone area boundaries were generally in agreement with flood hazard maps produced by the U. S. Army Corps of Engineers and U. S. Geological Survey although the latter are somewhat more detailed because of their larger scale. Initial results indicate that ERTS-1 digital mapping of flood prone areas can be performed at 1:62,500 which is comparable to some conventional flood hazard map scales.     

Characterisation of mineralogical forms of barium and trace heavy metal impurities in commercial barytes by EPMA, XRD and ICP-MS

This study was carried out to characterise the mineralogical forms of barium and the trace heavy metal impurities in commercial barytes of different origins using electron probe microanalysis (EPMA), X-ray diffraction (XRD) and inductively coupled plasma mass spectrometry (ICP-MS). Qualitative EPMA results show the presence of typically eight different minerals in commercial barytes including barite (BaSO4), barium feldspar, galena (PbS), pyrite (FeS2), sphalerite (ZnS), quartz (SiO2), and silicates, etc. Quantitative EPMA confirms that the barite crystals in the barytes contain some strontium and a little calcium, whereas trace heavy metals occur in the associated minerals. Analysis of aqua regia extracts of barytes samples by ICP-MS has shown the presence of a large number of elements in the associated minerals. Arsenic, copper and zinc concentrations correlate closely in all 10 samples. The findings suggest that barytes is not, as traditionally thought, an inert mineral, but is a potentially toxic substance due to its associated heavy metal impurities, which can be determined by an aqua regia digest without the need for complete dissolution of the barite itself. X-ray powder diffraction was not informative as the complex barite pattern masks the very weak lines from the small amounts of associated minerals.     

Net Present Biodiversity Value and the Design of Biodiversity Offsets

There is an urgent need to develop sound theory and practice for biodiversity offsets to provide a better basis for offset multipliers, to improve accounting for time delays in offset repayments, and to develop a common framework for evaluating in-kind and out-of-kind offsets. Here, we apply concepts and measures from systematic conservation planning and financial accounting to provide a basis for determining equity across type (of biodiversity), space, and time. We introduce net present biodiversity value (NPBV) as a theoretical and practical measure for defining the offset required to achieve no-net-loss. For evaluating equity in type and space we use measures of biodiversity value from systematic conservation planning. Time discount rates are used to address risk of non-repayment, and loss of utility. We illustrate these concepts and measures with two examples of biodiversity impact–offset transactions. Considerable further work is required to understand the characteristics of these approaches.     

Technical Aspects of Lime/Limestone Scrubbers for Coal-Fired Power Plants

This 2-part article deals with the technical aspects of lime/limestone scrubbers for coal-fired power plants. Part I covers process chemistry and scrubber systems. Part II (next month) will cover instrumentation, particulate removal, and sludge disposal.     

The stable isotope signature of methane emitted from plant material under UV irradiation

Recent experiments have shown that dry and fresh leaves, other plant matter, as well as several structural plant components, emit methane upon irradiation with UV light. Here we present the source isotope signatures of the methane emitted from a range of dry natural plant leaves and structural compounds. UV-induced methane from organic matter is strongly depleted in both ¹³C and D compared to the bulk biomass. The isotopic content of plant methoxyl groups, which have been identified as important precursors of aerobic methane formation in plants, falls roughly halfway between the bulk and CH₄ isotopic composition. C3 and C4/CAM plants show the well-established isotope difference in bulk ¹³C content. Our results show that they also emit CH₄ with different δ¹³C value. Furthermore, δ¹³C of methoxyl groups in the plant material, and ester methoxyl groups only, show a similar difference between C3 and C4/CAM plants. The correlation between the δ¹³C of emitted CH₄ and methoxyl groups implies that methoxyl groups are not the only source substrate of CH₄.Interestingly, δD values of the emitted CH₄ are also found to be different for C3 and C4 plants, although there is no significant difference in the bulk material. Bulk δD analyses may be compromised by a large reservoir of exchangeable hydrogen, but no significant δD difference is found either for the methoxyl groups, which do not contain exchangeable hydrogen. The δD difference in CH₄ between C3 and C4 plants indicates that at least two different reservoirs are involved in CH₄ emission. One of them is the OCH₃ group, the other one must be significantly depleted, and contribute more to the emissions of C3 plants compared to C4 plants. In qualitative agreement with this hypothesis, CH₄ emission rates are higher for C3 plants than for C4 plants.