Assessment of semi-natural habitats and landscape features on Irish farmland: New insights to inform EU Common Agricultural Policy implementation

Concerns over the loss of biodiversity and ecosystem services in farmland have prompted the development of agri-environment policy measures aimed at reducing farming pressure and maintaining semi-natural habitats in farmed landscapes. However, further knowledge is needed to guarantee successful agri-environment measures implementation. The current study assessed the quantity and the quality of semi-natural habitats in farms across a gradient of farming intensities in two contrasting regions in Ireland. Policy protection seemed fundamental for semi-natural habitats preservation. Habitats not protected by agricultural policy relied on extensive farming and are in danger of disappearing if they are intensified or abandoned. Due to the lack of policy incentives for habitat quality, no correlations were found between farming intensity and share of semi-natural habitats with habitat quality. Therefore, extensive farming and retention of habitats alone may not reverse the decline of farmland quality and biodiverisity and, thus, measures incentivising the environmental quality may be more successful.Electronic supplementary materialThe online version of this article (10.1007/s13280-020-01344-6) contains supplementary material, which is available to authorized users.     

A comparative study on the raw chitin and chitosan yields of common bio-waste from Philippine seafood

Environmental Science and Pollution Research - Bio-waste materials from aquatic species are alternative sources of chitin and chitosan—high-value natural biodegradable and biocompatible...     

Risks of sea level rise to disadvantaged communities in the United States

Climate change and sea level rise (SLR) pose risks to coastal communities around the world, but societal understanding of the distributional and equity implications of SLR impacts and adaptation actions remains limited. Here, we apply a new analytic tool to identify geographic areas in the contiguous United States that may be more likely to experience disproportionate impacts of SLR, and to determine if and where socially vulnerable populations would bear disproportionate costs of adaptation. We use the Social Vulnerability Index (SoVI) to identify socially vulnerable coastal communities, and combine this with output from a SLR coastal property model that evaluates threats of inundation and the economic efficiency of adaptation approaches to respond to those threats. Results show that under the mid-SLR scenario (66.9 cm by 2100), approximately 1,630,000 people are potentially affected by SLR. Of these, 332,000 (～20%) are among the most socially vulnerable. The analysis also finds that areas of higher social vulnerability are much more likely to be abandoned than protected in response to SLR. This finding is particularly true in the Gulf region of the United States, where over 99% of the most socially vulnerable people live in areas unlikely to be protected from inundation, in stark contrast to the least socially vulnerable group, where only 8% live in areas unlikely to be protected. Our results demonstrate the importance of considering the equity and environmental justice implications of SLR in climate change policy analysis and coastal adaptation planning.     

Modulation-assisted high speed machining of compacted graphite iron (CGI)

The application of controlled, low-frequency modulation (～100 Hz) superimposed onto the cutting process in the feed-direction – modulation-assisted machining (MAM) – is shown to be quite effective in reducing the wear of cubic boron nitride (CBN) tools when machining compacted graphite iron (CGI) at high machining speeds (>500 m/min). The tool life is at least 20 times greater than in conventional machining. This significant reduction in wear is a consequence of the multiple effects realized by MAM, including periodic disruption of the tool–workpiece contact, formation of discrete chips, enhanced fluid action and lower cutting temperatures. The propensity for thermochemical wear of CBN, the principal wear mode at high speeds in CGI machining, is thus reduced. The tool wear in MAM is also found to be smaller at the higher cutting speeds (730 m/min) tested. The feed-direction MAM appears feasible for implementation in industrial machining applications involving high speeds.     

Study of vehicle speeds on a major highway in Ghana: implication for monitoring and control

OBJECTIVE: Vehicular speeds have been identified to be at the core of road accident severity and frequency globally. Whereas speed control is a fundamental priority and the cornerstone of road safety in the developed world, the subject is at rudimentary stages in most developing countries thus making research into vehicle speeds in developing nations imperative. The main aim of the study was to establish two major speed parameters, namely the mean speed and dispersion, and their implications for more extensive and long-term speed monitoring in Ghana. METHODS: Research workers stationed themselves in a parked car and used a radar gun to unobtrusively measure the travelling speeds of 4,163 vehicles over two 24-hour periods at two separate sites on one of the main inter-urban roads (Accra-Kumasi). Both sites were settled areas with posted speed limits of 50 km/hr. RESULTS: Over 95% of vehicles travelled above the posted speed limit of 50 km/hr. Vehicles on an average travelled at 87 km/hr, (95% CI=87, 88). Variation in speeds was wide, with a standard deviation of 18 km/hr for all classes of vehicles, and with a range of 40 to 187 km/hr. The highest vehicular speed was associated with the private car (97.6+/-18.3 km/hr) followed by large buses (93.6+/-13.3 km/hr) and the least was with heavy trucks (73.8+/-12.9 km/hr). CONCLUSION: The excessive vehicular speeds coupled with the wide speed variations explain in part the high incidence of traffic crashes and fatalities on the Accra-Kumasi highway. An integrated speed monitoring and control program, and realigning the highway to by-pass small and medium settlements would be required as a long-term measure for the reduction of speed-related road traffic crashes, fatalities, and injuries in Ghana.     

Anatomical localization and stereoisomeric composition of <Emphasis Type="Italic">Tribolium castaneum</Emphasis> aggregation pheromones

We report that the abdominal epidermis and associated tissues are the predominant sources of male-produced pheromones in the red flour beetle, Tribolium castaneum and, for the first time, describe the stereoisomeric composition of the natural blend of isomers of the aggregation pheromone 4,8-dimethyldecanal (DMD) in this important pest species. Quantitative analyses via gas chromatography–mass spectrometry showed that the average amount of DMD released daily by single feeding males of T. castaneum was 878 ± 72 ng (SE). Analysis of different body parts identified the abdominal epidermis as the major source of aggregation pheromone; the thorax was a minor source, while no DMD was detectable in the head. No internal organs or obvious male-specific glands were associated with pheromone deposition. Complete separation of all four stereoisomers of DMD was achieved following oxidation to the corresponding acid, derivatization with (1R, 2R)- and (1S, 2S)-2-(anthracene-2,3-dicarboximido)cyclohexanol to diastereomeric esters, and their separation on reversed-phase high-performance liquid chromatography at −54°C. Analysis of the hexane eluate from Porapak-Q-collected volatiles from feeding males revealed the presence of all four isomers (4R,8R)/(4R,8S)/(4S,8R)/(4S,8S) at a ratio of approximately 4:4:1:1. A walking orientation bioassay in a wind tunnel with various blends of the four synthetic isomers further indicated that the attractive potency of the reconstituted natural blend of 4:4:1:1 was equivalent to that of the natural pheromone and greater than that of the 1:1 blend of (4R,8R)/(4R,8S) used in commercial lures.     

Examining Trajectories of Change for Prosperous Forest Landscapes in Cambodia

Environmental Management - Tropical forest landscapes are undergoing rapid transition. Rural development aspirations are rising, and land use change is contributing to deforestation, degradation,...     

Hyperspectral Characteristics of Canopy Components and Structure for Phenological Assessment of an Invasive Weed

Spectral reflectance values of four canopy components (stems, buds, opening flowers, and postflowers of yellow starthistle (Centaurea solstitialis)) were measured to describe their spectral characteristics. We then physically combined these canopy components to simulate the flowering stage indicated by accumulated flower ratios (AFR) 10%, 40%, 70%, and 90%, respectively. Spectral dissimilarity and spectral angles were calculated to quantitatively identify spectral differences among canopy components and characteristic patterns of these flowering stages. This study demonstrated the ability of hyperspectral data to characterize canopy components, and identify different flowering stages. Stems had a typical spectral profile of green vegetation, which produced a spectral dissimilarity with three reproduction organs (buds, opening flowers, and postflowers). Quantitative differences between simulated flower stages depended on spectral regions and phenological stages examined. Using full-range canopy spectra, the initial flowering stage could be separated from the early peak, peak, and late flowering stages by three spectral regions, i.e. the blue absorption (around 480 nm) and red absorption (around 650 nm) regions and NIR plateau from 730 nm to 950 nm. For airborne CASI data, only the red absorption region and NIR plateau could be used to identify the flowering stages in the field. This study also revealed that the peak flowering stage was more easily recognized than any of the other three stages.