Aging estimation of reactor pressure vessel in the field using magnetic properties

Many researchers have been interested in the nondestructive measurement methods for estimating components damage in order to assure the safe service of steel structures. It is recognized that the evaluating techniques based on magnetic measurement can offer a great potential because of high susceptibility to the change of several metallurgical factors. Magnetic property such as coercive force was measured. The coercive force at room temperature monotonously increased with the increase of frequency. The correlation between the magnetic properties of used material and that of un-used material was studied. The coercive force gradient at room temperature increased with the increase of aging. Hence the estimating method using magnetic properties allows one to evaluate the extent of material aging for reactor pressure vessel.     

Exposure assessment of particulate matter and blood chromium levels in people living near a cement plant

This study evaluates the effect of air pollution caused by cement plants on nearby residential areas and performs an exposure assessment of particulate matter (PM) and total Cr, Cr⁶⁺, Pb, and Al. Further, the blood Cr levels of residents exposed to PM released by cement plants are also assessed. Nine buildings (eight residential and one elementary school building) close to cement plants were selected for this study, which were located in Pyeongtaek port, in west of Gyeonggi Province, South Korea. A total of 51 suspended particulate samples were collected at a flow rate of 2.0 L/min. Total Cr was more widely detected in residents’ houses and elementary schools. PM levels were higher at distances of 4.1 and 4.8 km than those at closer distances of 2.7 km. This was due to the influence of wind direction. The estimated mean blood level of Cr for the study participants was 3.80 μg/L, which is higher than levels estimated by other studies on Cr blood levels. Therefore, cement plants could cause an increase in total Cr and blood Cr levels in residential areas, and more continuous monitoring is necessary to better understand their impacts.     

Analysis of gas flow behavior in an annular fluidized-bed reactor for polystyrene waste treatment

The characteristics of bubble properties and the chaotic flow behavior of gas were investigated in an annular fluidized bed (0.102 m in inner diameter and 2 m in height) because the behavior of gas flow in such a reactor is one of the important factors governing reactor operation, reactor performance, and the reaction itself. Pressure fluctuations as a state variable for the analysis of gas flow behavior were measured and analyzed. Bubble properties were determined by adopting the cross-correlation function of pressure fluctuations. The resultant chaotic flow behavior of gas was interpreted by means of chaotic parameters such as the Kolmogorov entropy. It was found that the Kolmogorov entropy could be utilized effectively to explain the nonlinear dynamic behavior of gas-solid flow in the annular fluidized bed. The pierced length and rising velocity of bubbles increased with increasing gas velocity, bed temperature, and particle size of the bed material. The bubble frequency increased with increasing gas velocity and bed temperature, while it decreased with increasing particle size of the bed material. Correlations to predict the bubble properties in annular fluidized-bed reactors were suggested.     

Reducing security vulnerabilities for critical infrastructure

In this paper, we show the need for improved Process Control System (PCS) security, and describe some of the promising research areas in PCS security. One implementation of PCS in critical infrastructure and factory automation is a supervisory, control, and data acquisition (SCADA) system, a real-time industrial process control system which centrally monitors and controls remote and/or local processes utilizing plant, equipment, or devices (such as switches, valves, pumps, relays, etc.) while collecting and logging field data. Current SCADA systems are distributed, networked, and dependent on open protocols for the internet, which are exposed to remote cyber terrorism. They are particularly vulnerable to unauthorized access. We give some examples of SCADA processes with natural gas control systems in USA and the Ubiquitous Sensor Network (USN) in Korea. We also examine a representative vulnerability and corresponding measures for security, and present an example of concrete measures for the security of mass transportation as a critical infrastructure.     

Contamination of polychlorinated biphenyls and organochlorine pesticides in breast milk in Korea: Time-course variation,influencing factors,and exposure assessment

Breast milk is a noninvasive specimen to assess maternal and infant exposure to polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs). In this study, 206 breast milk samples were collected from 87 participants during lactation, at <7, 15, 30, or 90 days postpartum in four cities in Korea. The total concentrations of PCBs (ΣPCB) and OCPs (ΣOCP) ranged from <LOQ to 84.0 (median: 12.1) ng g⁻¹ lipid weight and from <LOQ to 559 (median: 144) ng g⁻¹ lipid weight, respectively. The residue levels of these contaminants measured in our study were relatively lower than those reported for European, African and Asian populations. Within a month postpartum typically after day seven the levels of ΣPCB and ΣOCP significantly increased. Some OCP compounds were correlated with maternal age, BMI, parity, and delivery mode. Certain types of dietary habits such as seafood and noodle consumption were significantly associated with ΣPCB and ΣOCP. The estimated daily intakes (EDIs) of ΣPCB and ΣOCP were 45.2–127 ng kg⁻¹ bw day⁻¹ and 625–1259 ng kg⁻¹ bw day⁻¹ during lactation, respectively, which are lower than the threshold values proposed by the US EPA and Health Canada. The exposure of Korean infants to chlordanes via breast milk had a potential health risk which deserves further investigation.     

Distribution and pollution sources of polycyclic aromatic hydrocarbons (PAHs) in reclaimed tidelands and tidelands of the western sea coast of South Korea

The wide-scale reclamation of tidal flats distributed throughout the western and southern coastal areas in Korea has been completed, in an effort to expand the available arable land. The present studies were conducted in order to characterize the concentrations and compositional patterns of selected PAHs, in order to obtain more information regarding environmental risk assessments for sustainable and environment-friendly agriculture in reclaimed tidelands and tidelands in South Korea. The PAH contents were low to moderate, relative to other urbanized regions of the world. Sigma PAHs ranged from 69.8 to 1,175.2 ng g(-1) in dry weight, with a mean value of 394.4 ng g(-1). Differences were observed in the Sigma PAHs concentrations between industrial complex areas and rural regions. The two dominant PAHs were identified as fluoranthene and pyrene. These compounds constituted 1.4 to 55.0% (mean, 33.4%) and 2.7 to 45.6% (mean, 22.0%) of the Sigma PAHs. Our correlation analysis revealed that the Sigma PAHs contents were associated significantly with the organic carbon content (R(2) = 0.86, P < 0.01) and the cation exchange capacity (CEC; R(2) = 0.89, P < 0.01) in the reclaimed tidelands and tidelands.     

Gas-phase elemental mercury removal in a simulated combustion flue gas using TiO2 with fluorescent light

A previously proposed technology incorporating TiO₂ into common household fluorescent lighting was further tested for its Hg⁰ removal capability in a simulated flue-gas system. The flue gas is simulated by the addition of O₂, SO₂, HCl, NO, H₂O, and Hg⁰, which are frequently found in combustion facilities such as waste incinerators and coal-fired power plants. In the O₂ + N₂ + Hg⁰ environment, a Hg⁰ removal efficiency (η_Hg) greater than 95% was achieved. Despite the tendency for η_Hg to decrease with increasing SO₂ and HCl, no significant drop was observed at the tested level (SO₂: 5–300 ppm_v, HCl: 30–120 ppm_v). In terms of NO and moisture, a significant negative effect on η_Hg was observed for both factors. NO eliminated the OH radical on the TiO₂ surface, whereas water vapor caused either the occupation of active sites available to Hg⁰ or the reduction of Hg₀ by free electron. However, the negative effect of NO was minimized (η_Hg > 90%) by increasing the residence time in the photochemical reactor. The moisture effect can be avoided by installing a water trap before the flue gas enters the Hg⁰ removal system.

Implications: This paper reports a novel technology for a removal of gas-phase elemental mercury (Hg⁰) from a simulated flue gas using TiO₂-coated glass beads under a low-cost, easily maintainable household fluorescent light instead of ultraviolet (UV) light. In this study, the effects of individual chemical species (O₂, SO₂, HCl, NO, and water vapor) on the performance of the proposed technology for Hg⁰ removal are investigated. The result suggests that the proposed technology can be highly effective, even in real combustion environments such as waste incinerators and coal-fired power plants.     

Soil pollution assessment and identification of hyperaccumulating plants in chromated copper arsenate (CCA) contaminated sites, Korea

In recent decades, heavy metal contamination in soil adjacent to chromated copper arsenate (CCA) treated wood has received increasing attention. This study was conducted to determine the pollution level (PL) based on the concentrations of Cr, Cu and As in soils and to evaluate the remediative capacity of native plant species grown in the CCA contaminated site, Gangwon Province, Korea. The pollution index (PI), integrated pollution index (IPI), bioaccumulation factors (BAF_shoots and BAF_roots) and translocation factor (TF) were determined to ensure soil contamination and phytoremediation availability. The 19 soil samples from 10 locations possibly contaminated with Cr, Cu and As were collected. The concentrations of Cr, Cu and As in the soil samples ranged from 50.56-94.13 mg kg⁻¹, 27.78-120.83 mg kg⁻¹, and 0.13-9.43 mg kg⁻¹, respectively. Generally, the metal concentrations decreased as the distance between the CCA-treated wood structure and sampling point increased. For investigating phytoremediative capacity, the 19 native plant species were also collected in the same area with soil samples. Our results showed that only one plant species of Iris ensata, which presented the highest accumulations of Cr (1120 mg kg⁻¹) in its shoot, was identified as a hyperaccumulator. Moreover, the relatively higher values of BAF_shoot (3.23-22.10) were observed for Typha orientalis, Iris ensata and Scirpus radicans Schk, suggesting that these plant species might be applicable for selective metal extraction from the soils. For phytostabilization, the 15 plant species with BAF_root values > 1 and TF values < 1 were suitable; however, Typha orientalis was the best for Cr.