Decolourization of synthetic dyes by Trametes hirsuta in expanded-bed reactors

The present paper studies the decolourization of different synthetic dyes (Indigo Carmine, Bromophenol Blue, Methyl Orange and Poly R-478) by the white-rot fungus Trametes hirsuta at bioreactor scale under solid-state conditions, operating with ground orange peelings as a support-substrate. Dye decolourization was performed in both batch and continuous mode. Batch cultivation led to high decolourization percentages in a short time (100% for Indigo Carmine in 3h and 85% for Bromophenol Blue in 7 h). As for continuous cultivation, different hydraulic retention times (HRT) were studied (0.8, 1, 1.5 and 3d). The highest decolourization percentages were obtained operating at a HRT of 3d, especially for the dyes Methyl Orange and Poly R-478 (81.4% and 46.9%, respectively). This is a very interesting result, since there are few studies dealing with the continuous decolourization of dyes at bioreactor scale by fungal laccases.     

The influence of time on lead toxicity and bioaccumulation determined by the OECD earthworm toxicity test

Internationally agreed standard protocols for assessing chemical toxicity of contaminants in soil to worms assume that the test soil does not need to equilibrate with the chemical to be tested prior to the addition of the test organisms and that the chemical will exert any toxic effect upon the test organism within 28 days. Three experiments were carried out to investigate these assumptions. The first experiment was a standard toxicity test where lead nitrate was added to a soil in solution to give a range of concentrations. The mortality of the worms and the concentration of lead in the survivors were determined. The LC50s for 14 and 28 days were 5311 and 5395 microgPb g(-1)soil respectively. The second experiment was a timed lead accumulation study with worms cultivated in soil containing either 3000 or 5000 microgPb g(-1)soil. The concentration of lead in the worms was determined at various sampling times. Uptake at both concentrations was linear with time. Worms in the 5000 microg g(-1) soil accumulated lead at a faster rate (3.16 microg Pb g(-1)tissue day(-1)) than those in the 3000 microg g(-1) soil (2.21 microg Pb g(-1)tissue day(-1)). The third experiment was a timed experiment with worms cultivated in soil containing 7000 microgPb g(-1)soil. Soil and lead nitrate solution were mixed and stored at 20 degrees C. Worms were added at various times over a 35-day period. The time to death increased from 23 h, when worms were added directly after the lead was added to the soil, to 67 h when worms were added after the soil had equilibrated with the lead for 35 days. In artificially Pb-amended soils the worms accumulate Pb over the duration of their exposure to the Pb. Thus time limited toxicity tests may be terminated before worm body load has reached a toxic level. This could result in under-estimates of the toxicity of Pb to worms. As the equilibration time of artificially amended Pb-bearing soils increases the bioavailability of Pb decreases. Thus addition of worms shortly after addition of Pb to soils may result in the over-estimate of Pb toxicity to worms. The current OECD acute worm toxicity test fails to take these two phenomena into account thereby reducing the environmental relevance of the contaminant toxicities it is used to calculate.     

Uranium transport around the reactor zone at Bangombé and Okélobondo (Oklo): examples of hydrogeological and geochemical model integration and data evaluation

The sites at Bangombé and Okélobondo (Oklo) in Gabon provide a unique opportunity to study the behaviour of products from natural nuclear reactions in the vicinity of reactor zones which were active around two billion years ago. The Commission of the European Communities initiated the Oklo Natural Analogue Programme. One of the principal aims was to study indications of present time migration of elements from the reactor zones under ambient conditions. The hydrogeological and hydrochemical data from the Oklo sites were modelled in order to better understand the geochemical behaviour of radionuclides in the natural system, by using independent models and by comparing the modelling outcome. Two modelling approaches were used: M3 code (hydrochemical mixing and mass balance model), developed by the Swedish Nuclear Fuel and Waste Management Company (SKB) and HYTEC (reactive transport model) developed by Ecole des Mines de Paris. Two different reactor zones were studied: Bangombé, a shallow site, the reactor being at 11 m depth, and OK84 at Okélobondo, situated at about 450 m depth, more comparable with a real repository location. This allowed the validation of modelling tools in two different sedimentary environments: one shallow, with a more homogeneous layering situated in an area of meteoric alteration, and the other offering the opportunity to study radionuclide migration from the reaction zone over a distance of 450 m through very heterogeneous sedimentary layers. The modeling results indicate that the chemical reactions retarding radionuclide transport are very different at the two sites. At Bangombé, the decomposition of organic material consumes oxygen and at Okélobondo the oxygen is consumed by inorganic reactions resulting, in both cases, in uranium retardation. Both modelling approaches (statistic with M3 code and deterministic with HYTEC code) could describe this situation. The goal of this exercise is to test codes which can help to describe and understand the processes taking place at the sites, validate the models with in situ data, and thus build confidence in the tools used for future site characterization. Ultimately, this allows identifying and selecting processes and parameters that can be used as input into repository performance assessment calculations and modelling exercises.     

Effect of pH control at the anode for the electrokinetic removal of phenanthrene from kaolin soil

Polycyclic aromatic hydrocarbon (PAH)-contaminated soils exist at numerous sites, and these sites may threaten public health and the environment because many PAH compounds are toxic, mutagenic, and/or carcinogenic. PAHs are also hydrophobic and persistent, so conventional remediation methods are often costly or inefficient, especially when the contaminants are present in low permeability and/or organic soils. An innovative technique, electrokinetically enhanced in situ flushing, has the potential to increase soil-solution-contaminant interaction and PAH removal efficiency for low permeability soils; however, the electrolysis reaction at the anode may adversely affect the remediation of low acid buffering capacity soils, such as kaolin. Therefore, the objective of this study was to improve the remediation of low acid buffering soils by controlling the pH at the anode to counteract the electrolysis reaction. Six bench-scale electrokinetic experiments were conducted, where each test employed one of three different flushing solutions, deionized water, a surfactant, or a cosolvent. For each of these solutions, tests were performed with and without a 0.01 M NaOH solution at the anode to control the pH. The test using deionized water with pH control generated a higher electroosmotic flow than the equivalent test performed without pH control, but the electroosmotic flow difference between the surfactant and cosolvent tests with and without pH control was minor compared to that observed with the deionized water tests. Controlling the pH was beneficial for increasing contaminant solubilization and migration from the soil region adjacent to the anode, but the high contaminant concentrations that resulted in the middle or cathode soil regions indicates that subsequent changes in the soil and/or solution chemistry caused contaminant deposition and low overall contaminant removal efficiency.     

Sorption of As(V) ions by akaganéite-type nanocrystals

A priority pollution problem, the removal of arsenate oxyanions from dilute aqueous solutions by sorption onto synthetic akaganéite (beta-FeO(OH)) was the aim of the present study. This is an innovative inorganic adsorbent material prepared in the laboratory, following a new method of preparation. The effect of akaganéite and arsenate concentration, the contact time, temperature, solution pH value, and ionic strength variation on the treatment process was mainly investigated during this study. Typical adsorption isotherms were determined, which were found to fit sufficiently the typical Langmuir equation. The mechanism of sorption was examined by electrokinetic, X-ray diffraction, Fourier transmission infrared and scanning electron microscopy measurements. Promising results were obtained, due to the favourite characteristics of the adsorbent applied.     

Metal ion removal from water by sorption on paper mill sludge

Chromatographic columns packed with paper mill sludge are employed for metal ion recovery from water. The breakthrough curves show that cadmium, copper, lead and silver are removed from acid solutions (pH 2, 4); the affinity series is Pb(II)>Cu(II)>Ag(I)>Cd(II). Both the amount of metal retained and the metal-matrix interaction are pH dependent; the sorptive capacity increases with increasing pH. When the metals are present together at the same initial concentrations a competition among the different ions occurs although the affinity order remains unchanged. In metal recovery from the paper mill sludge column, the total amount of the cadmium and copper is displaced by HCl 1.0 M, 65% of the lead by HCl 0.1 M and 75% of the silver by HNO(3) 0.1 M. More than 95% of copper and lead and less than 20% of cadmium were recovered with HCl 0.1 M when the metals were present at the same time.     

Congener-specific accumulation of polychlorinated biphenyls in ovarian follicular wall follows repeated exposure to PCB 126 and PCB 153. Comparison of tissue levels of PCB and biological changes

OBJECTIVE: Small (SF), medium (MF) and large (LF) preovulatory porcine follicles were isolated and incubated in an Erlenmeyer flask containing 5 ml of medium with addition of PCB 126 or PCB 153 to test differences in their accumulation in the follicular wall. METHODS; The follicles were incubated in M199 medium at 37 degrees C with constant shaking at 70 rpm, for 6 days. The media were changed every day and repeated dose 25 pg/ml of PCB 126 or 25 ng/ml of PCB 153 was added each day till 6 days of culture. Media were collected every day and frozen for steroid analysis by RIA. 24 h after the last treatment follicles were frozen for further polychlorinated biphenyls (PCB) content analysis. PCB concentrations in the follicular wall were analysed by mass spectrometry. RESULTS: 3.3%; 3.6% and 5.6% of total PCB 126 dose, and 71%; 71.4% and 30.4% of total PCB 153 dose accumulated in SF, MF and LF follicles, respectively. The accumulative effect of PCB was manifested by the disruption of estradiol (E2) secretion. In SF antiestrogenic action of PCB 126 was observed during the whole time of exposure while PCB 153 decreased E2 till 4 days of culture and then estrogenic action was observed. In MF, both these congeners decreased E2 till 5 days of exposure and then estrogenic actions were noted with the highest magnification in the case of PCB 126. In LF both PCB studied increased E2 till 3 days of exposure with the highest magnification of PCB 126, then antiestrogenic action was noted. Testosterone secretion was generally affected in a pattern oposite to that of E2 suggesting action on P450arom activity. CONCLUSION: The results of these studies demonstrated that disruption of aromatization process in the follicles following repeated exposure to both congeners is not directly correlated with the bioaccumulation or amount of PCB within the follicular wall.     

AFLP analysis as biomarker of exposure to organic and inorganic genotoxic substances in plants

In recent years several plant species have been in use as bioindicators and several tests have been developed to evaluate the toxicity of environmental pollutants in vegetal organisms. In the present paper Arabidopsis thaliana (L.) Heynh. (ecotype Wassilewskija) was used as bioindicators of two genotoxic substances: potassium dichromate and dihydrophenanthrene. Inhibition of seed germination was observed with both pollutants. AFLP analysis (i) indicated that both substances are genotoxic, (ii) showed that dihydrophenanthrene induces DNA changes in different target sequences than potassium dichromate, (iii) quantified the genotoxic effect using cluster analysis by comparing DNA from treated plants with that of control plants. On the basis of these considerations we suggest that AFLP method is a powerful tool for measuring qualitative and quantitative genotoxic activity due to environmental pollutants. AFLP method can be applied to a wide range of bioindicator organisms and may become a universal methodology to identify target genes for specific genotoxic agents. This could open up possibilities for designing specifically targeted assays and new approaches to risk assessment.     

Removal of heavy metals from a metaliferous water solution by Typha latifolia plants and sewage sludge compost

Typha latifolia plants, commonly known as cattails, were grown in a mixture of mature sewage sludge compost, commercial compost and perlite (2:1:1 by volume). Four Groups (A, B, C and D) were irrigated (once every two weeks) with a solution containing different concentrations of Cu, Ni, and Zn, where in the fifth (group M) tap water was used. At the end of the 10 weeks experimental period substrate and plants were dried, weighed and analysed for heavy metals. The amounts of all three metals removed from the irrigation solution, were substantial. In the roots and leaves/stems of T. latifolia the mean concentration of Zn reached values of 391.7 and 60.8 mg/kg of dry weight (d.w.), respectively. In the substrate of Group D all three metals recorded their highest mean concentrations of 1156.7 mg/kg d.w. for Cu, 296.7 mg/kg d.w. for Ni and 1231.7 mg/kg d.w. for Zn. Linear correlation analyses suggested that there was a linear relationship between the concentration of metals in the solutions and the concentration of metals in the substrates at the end of the experiment. The percentage removal of the metals in the substrate was large, reaching 100% for Cu and Zn in some groups and almost 96% for Ni in group D. The total amount of metals removed by the plants was considerably smaller than that of the substrate, due mainly to the small biomass development. A single factor ANOVA test (5% level) indicated that the build up in the concentration of metals in the roots and the leaves/stems was due to the use of metaliferous water solution and not from the metals pre-existing in the substrate. The contribution of the plants (both roots and leaves/stems) in the removing ability of the system was less than 1%.     

PM2.5 assessment in 21 European study centers of ECRHS II: Method and first winter results

The follow-up of a cohort of adults from 29 European centers of the former European Community Respiratory Health Survey (ECRHS) I (1989-1992) will examine the long-term effects of exposure to ambient air pollution on the incidence, course, and prognosis of respiratory diseases, in particular asthma and decline in lung function. The purpose of this article is to describe the methodology and the European-wide quality control program for the collection of particles with 50% cut-off size of 2.5 microm aerodynamic diameter (PM2.5) in the ECRHS II and to present the PM2.5 results from the winter period 2000-2001. Because PM2.5 is not routinely monitored in Europe, we measured PM2.5 mass concentrations in 21 participating centers to estimate background exposure in these cities. A standardized protocol was developed using identical equipment in each center (U.S. Environmental Protection Agency Well Impactor Ninety-Six [WINS] and PQ167 from BGI, Inc.). Filters were weighed in a single central laboratory. Sampling was conducted for 7 days per month for a year. Winter mean PM2.5 mass concentrations (November 2000-February 2001) varied substantially, with Iceland reporting the lowest value (5 microg/m3) and northern Italy the highest (69 microg/m3). A standardized procedure appropriate for PM2.5 exposure assessment in a multicenter study was developed. We expect ECRHS II to have sufficient variation in exposure to assess long-term effects of air pollution in this cohort. Any bias caused by variation in the characteristics of the chosen monitoring location (e.g., proximity to traffic sources) will be addressed in later analyses. Given the homogenous spatial distribution of PM2.5, however, concentrations measured near traffic are not expected to differ substantially from those measured at urban background sites.