Microbial phytotoxins as potential herbicides

Abstract

Microbes are sources of a diverse array of phytotoxic compounds. These compounds are generally structurally different from commercial herbicides, targeting different molecular sites of action within the plant. These novel structures and sites can be excellent leads for the discovery and development of safer synthetic herbicides. Microbial phytotoxins are often more environmentally benign than synthetic herbicides. Examples of phytotoxins from fungi (AAL‐toxin, cornexistin, cyperin, and tentoxin) with novel structures and sites of action are discussed. AAL‐toxin is toxic to a wide variety of weeds at very low dose rates. AAL‐toxin and many of its analogues kill plants by inhibiting a ceramide synthase‐like enzyme, causing rapid accumulation of free sphingoid bases that disrupt membranes. Cornexistin appears to be metabolically cnverted to an inhibitor of certain aspartate amino transferase isoenzymes. Its activity can be reversed by feeding aspartate and glutamate or with tricarboxylic acid cycle intermediates. Its activity is much like that of (aminooxy)acetate. Cyperin is a diphenylether phytotoxin that inhibits protoporphyrinogen oxidase, but does not kill plants by this mechanism. It appears to have other effects on porphyrin metabolism. Tentoxin is toxic by two mechanisms. It disrupts chloroplast development by inhibiting the processing of a nuclear‐coded plastid protein, and it also inhibits photophosphorylation by acting as an energy transfer inhibitor of coupling factor 1 ATPase. Other examples of phytotoxins from microbes with promise as herbicides will be mentioned.     

Identification of Sources Contributing to Mid-Atlantic Regional Aerosol

Abstract

Source types or source regions contributing to the concentration of atmospheric fine particles measured at Brigantine National Wildlife Refuge, NJ, were identified using a factor analysis model called Positive Matrix Factorization (PMF). Cluster analysis of backward air trajectories on days of high- and low-factor concentrations was used to link factors to potential source regions. Brigantine is a Class I visibility area with few local sources in the center of the eastern urban corridor and is therefore a good location to study Mid-Atlantic regional aerosol. Sulfate (expressed as ammonium sulfate) was the most abundant species, accounting for 49% of annual average fine mass. Organic compounds (22%; expressed as 1.4 × organic carbon) and ammonium nitrate (10%) were the next abundant species. Some evidence herein suggests that secondary organic aerosol formation is an important contributor to summertime regional aerosol.

Nine factors were identified that contributed to PM_2.5 mass concentrations: coal combustion factors (66%, summer and winter), sea salt factors (9%, fresh and aged), motor vehicle/mixed combustion (8%), diesel/Zn-Pb (6%), incinerator/industrial (5%), oil combustion (4%), and soil (2%). The aged sea salt concentrations were highest in springtime, when the land breeze-sea breeze cycle is strongest. Comparison of backward air trajectories of high- and low-concentration days suggests that Brigantine is surrounded by sources of oil combustion, motor vehicle/mixed combustion, and waste incinerator/industrial emissions that together account for 17% of PM_2.5 mass. The diesel/Zn-Pb factor was associated with sources north and west of Brigantine. Coal combustion factors were associated with coal-fired power plants west and southwest of the site. Particulate carbon was associated not only with oil combustion, motor vehicle/mixed combustion, waste incinerator/industrial, and diesel/Pb-Zn, but also with the coal combustion factors, perhaps through common transport.     

A longitudinal study of mentor and protégé outcomes in formal mentoring relationships

This study examined relationships between mentoring functions offered and transformational leadership as a mentor outcome and affective well‐being and organizational commitment as mutual outcomes for both mentors and protégés. For this examination, we conducted a longitudinal field study by using 111 matched reports from both mentors and protégés collected at three different points in time over seven months in nine Korean companies that administered a standardized formal mentoring program. Study results showed that mentoring functions assessed at Time 2 were positively associated with mentors' and protégés' post‐mentoring outcomes at Time 3 after controlling for pre‐mentoring initial levels of those outcomes at Time 1. Study findings also revealed that relative effects of mentoring on the mentor and protégé outcomes differed by the types of mentoring functions. We discuss the theoretical, practical, and methodological implications from these results. Copyright © 2012 John Wiley & Sons, Ltd.     

Distributions of heavy metals in the sediments of South Korean harbors

Bottom sediments of harbors in the South Korea have been long suspected for metal contamination due to ship-based and urban-based activities for the past several decades. A number of areas have been suspected to impair ecosystem services to the local residents and drawn complaints from main stakeholders. Twelve contamination suspected harbors were subject to evaluate the level of contamination of Cr, Ni, Cu, Zn, As, Cd, Pb and Hg. The level of sediment contamination for each metal was evaluated comparing the relative enrichment of a given metal to pollution-insensitive aluminum. Regional background concentration of a given metal was also determined based on its down core measurement and sediment texture. Ecological risk posed by the presence of heavy metals was evaluated using the sediment quality guidelines (SQGs) developed by United States National Ocean and Atmosphere Administration (US NOAA) as benchmarks for evaluating sediment chemistry to aquatic organisms. Cu, Zn, Cd, Pb and Hg in the surface sediment were found to be higher than a factor of 1.5 than background sediments, and the overall metal contaminations of surface sediment can be regarded as medium-high- to high-priority sites in the sense of SQGs.     

Identification of sources contributing to Mid-Atlantic regional aerosol

Source types or source regions contributing to the concentration of atmospheric fine particles measured at Brigantine National Wildlife Refuge, NJ, were identified using a factor analysis model called Positive Matrix Factorization (PMF). Cluster analysis of backward air trajectories on days of high- and low-factor concentrations was used to link factors to potential source regions. Brigantine is a Class I visibility area with few local sources in the center of the eastern urban corridor and is therefore a good location to study Mid-Atlantic regional aerosol. Sulfate (expressed as ammonium sulfate) was the most abundant species, accounting for 49% of annual average fine mass. Organic compounds (22%; expressed as 1.4 x organic carbon) and ammonium nitrate (10%) were the next abundant species. Some evidence herein suggests that secondary organic aerosol formation is an important contributor to summertime regional aerosol. Nine factors were identified that contributed to PM2.5 mass concentrations: coal combustion factors (66%, summer and winter), sea salt factors (9%, fresh and aged), motor vehicle/mixed combustion (8%), diesel/Zn-Pb (6%), incinerator/industrial (5%), oil combustion (4%), and soil (2%). The aged sea salt concentrations were highest in springtime, when the land breeze-sea breeze cycle is strongest. Comparison of backward air trajectories of high- and low-concentration days suggests that Brigantine is surrounded by sources of oil combustion, motor vehicle/mixed combustion, and waste incinerator/industrial emissions that together account for 17% of PM2.5 mass. The diesel/Zn-Pb factor was associated with sources north and west of Brigantine. Coal combustion factors were associated with coal-fired power plants west and southwest of the site. Particulate carbon was associated not only with oil combustion, motor vehicle/mixed combustion, waste incinerator/industrial, and diesel/Pb-Zn, but also with the coal combustion factors, perhaps through common transport.     

Identification of triploid trophoblast cells in peripheral blood of a woman with a partial hydatidiform molar pregnancy

In a woman with a partial hydatidiform molar pregnancy with 69,XXY karyotype, the presence of male fetal cells of trophoblastic origin was demonstrated in maternal blood by X/Y-chromosome specific PCR and by immunostaining combined with FISH on two cell populations isolated from maternal blood. Blood was obtained three weeks prior to the detection of fetal demise, at 13 weeks' gestation. Results were confirmed on formalin-fixed paraffin-embedded molar tissue, removed at 16 weeks' gestational age for therapeutic reasons. The results indicate that both plasma and cells from maternal peripheral blood might be useful for non-invasive prenatal diagnosis of fetal aneuploidies, as described in the current case with a partial molar pregnancy. Copyright © 2001 John Wiley & Sons, Ltd.     

A river water quality management model for optimising regional wastewater treatment using a genetic algorithm

To achieve water quality goals and wastewater treatment cost optimisation in a river basin, a water quality management model has been developed through the integration of a genetic algorithm (GA) and a mathematical water quality model. The developed model has been applied to the Youngsan River, where water quality has decreased due to heavy pollutant loads from Kwangju City and surrounding areas. Pollution source, land use, geographic features and measured water quality data of the river basin were incorporated into the Arc/View geographic information system database. With the database, the management model calculated treatment type and treatment cost for each wastewater treatment plant in the river basin. Until now, wastewater treatment policy for polluted rivers in Korea has been, first of all, to construct secondary treatment plants for untreated areas, and secondarily, to construct advanced treatment plants for the river sections whose water quality is impaired and for which the water quality goal of the Ministry of Environment is not met. Four scenarios that do not use the GA were proposed and they were compared with the results of the management model using the GA. It became clear that the results based on the GA were much better than those for the other four scenarios from the viewpoint of the achievement of water quality goals and cost optimisation.     

Characterization and recovery of mercury from spent fluorescent lamps

Fluorescent lamps rely on mercury as the source of ultraviolet radiation for the production of visible light. Partitioning of mercury among vapor phase, loose phosphor powders produced during breaking and washing steps, glass matrices, phosphor powders attached on the glass and aluminum end caps was examined from simulated laboratory lamp recycling tests for different types of spent and new fluorescent lamps. Mercury concentrations in lamp glasses taken from commercial lamp recyclers were also analyzed for comparison with the simulated results of spent and new lamps of different types. The mercury content of the glass from spent lamps was highly variable depending on the lamp type and manufacturer; the median values of the mercury concentration in glasses for spent 26- (T8) and 38-mm (T12) diameter fluorescent lamps were approximately 30 and 45 microg/g, respectively. The average mercury concentration of samples taken from recycler A was 29.6 microg/g, which was about 64% of median value measured from the spent T12 lamps. Over 94% of total mercury in lamps remained either as a component of phosphor powders attached inside the lamp or in glass matrices. New T12 lamps had a higher partitioning percentage of elemental mercury in the vapor phase (0.17%) than spent T12 lamps (0.04%), while spent lamps had higher partitioning percentages of mercury resided on end-caps and phosphor powders detached from the breaking and washing steps. The TCLP values of simulated all lamp-glasses and samples obtained from recyclers were higher than the limit of LDR standard (0.025 mg/L). After investigating acid treatment and high temperature treatment as mercury reclamation techniques, it was found that heating provided the most effective mercury capture. Although the initial mercury concentrations of individual sample were different, the mercury concentrations after 1 h exposure at 100 degrees C were below 4 mug/g for all samples (i.e., <1% remaining). Therefore, it is recommended that heating be used for recovering mercury from spent fluorescent lamps.     

Monitoring of non-point source pollutants load from a mixed forest land use

The aim of this study was to determine the unit load of NPS (non-point source) pollutants including organic variables such as BOD (biochemical oxygen demand),COD (chemical oxygen demand) and DOC (dissolved organic carbon),nitrogen and phosphorus constituents,and suspended solids (SS) and their event mean concentration (EMC) of runoff flows from a water-shed of mixed forest land use by intensive field experiments.Field monitoring for continuous measurements of rainfall,flow,and water quality was conducted over 12 storm events during 2008–2009 using automated and manual sampling methods.The EMCs of individual runoff event were estimated for each water quality constituent based on the flow rate and concentration data of runoff discharge.The average EMCs of BOD,COD,DOC,SS,TN (total nitrogen),NH 4+ -N,NO 3- -N,TP (total phosphorus),PO 43- -P from the mixed forest land were 1.794,3.498,1.462,10.269,0.862,0.044,0.634,0.034,and 0.005 mg/L,respectively.The annual unit loads of BOD,COD,DOC,SS,TN,NH 4+ -N,NO 3- -N,TP and PO 43--P were estimated as 66.9,133.2,55.5,429.8,36.5,1.6,26.9,1.3 and 0.1 kg/(ha·yr),respectively.In addition,affecting parameters on the EMCs were investigated by statistic analysis of the field data.As a result,significant correlations with precipitation,rainfall intensity,and total runoff flows were found in most constituents.