Simulated fate and transport of metolachlor in the unsaturated zone, Maryland, USA

An unsaturated-zone transport model was used to examine the transport and fate of metolachlor applied to an agricultural site in Maryland, USA. The study site was instrumented to collect data on soil-water content, soil-water potential, ground water levels, major ions, pesticides, and nutrients from the unsaturated zone during 2002-2004. The data set was enhanced with site-specific information describing weather, soils, and agricultural practices. The Root Zone Water Quality Model was used to simulate physical, chemical, and biological processes occurring in the unsaturated zone. Model calibration to bromide tracer concentrations indicated flow occurred through the soil matrix. Simulated recharge rates were within the measured range of values. The pesticide transport model was calibrated to the intensive data collection period (2002-2004), and the calibrated model was then used to simulate the period 1984 through 2004 to examine the impact of sustained agricultural management practices on the concentrations of metolachlor and its degradates at the study site. Simulation results indicated that metolachlor degrades rapidly in the root zone but that the degradates are transported to depth in measurable quantities. Simulations indicated that degradate transport is strongly related to the duration of sustained use of metolachlor and the extent of biodegradation.     

Demolish it and They Will Come: Estimating the Economic Impacts of Restoring a Recreational Fishery1

Abstract: This paper presents the results of an ex post survey of recreational anglers for the lower Kennebec River, post‐Edwards Dam removal. To the best of our knowledge, this study represents one of the first ex post analyses of fisheries restoration from dam removal. We find significant benefits have accrued to anglers using the restored fishery. Specifically, anglers are spending more to visit the fishery, a direct indication of the increased value anglers place on the improved fishery. Anglers are also willing to pay for increased angling opportunities on the river. These findings have policy implications for other privately owned dams that are currently undergoing relicensing and/or dam removal considerations. Our findings may also hold implications for fisheries that have deteriorated due to historic dam construction.     

Arthropod populations,yield and damage in monocultures and polycultures of corn,beans and tomatoes

This study involved an examination of a polyculture system (corn-bean-tomato) for specific interactions that may be useful in the development of agronomic systems that are less susceptible to pest attack. The data show that the arthropods generally prefer (are found in) one cultivar more than the others, even in polycultural situations. For example Trichogramma sp. are much more active on tomatoes than on corn, while Coccinellidae are much more common on corn than on tomatoes. The data do not, for the most part, demonstrate any significant differences in insect populations, yield or damage that resulted from interplanting the various cultivars. The role of diversity in agricultural systems is also discussed.     

Photolytic treatment of atrazine-contaminated water: products, kinetics, and reactor design.

This study investigates the products, kinetics, and reactor design of atrazine photolysis under 254-nm ultraviolet-C (UVC) irradiation. With an initial atrazine concentration of 60 microg/L (60 ppbm), only two products remain in detectable levels. Up to 77% of decomposed atrazine becomes hydroxyatrazine, the major product. Both atrazine and hydroxyatrazine photodecompose following the first-order rate equation, but the hydroxyatrazine photodecomposition rate is significantly slower than that of atrazine. For atrazine photodecomposition, the rate constant is proportional to the square of UVC output, but inversely proportional to the reactor volume. For a photochemical reactor design, a series of equations are proposed to calculate the needed UVC output power, water treatment capacity, and atrazine outlet concentration.     

The effects of 3,3′,4,4′-tetrabromobiphenyl on rats fed diets containing a constant level of copper and varying levels of molybdenum

Copper (Cu) metabolism is altered in rats fed diets high in molybdenum (Mo) and low in Cu. This 10-week study was carried out to examine the effects of supplemental Mo (7.5–240 μg/g diet) on male Sprague–Dawley rats fed diets adequate in Cu (5 μg/g diet) and to determine the susceptibility of Mo-treated animals to the environmental pollutant 3,3′,4,4′-tetrabromobiphenyl (TBB). After 7 weeks of dietary treatment, half of the rats in each group received a single IP injection of TBB (150 μM/kg bw), while the other half received the corn oil vehicle. Rats sacrificed at 10 weeks showed no effects of Mo on growth, feed efficiency, or selected organ or tissue weights. Dose-dependent effects on plasma Mo (0–5.1 μg/mL), plasma Cu (0.95–0.20 μg/mL), and bone Cu (3.4–10 μg/g) in control through the high dose were found. Cu sequestration in the bone of Mo-treated rats is a new finding. TBB treatment resulted in dramatic weight loss and loss of absolute organ mass. Relative organ weights were increased, except for the thymus. TBB altered the concentrations of certain amino acids. Compared to control rats, this polybrominated biphenyl congener significantly decreased plasma Cu and ceruloplasmin at higher concentrations of dietary Mo and promoted the process of plasma Cu decrease by Mo, suggesting a combined effect.     

Use of a Continuous Nephelometer to Measure Personal Exposure to Particles During the U.S. Environmental Protection Agency Baltimore and Fresno Panel Studies

ABSTRACT

In population exposure studies, personal exposure to PM is typically measured as a 12- to 24-hr integrated mass concentration. To better understand short-term variation in personal PM exposure, continuous (1-min averaging time) nephelometers were worn by 15 participants as part of two U.S. Environmental Protection Agency (EPA) longitudinal PM exposure studies conducted in Baltimore County, MD, and Fresno, CA. Participants also wore iner-tial impactor samplers (24-hr integrated filter samples) and recorded their daily activities in 15-min intervals. In Baltimore, the nephelometers correlated well (R² = 0.66) with the PM₂₅ impactors. Time-series plots of personal nephelometer data showed each participant's PM exposure to consist of a series of peaks of relatively short duration. Activities corresponding to a significant instrument response included cooking, outdoor activities, transportation, laundry, cleaning, shopping, gardening, moving between microenvironments, and removing/putting on the instrument. On average, 63-66% of the daily PM exposure occurred indoors at home (about 2/3 of which occurred during waking hours), primarily due to the large amount of time spent in that location (an average of 7277%). Although not a reference method for measuring mass concentration, the nephelometer did help identify PM sources and the relative contribution of those sources to an individual's personal exposure.     

Determination of Microgram Quantities of Inorganic Sulfate in Atmospheric Particulates

Abstract

Before a community-wide woodstove changeout program, a chemical mass balance (CMB) source apportionment study was conducted in Libby, MT, during the winter of 2003–2004 to identify the sources of fine particulate matter (PM_2.5) within the valley. Results from this study showed that residential woodstoves were the major source, contributing approximately 80% of the ambient PM_2.5 throughout the winter months. In an effort to lower the ambient PM_2.5, a large woodstove changeout program was conducted in Libby from 2005 to 2007 in which nearly 1200 old woodstoves were changed out with cleaner burning models. During the winter of 2007–2008, a follow-up CMB source apportionment study was conducted to evaluate the effectiveness of the changeout. Results from this study showed that average winter PM_2.5 mass was reduced by 20%, and woodsmoke-related PM_2.5 (as identified by the CMB model) was reduced by 28% when compared with the pre-changeout winter of 2003– 2004. These results suggest that a woodstove changeout can be an effective tool in reducing ambient levels of PM_2.5 in woodstove-impacted communities.     

Assessment of the Commercial Potential for the High Intensity Ionizer in the Electric Utility Industry

The high intensity ionizer (HII) has reached a level of development where projections can be made of its potential for enhancing electrostatic precipitator (ESP) performance within the electric utility industry. Future ESP performance requirements are forecast based on a scenario of possible changes in regulations for mass emissions, fine particulate, and opacity. An assessment is made of the alternative means of upgrading ESP performance over the next 15 years. It is concluded that of 570 ESP estimated to require upgrading by 1995 to meet possibly more stringent regulations, approximately 20%—or 117 units—may employ HII.     

Burning Chemical Wastes as Fuels in Cement Kilns

Hazardous wastes in the environment represent one of our most serious problems. Ever increasing quantities of toxic wastes have contaminated our land, air, and water. Lack of adequate hazardous waste disposal facilities is a critical problem. Landfilling toxic wastes is no longer considered safe. The tragedy of the Love Canal has demonstrated the need for proper hazardous waste disposal facilities. The best organic chemical waste disposal method is process incineration. Cement kilns have been used for burning toxic chemical industrial wastes in Canada, Michigan, New York, Sweden, etc. Existing cement kilns, when properly operated, can destroy most organic chemical wastes. Even the most complex chlorinated hydrocarbons, including PCB can be completely destroyed during normal cement kiln operations, with minimal emissions to the environment. Burning toxic chemical wastes in cement kilns, and other mineral industries, is mutually beneficial to both industry, who generates such wastes, and to society and government, who want to dispose properly of such wastes in a safe, environmentally acceptable manner. The added benefit of energy conservation is important, since large quantities of valuable fuel can be saved in the manufacture of cement when such techniques are employed.