In Situ Measurement of Hydrochloric Acid in Rocket Exhaust Clouds Using a Remotely Piloted Aircraft

Abstract

An instrumentation system employing an RPV (remotely piloted vehicle) platform was developed for temporally and spatially resolved air pollution measurements, and was used to measure the evolution of gas-phase HC1 in exhaust clouds from a solid rocket motor firing and fuel pit burns. A thermistor and a sensitive (ppmv-level), rapid-response (<0.1 sec) infrared absorption sensor for HC1 were mounted in a flow channel in the RPV, permitting concentration and temperature measurements to be made in the cloud on a several-meter scale. The RPV system was flown in a series of field tests at Thiokol Corporation’s Elkton, MD division to evaluate the HC1 content of the exhaust products of a new Mg-based fuel formulation. Measurements were made in the clouds from Al-based and Mg-based solid fuel pit burns and a Mg-fueled motor firing over periods of several minutes. Elevated temperatures and HC1 concentrations were found to be temporally correlated with video images of the particulate cloud. Cl originating from the ammonium perchlorate oxidizer appeared in the exhaust as HC1 in each of the tests. Both the macroscopic and local cloud parameters indicate that the Mg-based fuel may provide some reduction in HC1 concentration compared to the standard Al-based fuel.     

The Kinetics of Formaldehyde Oxidation and Emissions Reduction in Methanol Fueled Vehicles

Oxidation of formaldehyde over supported platinum catalyst produced CO₂ as a major product and CO as a minor product under a wide range of Inlet concentrations and reaction temperatures. The temporal variation of CO yield proceeded through a maximum suggesting that it was produced as an intermediate in the pathway leading to CO₂. CO selectivity (S _co = y _co/x _HCHO) was maximized by operating at oxygen concentration below the stoichiometric point and at high reaction temperatures. A mechanism for formaldehyde oxidation is proposed which involves adsorption of formaldehyde followed by catalytic decomposition to CO and H₂ and oxidation of the surface species; the rate limiting step apparently shifts from the decomposition at high oxygen concentration to the oxidation of surface species at low concentration. The rate expression was obtained from the postulated mechanism and found to be consistent with the experimental results. The maximum for the yield of CO provided a second method by which to confirm the postulated rate expression.     

ESTIMATING EROSION RISKS ASSOCIATED WITH LOGGING AND FOREST ROADS IN NORTHWESTERN CALIFORNIA1

ABSTRACT: Erosion resulting from logging and road building has long been a concern to forest managers and the general public. An objective methodology was developed to estimate erosion risk on forest roads and in harvest areas on private land in northwestern California. It was based on 260 plots sampled from the area harvested under 415 Timber Harvest Plans completed between November 1978 and October 1979. Results confirmed previous findings that most erosion related to forest management occurs on a small fraction of the managed area. Erosion features larger than the minimum size inventories in this study (> 13 yd³) occupied only 0.2 percent of the area investigated. Linear discriminant analysis was used to develop two equations for identifying critical sites (sites with erosion >100 yd³ac^?1). The equations were based on slope, horizontal curvature (an expression of local topography), and soil color (on road sites) or the strength of the underlying rocks (on harvest sites). The equations can be used in planning to estimate the erosion risk of proposed activities. They can also be used to estimate acceptable risk thresholds based on the value of competing resources.     

Molecular profiling--a tool for addressing emerging gaps in the comparative risk assessment of GMOs

Assessing the risks of genetically modified organisms (GMOs) is required by both international agreement and domestic legislation. Many view the use of the "omics" tools for profiling classes of molecules as useful in risk assessment, but no consensus has formed on the need or value of these techniques for assessing the risks of all GMOs. In this and many other cases, experts support case-by-case use of molecular profiling techniques for risk assessment. We review the latest research on the applicability and usefulness of molecular profiling techniques for GMO risk assessment. As more and more kinds of GMOs and traits are developed, broader use of molecular profiling in a risk assessment may be required to supplement the comparative approach to risk assessment. The literature-based discussions on the use of profiling appear to have settled on two findings: 1. profiling techniques are reliable and relevant, at least no less so than other techniques used in risk assessment; and 2. although not required routinely, regulators should be aware of when they are needed. The dismissal of routine molecular profiling may be confusing to regulators who then lack guidance on when molecular profiling might be worthwhile. Molecular profiling is an important way to increase confidence in risk assessments if the profiles are properly designed to address relevant risks and are applied at the correct stage of the assessment.     

Ergonomic evaluation of a new truck seat design: a field study

A postural evaluation of commercial licensed truck drivers was conducted to determine the ergonomic benefits of a truck seat prototype in comparison with an industry standard seat. Twenty commercially licensed truck drivers were recruited to perform a 90-min driving task. Postures were assessed using accelerometers and a backrest and seat pan pressure mapping system. Subjective discomfort measurements were monitored using two questionnaires: ratings of perceived discomfort (RPD) and the automotive seating discomfort questionnaire (ASDQ). Participants reported significantly higher discomfort scores when sitting in the industry standard seat. Participants sat with more lumbar lordosis and assumed a more extended thoracic posture when seated in the prototype. Pairing the gluteal backrest panel with the adjustable seat pan also helped reduce the average sitting pressure on both the seat pan and the backrest. The prototype provided several postural benefits for commercially certified truck drivers, as it did for a young and healthy population.     

Sulfur Dioxide Emission Limitation (Sdel) Program at Tva Power Plants

TVA is conducting a program of intermittent control of SO₂ emissions at nine of its coal-fired power plants.The program is designed to limit SO₂ emissions by reducing generation during adverse atmospheric conditions to avoid exceeding ambient SO₂ standards. Each is identified as a Class I or Class II program—based primarily on its design and operational complexity. The four Class I programs (Paradise, Cumberland, Allen, Gallatin) operate 7 days/week from early morning through mid-afternoon. The five Class II programs (Kingston, Widows Creek, Colbert, Johnsonville, Shawnee) operate 24 hours/day and 7 days/week. Environmental data stations (EDS) are located at each plant site; the staff has the responsibility for the collection and validation of the onsite meteorological data, the SO₂ mobile and fixed monitoring network data, the plant operational data, and the meteorological forecast data from the Meteorological Forecast Center in Muscle Shoals, AL. At the EDS, the data are entered into a computer operating model for scheduling plant generation reductions.     

Measurement of particle concentrations in a dental office

Particles in a dental office can be generated by a number of instruments, such as air-turbine handpieces, low-speed handpieces, ultrasonic scalers, bicarbonate polishers, polishing cups, as well as drilling and air sprays inside the oral cavity. This study examined the generation of particles during dental drilling and measured particle size, mass, and trace elements. The air sampling techniques included both continuous and integrated methods. The following particle continuous measurements were taken every minute: (1) size-selective particle number concentration (Climet); (2) total particle number concentration (PTRAK), and; (3) particle mass concentration (DustTrak). Integrated particle samples were collected for about 5 h on each of five sampling days, using a PM_2.5 sampler (ChemComb) for elemental/organic carbon analysis, and a PM₁₀ sampler (Harvard Impactor) for mass and elemental analyses. There was strong evidence that these procedures result in particle concentrations above background. The dental procedures produced number concentrations of relatively small particles (<0.5 μm) that were much higher than concentrations produced for the relatively larger particles (>0.5 μm). Also, these dental procedures caused significant elevation above background of certain trace elements (measured by X-ray fluorescence) but did not cause any elevation of elemental carbon (measured by thermal optical reflectance). Dental drilling procedures aerosolize saliva and products of drilling, producing particles small enough to penetrate deep into the lungs. The potential health impacts of the exposure of dental personnel to such particles need to be evaluated. Increased ventilation and personal breathing protection could be used to minimize harmful effects.     

Interaction effects of lead on bioavailability and pharmacokinetics of arsenic in the rat

Arsenic (As) and lead (Pb) are common contaminants found in mine waste materials. For an evidence-based risk assessment, it is important to better understand the potential interaction of mixed contaminants; and this interaction study was investigated in an in vivo rat model. Following co-administration of a fixed dose of As^V as in sodium arsenate and different doses of Pb as lead acetate to Sprague–Dawley rats, blood arsenic concentration and bioavailability decreased. A decrease in As blood concentration when lead was co-administered was observed with increasing lead doses. Pharmacokinetic parameters for As in the blood showed faster absorption and elimination of this metalloid in the presence of Pb. The elimination half-life of As decreased from 67 days in As solo group to 27–30 with doses of Pb. Bioavailability of As was also decreased by 30–43 % in the presence of Pb. Decreased urinary excretion of Pb and tissue accumulation were also observed. It indicates lower absorption of As when co-administered with Pb. A probable explanation for these findings is that As co-administration with Pb could have resulted in the formation of less soluble lead arsenate. However, such an interaction between As and Pb could only explain about one-third of the variation when real mine waste materials containing both of these elements were administered to rats. This suggests that other effects from physical and chemical parameters could contribute to the bioavailability of arsenic in complex real environmental samples.