Determination of total organic halogen (TOX) in humic acids after microwave-induced combustion

Chemically chlorinated organic matter as well as natural background humic acids contain significant amounts of organically bound halogens that must be determined for assessment of environmental pollution. In this work the use of ion chromatography (IC) and inductively coupled plasma mass spectrometry (ICP-MS) is proposed for the determination of total organic Cl, Br and I concentration in humic acids extracted from various forest soil horizons after a single digestion by microwave-induced combustion (MIC). Samples were pressed as pellets and combusted using 20 bar of oxygen and ammonium nitrate solution as igniter. Analytes were absorbed in diluted alkaline solution (50 mM (NH₄)₂CO₃) and a reflux step was applied after combustion to improve analyte recoveries (5 min, microwave power of 1400 W). The accuracy was evaluated using certified reference materials (CRM) and spiked samples. Using MIC the agreement with CRM values and spike recoveries was higher than 97% for all analytes. As an advantage over conventional procedures, using MIC it was possible to digest up to eight samples in only 25 min, obtaining a single solution suitable for all halogens determination in humic acids samples by different techniques (IC and ICP-MS). The limit of detection (3σ) for Cl, Br and I obtained by IC was 1.2, 2.5 and 4.3 μg g⁻¹ and by ICP-MS it was 1.4, 0.03 and 0.002 μg g⁻¹, respectively.     

Does anthracene affect microbial activities and organic matter decomposition? A comparative study in Pinus halepensis litters from Mediterranean coastal and inland areas

The widespread concern about pollution caused by Polycyclic Aromatic Hydrocarbons (PAHs) raises the question of how they affect soil microbial communities which are potentially involved in the transformation of these pollutants. Using microcosms, we describe the effect of anthracene, a model PAH, on microbial communities inhabiting a Pinus halepensis litter from both coastal (COS) and inland (INL) Mediterranean sites. The microcosms were incubated over 3 months (25 °C, 60% WHC) and the effects of anthracene on microbial activities of both litters were monitored. Different enzyme activities (laccase, cellulase, β-glucosidase and acid phosphatase) and microbial respiration were measured and variations in litter chemical composition over incubation were determined using ¹³C Nuclear Magnetic Resonance (NMR) from both sites. Our results show that lignocellulolytic enzymes increased markedly after a 3-month incubation in COS microcosms, especially in the presence of anthracene, whereas INL microcosms were not similarly affected. These results show that anthracene not only has no toxic effect on the microbial activities tested but actually enhances the lignocellulolytic activities of the fungal communities from coastal litters, demonstrating the detoxification potential and resistance of stressed Mediterranean coastal ecosystems.     

Spatial modeling for air pollution monitoring network design: example of residential woodsmoke

The purpose of this paper is to demonstrate how to develop an air pollution monitoring network to characterize small-area spatial contrasts in ambient air pollution concentrations. Using residential woodburning emissions as our case study, this paper reports on the first three stages of a four-stage protocol to measure, estimate, and validate ambient residential woodsmoke emissions in Vancouver, British Columbia. The first step is to develop an initial winter nighttime woodsmoke emissions surface using inverse-distance weighting of emissions information from consumer woodburning surveys and property assessment data. Second, fireplace density and a compound topographic index based on hydrological flow regimes are used to enhance the emissions surface. Third, the spatial variation of the surface is used in a location-allocation algorithm to design a network of samplers for the woodsmoke tracer compound levoglucosan and fine particulate matter. Measurements at these network sites are then used in the fourth stage of the protocol (not presented here): a mobile sampling campaign aimed at developing a high-resolution surface of woodsmoke concentrations for exposure assignment in health effects studies. Overall the results show that relatively simple data inputs and spatial analysis can be effective in capturing the spatial variability of ambient air pollution emissions and concentrations.     

Effect of decision rules in choice experiments on hunting and bushmeat trade

Providing insight on decisions to hunt and trade bushmeat can facilitate improved management interventions that typically include enforcement, alternative employment, and donation of livestock. Conservation interventions to regulate bushmeat hunting and trade have hitherto been based on assumptions of utility- (i.e., personal benefits) maximizing behavior, which influences the types of incentives designed. However, if individuals instead strive to minimize regret, interventions may be misguided. We tested support for 3 hypotheses regarding decision rules through a choice experiment in Tanzania. We estimated models based on the assumptions of random utility maximization (RUM) and pure random regret maximization (P-RRM) and combinations thereof. One of these models had an attribute-specific decision rule and another had a class-specific decision rule. The RUM model outperformed the P-RRM model, but the attribute-specific model performed better. Allowing respondents with different decision rules and preference heterogeneity within each decision rule in a class-specific model performed best, revealing that 55% of the sample used a P-RRM decision rule. Individuals using a P-RRM decision rule responded less to enforcement, salary, and livestock donation than did individuals using the RUM decision rule. Hence, 3 common strategies, enforcement, alternative income-generating activities, and providing livestock as a substitute protein, are likely less effective in changing the behavior of more than half of respondents. Only salary elicited a large (i.e. elastic) response, and only for one RUM class. Policies to regulate the bushmeat trade based solely on the assumption of individuals maximizing utility, may fail for a significant proportion of the sample. Despite the superior performance of models that allow both RUM and P-RRM decision rules there are drawbacks that must be considered before use in the Global South, where very little is known about the social–psychology of decision making.     

基于双论域粗糙集的大学生综合成绩影响因素研究

利用双论域粗糙集理论,从个人、家庭、学校、社会四个方面对大学生综合成绩的影响因素进行了研究。对问卷调查获取到的大学生综合成绩与影响因素的数据进行了相关性分析,得到了综合成绩和影响因素之间的二元关系;然后利用双论域粗糙集的规则提取算法,分别获得了由综合成绩导出影响因素以及由影响因素确定综合成绩的规则。     

Relating manufacturing system configuration to life-cycle environmental performance: discrete-event simulation supplemented with LCA

To meet the increasing need for practical life-cycle thinking in manufacturing, this paper proposes a method that includes the life-cycle perspective in manufacturing decision making. This method combines discrete-event simulation (DES) – commonly used for the conceptual evaluation of manufacturing systems – with life-cycle assessment (LCA). This combination captures the dynamic interrelationships between manufacturing processes in order to analyse systemic responses to configuration changes, something static LCA modelling cannot do. The method evolved when a bearing production line at SKF was being examined to relate manufacturing decision making to environmental consequences. This was done using DES to investigate how parameters normally used to optimize traditional manufacturing system performance influence energy use and material losses in manufacturing systems. The environmental consequences of this material loss and energy use are further calculated using LCA methodology. Results indicate that while the combination of the two methods increases the data collection workload, it uncovers previously hidden environmental consequences of manufacturing decision making and introduces a way to assess an industrial actor’s manufacturing system using relevant LCA scenarios.     

Sorption, desorption and mineralisation of the herbicides glyphosate and MCPA in samples from two Danish soil and subsurface profiles

The vertical distribution of the sorption, desorption and mineralisation of glyphosate and MCPA was examined in samples from two contrasting soil and subsurface profiles, obtained from a sandy agricultural site and a non-agricultural clay rich site. The highest mineralisation of [14C-methylen]glyphosate, with 9.3-14.7% degraded to 14CO2 within 3 months was found in the deepest sample from the clay site. In the deeper parts of the sandy profile high sorption and low desorption of glyphosate coincided with no or minor mineralisation indicating a limited glyphosate bioavailability. MCPA was readily mineralised except in the deepest samples from both sites. The highest MCPA mineralisation was detected just below the surface layers with 72% or 44% degraded to 14CO2 at the sandy or the clay sites, respectively. MCPA sorped to a minor extent in all samples and no indications of sorption-controlled mineralisation was revealed. None of the herbicides were mineralised under anoxic conditions.     

Degradation and mobility of linear alkylbenzene sulfonate and nonylphenol in sludge-amended soil

Degradation and mobility of the surfactants linear alkylbenzene sulfonate (LAS) and nonylphenol (NP) were investigated in a lysimeter study using a sandy loam soil and 45-cm soil columns. Anaerobically digested sewage sludge was incorporated in the top-15-cm soil layer to an initial content of 38 mg LAS and 0.56 mg NP kg(-1) dry wt., respectively. Spring barley (Hordeum vulgare L.) was sown onto the columns. The lysimeters were placed outdoors and therefore received natural precipitation, but were also irrigated to a total amount of water equivalent to 700 mm of precipitation. Leachate and soil samples from three soil layers were collected continuously during a growth period of 110 d. Leachate samples and soil extracts were concentrated by solid-phase extraction (SPE) and analyzed using high performance liquid chromatography (HPLC) with fluorescence detection. The concentrations in the top-15-cm soil layer declined to 25 and 45% of the initial contents for LAS and NP, respectively, within the first 10 d of the study. At the end of the study, less than 1% LAS was left, while the NP content was below the detection limit. Assuming first-order degradation kinetics, half-lives of 20 and 37 d were estimated for LAS and NP, respectively. The surfactants were not measured in leachate samples in concentrations above the analytical detection limits of 4.0 and 0.5 microg L(-1) for LAS and NP, respectively. In addition, neither LAS nor NP were measured in concentrations above the detection limits of 150 and 50 microg kg(-1) dry wt., respectively, in soil layers below the 15 cm of sludge incorporation, indicating negligible downward transport of the surfactants in the lysimeters.     

A survey of forest workers in New Zealand. Do hours of work, rest, and recovery play a role in accidents and injury?

PROBLEM: A number of structural and organizational changes have occurred recently within the New Zealand Forestry Industry, with concerns being raised about the impact of these changes on the forestry worker in terms of fatigue, sleepiness, and compromised safety. This study explored the relationship of fatigue, and some of its key determinants, with accidents and injuries in a group of forestry industry workers in New Zealand. METHOD: A total of 367 forestry workers responded to a self-administered questionnaire. RESULTS: Fatigue was found to be commonly experienced at work in the forest, with 78% of workers reporting that they experienced fatigue at least "sometimes." This study found that certain groups of workers reported long working hours, reduced sleep, compromised recovery time, and intensely paced work. The results of logistic regression analysis showed that recent sleep, number of breaks taken during the workday, and specific job/tasks were independently associated with reporting of high fatigue levels at work. Near-miss injury events were significantly more common among those reporting a high level of fatigue at work. Accidents and lost-time injury were associated with length of time at work, ethnicity, and having had near-miss injury events. DISCUSSION: Together, these results suggest that fatigue and aspects of work organization, which are likely to be fatiguing, may be associated with compromised safety for forest workers. IMPACT ON INDUSTRY: With an already slim margin of error present in forest operations, an impairment due to increased fatigue may constitute a significant risk factor for accidents and injuries in this workforce. The results indicate the need for further examination of shift and workload management among forestry workers, as well as a role for improving industry awareness about the causes and consequences of fatigue.