Book reviews

Making Cities Work: the role of local government in the urban environment. Richard Gilbert, Don Stevenson, Herbert Girardet & Richard Stren, 1996, London, Earthscan, 203pp. ISBN 1 85383 354 1, £13.95 pbk

Environmental Policy in an International Context, Vols 1-3: Perspectives, Conflicts and Prospects. P. Glasbergen & A. Blowers (Series Eds) London, Arnold

Rhetoric and Reality in Environmental Policy. M. Wintle & R. Reeve (Eds), 1994, Aldershot, Avebury Studies in Green Research, 154 pp. ISBN 1 85628 927 3

FutureNatural: Nature, Science, Culture. G. Roberston et al. (Eds) 1996, London, Routledge, ISBN 0415 070139, £40.00 hbk

Environmental Policy with Political Integration: the European Union and the United States. New horizons in environmental economics. John B. Braden, Henk Folmer & Thomas S. Ulen (Eds), 1996, Cheltenham, Elgar Publishing, 477 pp. ISBN 1 85898 217 0     

Paradise Threatened: Land Use and Erosion on St. John, US Virgin Islands

2 /yr, respectively. Geomorphic evidence indicates that plantation agriculture during the 18th and 19th centuries did not cause severe erosion. Since about 1950 there has been rapid growth in roads and development due to increasing tourism and second-home development. Our field investigations identified the approximately 50 km of unpaved roads as the primary source of anthropogenic sediment. Field measurements of the road network in two catchments led to the development of a vector-based GIS model to predict road surface erosion and sediment delivery. We estimate that road erosion has caused at least a fourfold increase in island-wide sediment yields and that current sedimentation rates are unprecedented. Paving the dirt roads and implementing standard sediment control practices can greatly reduce current sediment yields and possible adverse effects on the marine ecosystems surrounding St. John.     

Comparing Environmental Conditions Using Indicators of Pollution Hazard

/ Land use/land cover classifications for 1973 and 1991, derived from the interpretation of satellite imagery, are quantified on the basis of biophysical land units in a study area in southeastern Australia. Nutrient export potentials are estimated for each land unit based on their composition of land use/land cover classes. Spatial and temporal comparisons are made of the land units based on the calculated pollution hazard indicators to provide an insight into changes in the state of the environment and the regional significance of land use changes. For example, one ecosystem, unique to the study, showed a large increase in pollution hazard over the study period as a manifestation of an 11-fold rise in cleared area and an expansion of cropping activities. The benefits to environmental management in general are discussed.KEY WORDS: Land cover change; Nutrient export; Environmental condition; Pollution hazard; Agricultural pollution; Nonpoint source pollution; Diffuse pollution; Environmental degradation     

Quantitative Assessment of the Intertidal Environment of Kuwait I: Integrated Environmental Classification

Quantitative analysis of physical, chemical and biological data of the intertidal zone in Kuwait was undertaken to develop an integrated basis for assessing and protecting this sensitive coastal ecosystem. Cluster analyses were performed to determine the resemblance between the sampling stations based on the sediment composition, the benthic macrofauna and the physico-chemical characteristics of the intertidal sediment/water. Five distinct sub-environments were delineated within the intertidal zone of Kuwait. Each sub-environment was described in terms of number of taxa, mean density of organisms, sediment type, tidal level and dominant organisms. The physico-chemical parameters investigated were found to be unimportant in the distribution of the intertidal benthic macrofauna. On the other hand, sediment type was found to be a major factor in the overall composition of the benthic community. The benthic fauna and related characteristics of the sub-environments could be used as indicators to monitor changes in the intertidal ecosystem and as guides to protection and management of the different coasts. The approach described in this paper could also be adopted elsewhere to provide a sound basis for evaluating environmental impacts and for developing sustainable coastal management.     

Strategic environmental product planning within Philips sound & vision

Until now no structured methodology existed for attuning environmental considerations to the business strategy of companies. The Environmental Competence Centre of Philips Sound & Vision in The Netherlands has developed and tested a methodology for this purpose. This methodology, called Selection of STRrategic Environmen Tal CHallenges (STRETCH), has proven to lead to promising results and should therefore be actively promoted. In this article, the authors show how the application of STRETCH provides the possibility of meeting three main objectives: First, focusing on the incorporation of environmental aspects into the company's business strategy can elicit innovations that may enhance the competitive position of the company by cost reduction and/or higher market shares. Second, the environmental opportunities and threats to be expected in the future can be anticipated in an earlier phase. Through this proactive approach a company can avoid external criticism and take the lead in environmental priority setting. Third, by applying the STRETCH methodology even higher eco-efficiencies are expected to be reached than through incremental, step-by-step environmental improvements.     

NATURAL EROSION RATES AND THEIR PREDICTION IN THE IDAHO BATHOLITH1

ABSTRACT: Natural rates of surface erosion on forested granitic soils in central Idaho were measured in 40 m² bordered erosion plots over a period of four years. In addition, we measured a variety of site variables, soil properties, and summer rainstorm intensities in order to relate erosion rates to site attributes. Median winter erosion rates are approximately twice summer period rates, however mean summer rates are nearly twice winter rates because of infrequent high erosion caused by summer rainstorms. Regression equation models and regression tree models were constructed to explore relationships between erosion and factors that control erosion rates. Ground cover is the single factor that has the greatest influence on erosion rates during both summer and winter periods. Rainstorm intensity (erosivity index) strongly influences summer erosion rates, even on soils with high ground cover percentages. Few summer storms were of sufficient duration and intensity to cause rilling on the plots, and the data set was too small to elucidate differences in rill vs. interrill erosion. The regression tree models are relatively less biased than the regression equations developed, and explained 70 and 84 percent of the variability in summer and winter erosion rates, respectively.     

Incidents in manual handling activities

More than 20000 handling manoeuvres in loading or unloading trailers in a large transportation company were observed. The aim of the study was to determine the frequency and nature of the incidents occurring whilst handling. The incidents were recorded and interpreted from a double perspective, namely as risk factors and as activity regulation factors. The study showed that on average, one incident occurred in every seven handling manoeuvres: 71% of them were related to the environment, and 29% to the activity. While numerous, the environment-related incidents were generally without consequences. In this respect, the activity incidents appeared more risky; also, the majority of these incidents occurred during the load positioning phase. The study also showed that loads are re-handled twice as often in unloading as in loading, the frequency of re-handlings varying widely from one handler to another. The reasons why so few of the observed incidents are reported in accident studies and their significance in the understanding of handling problems are discussed.     

The influence of degree of substitution on blend miscibility and biodegradation of cellulose acetate blends

In this account, we report our findings on blends of cellulose acetate having a degree of substitution (DS) of 2.49 (CA2.5) with a cellulose acetate having a DS of 2.06 (CA2.0). This blend system was examined over the composition range of 0–100% CA2.0 employing both solvent casting of films (no plasticizer) and thermal processing (melt-compressed films and injection molding) using poly(ethylene glycol) as a common plasticizer. All thermally processed blends were optically clear and showed no loss in optical quality after storage for several months. Thermal analysis and measurement of physical properties indicate that blends in the middle composition range are partially miscible, while those at the ends of the composition range are miscible. We suggest that the miscibility of these cellulose acetate blends is influenced primarily by the monomer composition of the copolymers. Bench-scale simulated municipal composting confirmed the biodestructability of these blends and indicated that incorporation of a plasticizer accelerated the composting rates of the blends.In vitro aerobic biodegradation testing involving radiochemical labeling conclusively demonstrated that both the lower DS CA2.0 and the plasticizer significantly enhanced the biodegradation of the more highly substituted CA2.5.While this work was in progress, Robert Gardner was struck with cancer and died on June 6, 1995. This paper is dedicated to his memory and to his contributions as a friend and colleague.     

Analysis of a system for remote, dry removal of solidified mixed waste

This paper describes a novel technology for the removal of solidified radioactive waste from underground storage tanks at the DOE Hanford site in southeast Washington. The process involves the use of a unique high pressure system which pulverizes the hardened saltcake with stainless steel pellets to a powder for easy vacuum removal. The steel pellets can be magnetically separated from the waste material for re-use. Specifically this study analyzes the effects of various steel abrasives, pressure of the air stream, and stand-off distance on removal rates and penetration depth on simulated saltcake samples using the high pressure technique. A full-scale test set-up and protocol were implemented to allow for comprehensive testing. To insure reproducibility of the method, tests were then run for the optimum removal parameters. A time-dependent test was also conducted to determine the relationship of removal rates to length of pressure blasts. The results of these tests revealed that stand-off distance and pressure could be positively correlated to removal volumes. Additionally, a statistical analysis confirmed that nozzle angle is independent of removal rate. This study demonstrated that the pellet ‘blaster’ technique is a safe, effective method for removal of radioactive wastes without any increase in either waste mass or volume.     

In-situ sparging: Mass transfer mechanisms

In-situ sparging has been accepted as a method to rapidly remediate groundwater at considerably lower costs compared to remedies based on groundwater recovery alone. The success of in-situ sparging depends on effective mass transfer between air and contaminated media in the subsurface. Factors affecting mass transfer include advective airflow, diffusive transport, interphase chemical partitioning, and chemical and biological reaction rates between sparged gases and subsurface contaminants, minerals, and naturally occurring organic compounds. Understanding these factors can increase the design efficiency of in-situ sparging and assist in developing sparging systems that use gases other than air (i.e., oxygen, ozone, and methane).