Hydrogen-rich fuel gas production from refuse plastic fuel pyrolysis and steam gasification

In this study, experimental conditions were optimized to maximize the production of hydrogen gas from refuse plastic fuel (RPF) by pyrolysis and steam gasification processes conducted in a laboratory-scale reactor. We carried out gasification using 10-g RPF samples at different temperatures (700°-1000°C) with and without steam. The effect of the amount of steam (0–0.25 g/min) for RPF steam gasification was also studied. The effect of K₂CO₃ as a catalyst on these processes was also investigated. Experimental results showed that the hydrogen gas yield increased with temperature; with respect to the gas composition, the hydrogen content increased mainly at the expense of other gaseous compounds, which highlights the major extension of secondary cracking reactions in the gaseous fraction at higher temperatures.     

Evaluation on the property of sewage sludge cake by thermal treatment

The sewage sludge cake (SSC) used in this study was provided by a K-wastewater treatment plant in Kyonggi-Do, Korea. The characteristics of the SSC, such as particle size, water content, and composition were analyzed. Both the Korea extraction test (KET) and the toxicity characteristic leaching procedure (TCLP) were used to estimate whether the SSC was hazardous. In thermal experiments, the temperature was varied in the range 400° to 900°C and the heating time was varied from 1 to 6 h. The effects of thermal treatment temperature and time were evaluated by turbidity tests on the resultant SSC. On a dry basis, SSC mainly consisted of combustible content (60.2%) and phosphorous (25.9%). The turbidity of SSC was initially estimated in terms of the sedimentation time. The turbidity of SSC decreased exponentially from 9873 FAU at 0 h to 986 FAU at 6 h, so that the sedimentation time of SSC was established as 6 h. From the results of the thermal treatment at 600°C, thermal time can be determined by 2h because the turbidity of SSC is decreased dramatically within 1h and is stabilized after 2h. The turbidity of SSC decreased when the thermal treatment temperature increased from 400° to 900°C. The turbidity after thermal treatment at 400°C for 2 h was 29 FAU and this became almost 10 FAU at 600°C. The SSC was not hazardous, because KET and TCLP analysis produced values that were smaller than the regulatory levels. Hence, it was concluded that SSC can be stabilized by thermal treatment and can be used as a recycled material.     

Applying Multi-attribute Utility Theory to Decision Making in Environmental Planning: A Case Study of the Electric Utility in Korea

This paper applies the multi-attribute utility theory (MAUT) to obtaining value judgments concerning the significance of environmental impacts to achieve integration of environmental concerns at an early stage of planning, using the electric utility of Korea as a specific case study. An environmental multi-attribute index is constructed as a multi-attribute utility function, based on value judgments provided by a group of experts related to electric utility and a decision maker from Korea Electric Power Corporation (KEPCO). The societal values are derived from examining trade-offs between environmentalindex and money. The implications of the results for KEPCO are also discussed. We found that the work and results can provide valuable insights and decision opportunities for major decision making in environmental planning facing KEPCO.     

Effects of copper (I) oxide on growth and biochemical compositions of two marine microalgae

In copper based antifouling (AF) paints Cu (I) oxide was largely used as booster biocide. In this study effect of Cu (I) oxide on two marine microalgae, Tetraselmis suecica and Dunaliella tertiolecta was demonstrated. EC50 (96 hr) concentrations estimated for T. suecica and D. tertiolecta were 1.3 mg l(-1) and 1.34 mg l(-1), respectively. Copper (I) oxide induced changes in growth, chlorophyll, carbohydrate and protein contents were observed in T. suecica and D. tertiolecta. At low concentration of 0.0625 mg l(-1), 3-26% and 1-16% growth stimulation was observed in T. suecica and T. tertiolecta respectively. Increasing Cu (I) oxide concentrations proportionately decreased the carbohydrate and protein contents. This study clearly indicates the toxicity of excessive Cu (I) oxide on growth and biochemical compositions of T. suecica and D. tertiolecta.     

Morphological Study on Hydrolytic Degradation of Poly(tetramethylene succinate) Single Crystals and Spherulites

The morphological changes of Poly(tetramethylene succinate) single crystal lamellae by hydrolysis are investigated, using TEM, WAXD and SAXS. And the morphology of PTMS spherulites was also observed by optical microscopy after treatments as well as single crystal lamellae. The edge region of single crystal lamella can be most easily affected in the initial stage of hydrolysis. As the hydrolysis time increases, the lamellae are separated into small fragments which may be started from the uneven or irregular parts of the surface. The WAXD results showed that crystallinity were increased with increasing of treatment time. The lamellar thickness decreased at the initial stage of hydrolysis and increased again. There were cracks on the surface of spherulites after hydrolysis and the direction of cracks were tangential direction of spherulites. This result was thought to be from the uniformity of molecular arrangement in the crystallographic unit cell.     

UPLAND SOIL EROSION SIMULATION FOR AGRICULTURAL WATERSHEDS1

ABSTRACT: A soil erosion simulation model that considered the physical conditions of agricultural watersheds and that interfaced with the modified USDAHL-74 watershed hydrology model was developed. The erosion model simulates the detachment and transport of soil particles caused by raindrop impact and overland flow from rill and interrill areas. The model considers temporal and spatial variation of plant residue, crop canopy cover, snow cover, and the moisture content of surface soil as modifying factors of the erosive forces of raindrop impact and overland flow. The hydrology model simulates overland flow and some of the physical parameters that are used in the erosion model. The simulation is executed in the time interval determined by the rainfall rate or snowmelt rate. The erosion model compares the transport capacity of the overland flow and the sediment loaded in the overland flow to determine the fate account for the free soil particles that have already been detached and are readily available to be transported by the overland flow. The model was tested with data from two small agricultural watersheds in the Palouse region of the Pacific Northwest dryland. The model was calibrated by trial-and-error to determine the coefficients of the model.     

Study to improve the reactivity of magnesium cations to CO2 for carbon capture and utilization technology using edible salt manufacturing plant wastewater

Journal of Material Cycles and Waste Management - This study aims to improve the formation of MgCO3 via inorganic carbon capture utilization (CCU) technology using industrial wastewater from an...     

Assessment of water quality monitoring for the optimal sensor placement in lake Yahuarcocha using pattern recognition techniques and geographical information systems

Pollution and the eutrophication process are increasing in lake Yahuarcocha and constant water quality monitoring is essential for a better understanding of the patterns occurring in this ecosystem. In this study, key sensor locations were determined using spatial and temporal analyses combined with geographical information systems (GIS) to assess the influence of weather features, anthropogenic activities, and other non-point pollution sources. A water quality monitoring network was established to obtain data on 14 physicochemical and microbiological parameters at each of seven sample sites over a period of 13 months. A spatial and temporal statistical approach using pattern recognition techniques, such as cluster analysis (CA) and discriminant analysis (DA), was employed to classify and identify the most important water quality parameters in the lake. The original monitoring network was reduced to four optimal sensor locations based on a fuzzy overlay of the interpolations of concentration variations of the most important parameters.     

Development of a SWAT Patch for Better Estimation of Sediment Yield in Steep Sloping Watersheds1

Abstract: The watershed scale Soil and Water Assessment Tool (SWAT) model divides watersheds into smaller subwatersheds for simulation of rainfall‐runoff and sediment loading at the field level and routing through stream networks. Typically, the SWAT model first needs to be calibrated and validated for accurate estimation through adjustment of sensitive input parameters (i.e., Curve Number values, USLE P, slope and slope‐length, and so on). However, in some instances, SWAT‐simulated results are greatly affected by the watershed delineation and Digital Elevation Models (DEM) cell size. In this study, the SWAT ArcView GIS Patch II was developed for steep sloping watersheds, and its performance was evaluated for various threshold values and DEM cell size scenarios when delineating subwatersheds using the SWAT model. The SWAT ArcView GIS Patch II was developed using the ArcView GIS Avenue program and Spatial Analyst libraries. The SWAT ArcView GIS Patch II improves upon the SWAT ArcView GIS Patch I because it reflects the topographic factor in calculating the field slope‐length of Hydrologic Response Units in the SWAT model. The simulated sediment value for 321 subwatersheds (watershed delineation threshold value of 25 ha) is greater than that for 43 subwatersheds (watershed delineation threshold value of 200 ha) by 201% without applying the SWAT ArcView GIS Patch II. However, when the SWAT ArcView GIS Patch II was applied, the difference in simulated sediment yield decreases for the same scenario (i.e., difference in simulated sediment with 321 subwatersheds and 43 subwatersheds) was 12%. The simulated sediment value for DEM cell size of 50 m is greater than that for DEM cell size of 10 m by 19.8% without the SWAT ArcView GIS Patch II. However, the difference becomes smaller (3.4% difference) between 50 and 10 m with the SWAT ArcView GIS Patch II for the DEM scenarios. As shown in this study, the SWAT ArcView GIS Patch II can reduce differences in simulated sediment values for various watershed delineation and DEM cell size scenarios. Without the SWAT ArcView GIS Patch II, variations in the SWAT‐simulated results using various watershed delineation and DEM cell size scenarios could be greater than those from input parameter calibration. Thus, the results obtained in this study show that the SWAT ArcView GIS Patch II should be used when simulating hydrology and sediment yield for steep sloping watersheds (especially if average slope of the subwatershed is >25%) for more accurate simulation of hydrology and sediment using the SWAT model. The SWAT ArcView GIS Patch II is available at http://www.EnvSys.co.kr/~swat for free download.     

Environmental quality of Korean coasts as determined by modified Shannon–Wiener evenness proportion

The coast of the Korean peninsula experiences a range of human impacts, including pollution, shipping, reclamation, and aquaculture, that have motivated numerous local studies of macrobenthic organisms. In this paper, 1,492 subtidal stations were compiled from 23 studies (areas) to evaluate environmental quality on a broader scale. A common index in biomonitoring, Shannon–Wiener evenness proportion (SEP), could not incorporate azoic or single-species samples. This shortcoming was overcome by developing an inverse function of SEP (ISEP), which was positively correlated with independent measures of water quality available for nine sites and was not biased by the size of the sampling unit. Additionally, at Shihwa Dike, where samples were collected before and after reinstating a tidal connection with the ocean, ISEP values improved over time, as expected. Thus, it is now possible to assign Korean subtidal sites to seven ISEP “grades” and to use their values and trends to guide coastal management.