A comparison of techniques to sample salamander assemblages along highland streams of Maryland

Amphibians may be useful indicators of biological condition in small streams so determining which sampling technique maximizes encounters at the least cost and at the optimal time of year is important. Area constrained surveys (ACS), used by the Maryland Biological Stream Survey, were tested against cover board surveys, drift fences with pitfall and funnel traps, quadrat leaf litter searches, and leaf litter bags. Sixteen, 100 m-long sites were established in headwater streams in the Savage River State Forest in Garrett County, Maryland. Each technique was randomly assigned to a 25 m stream section within each overall sampling site, and sites were sampled once each month from May to October (2005) with additional sampling in March and April (2006). Area constrained surveys yielded means of 2.7 taxa and 14.9 total individuals per sampling visit, which was significantly higher than the yield of all other methods in all months except October and March, when yields were low for all techniques. Area constrained surveys were also significantly more cost-effective per taxon and per individual compared to all other methods. September produced the most taxa and individuals, October and March produced the least, and yields for April through August were similar to September. We employed removal sampling at four sites in April 2006, but abundance could not be estimated because a significant linear decrease in the accumulated catch versus catch per unit effort did not occur for three of the sites.     

Development of tiger habitat suitability model using geospatial tools—a case study in Achankmar Wildlife Sanctuary (AMWLS), Chhattisgarh India

Geospatial tools supported by ancillary geo-database and extensive fieldwork regarding the distribution of tiger and its prey in Anchankmar Wildlife Sanctuary (AMWLS) were used to build a tiger habitat suitability model. This consists of a quantitative geographical information system (GIS) based approach using field parameters and spatial thematic information. The estimates of tiger sightings, its prey sighting and predicted distribution with the assistance of contextual environmental data including terrain, road network, settlement and drainage surfaces were used to develop the model. Eight variables in the dataset viz., forest cover type, forest cover density, slope, aspect, altitude, and distance from road, settlement and drainage were seen as suitable proxies and were used as independent variables in the analysis. Principal component analysis and binomial multiple logistic regression were used for statistical treatments of collected habitat parameters from field and independent variables respectively. The assessment showed a strong expert agreement between the predicted and observed suitable areas. A combination of the generated information and published literature was also used while building a habitat suitability map for the tiger. The modeling approach has taken the habitat preference parameters of the tiger and potential distribution of prey species into account. For assessing the potential distribution of prey species, independent suitability models were developed and validated with the ground truth. It is envisaged that inclusion of the prey distribution probability strengthens the model when a key species is under question. The results of the analysis indicate that tiger occur throughout the sanctuary. The results have been found to be an important input as baseline information for population modeling and natural resource management in the wildlife sanctuary. The development and application of similar models can help in better management of the protected areas of national interest.     

Predicting the biological condition of streams: use of geospatial indicators of natural and anthropogenic characteristics of watersheds

We developed and evaluated empirical models to predict biological condition of wadeable streams in a large portion of the eastern USA, with the ultimate goal of prediction for unsampled basins. Previous work had classified (i.e., altered vs. unaltered) the biological condition of 920 streams based on a biological assessment of macroinvertebrate assemblages. Predictor variables were limited to widely available geospatial data, which included land cover, topography, climate, soils, societal infrastructure, and potential hydrologic modification. We compared the accuracy of predictions of biological condition class based on models with continuous and binary responses. We also evaluated the relative importance of specific groups and individual predictor variables, as well as the relationships between the most important predictors and biological condition. Prediction accuracy and the relative importance of predictor variables were different for two subregions for which models were created. Predictive accuracy in the highlands region improved by including predictors that represented both natural and human activities. Riparian land cover and road-stream intersections were the most important predictors. In contrast, predictive accuracy in the lowlands region was best for models limited to predictors representing natural factors, including basin topography and soil properties. Partial dependence plots revealed complex and nonlinear relationships between specific predictors and the probability of biological alteration. We demonstrate a potential application of the model by predicting biological condition in 552 unsampled basins across an ecoregion in southeastern Wisconsin (USA). Estimates of the likelihood of biological condition of unsampled streams could be a valuable tool for screening large numbers of basins to focus targeted monitoring of potentially unaltered or altered stream segments.     

Non-intrusive characterization methods for wastewater-affected groundwater plumes discharging to an alpine lake

Streams and lakes in rocky environments are especially susceptible to nutrient loading from wastewater-affected groundwater plumes. However, the use of invasive techniques such as drilling wells, installing piezometers or seepage meters, to detect and characterize these plumes can be prohibitive. In this work, we report on the use of four non-intrusive methods for this purpose at a site in the Rocky Mountains. The methods included non-invasive geophysical surveys of subsurface electrical conductivity (EC), in-situ EC measurement of discharging groundwater at the lake-sediment interface, shoreline water sampling and nutrient analysis, and shoreline periphyton sampling and analysis of biomass and taxa relative abundance. The geophysical surveys were able to detect and delineate two high-EC plumes, with capacitively coupled ERI (OhmMapper) providing detailed two-dimensional images. In situ measurements at the suspected discharge locations confirmed the presence of high-EC water in the two plumes and corroborated their spatial extent. The nutrient and periphyton results showed that only one of the two high-EC plumes posed a current eutrophication threat, with elevated nitrogen and phosphorus levels, high localized periphyton biomass and major shifts in taxonomic composition to taxa that are commonly associated with anthropogenic nutrient loading. This study highlights the need to use non-intrusive methods in combination, with geophysical and water EC-based methods used for initial detection of wastewater-affected groundwater plumes, and nutrient or periphyton sampling used to characterize their ecological effects.     

Effects of treated sewage sludge levels on temporal variations of some soil properties of a Typic Xerofluvent soil in Menemen Plain, Western Anatolia, Turkey

The aim of this study is to determine effects of treated sewage sludge (TSS) levels as an organic matter (OM) resource on temporal variations of some soil properties of a Typic Xerofluvent soil. The experiment was conducted in Menemen Plain, in the Western Anatolia Region of Turkey (latitudes 38 degrees 34'48.22'-38 degrees 34'49.24' N; longitudes 27 degrees 1'23.05-27 degrees 1'24.14' E) in the years of 2003 and 2004. Moist TSS was added to the soil at the rates of 0, 30, 60 and 90 t ha(-1) on May 1, 2003. Peanut (Arachis hypogaea) was planted as first crop. On the other hand, mixture of green barley (Hordeum vulgare) and common vetch (Vicia sativa L.) was planted as second crop. During the experiment, soil samples were taken in five different periods (1st, June 18, 2003; 2nd, November 13, 2003; 3rd, April 30, 2004; 4th, October 10, 2004 and 5th, May 12, 2004). The results showed that increasing TSS application to Typic Xerofluvent soil was significantly increased total salt, OM, total porosity, micro porosity, macro porosity, field capacity, wilting point, available water content, structure stability index and aggregation percentage values of soil when compared with control. Meanwhile, particle density, dry bulk density and nonaggregated silt + clay values of soil decreased. On the other hand, soil reaction (pH), lime content and total silt + clay values of soil did not significantly change. In the course of time, depending on decomposing of TSS organic materials in soil, effect of TSS levels on soil properties decreased particularly in the last periods. For this reason, it can be recommended that 90 t ha(-1) moist TSS can be added once in 2 years for improving soil properties of Typic Xerofluvent soil, which are characterized by low OM content.     

An appraisal of changes in seasonal water quality during passage through a shallow reservoir in Western Poland

Following restoration changes in Antoninek Reservoir physico-chemical and biological processes in the water column and bottom sediments were measured to outline mechanisms of changes in nitrogen, phosphorus and organic matter concentrations during water flow through this reservoir. Intensive mineralisation of organic matter in the shallow sediments stimulated primary production and influenced increasing ammonia and nitrite nitrogen concentrations. Two main factors affected concentrations of phosphorus: (1) its presence in the external loads of river waters entering the reservoir, more important in the colder seasons as the water discharge was higher and (2) from the internal loads coming from bottom sediments. The quality of the river water during its flow through this reservoir improved for most parameters and seasons. However, concentrations of nutrients were still high in waters flowing out from the reservoir and in some months they were higher in the outflow than in waters entering the reservoir.     

Risk assessment and distribution of soil Pb in Guangdong, China

In this study, the spatial distributions of soil lead (Pb) concentration in three horizontal soils in Guangdong, China, were surveyed and analyzed using geostatistics and geography information systems (GIS). Findings indicated that the Pb geometric mean concentration of 23.3 mg/kg in surface soils was found to be higher than those in global soils, which ranged from 2.3–235 mg/kg. In addition, the Pb geometric mean concentrations from A- to C-horizon were found to be 23.3, 27.2, and 28.6 mg/kg, respectively. The classification of a soil Pb environmental risk in an area was likewise presented based on the different levels of environmental quality of Pb and was done by GIS technology. Accordingly, there is a higher local concentration of Pb in the surrounding areas of Guangzhou where there is higher population density and in the north of Guangdong, which is a historic mining area. The results obtained by the environmental risk assessment reveal that about 46% of total surveyed area was above the background value, that is, 2.7% of the total area was at risk of pollution.     

Contaminants in fish tissue from US lakes and reservoirs: a national probabilistic study

An unequal probability design was used to develop national estimates for 268 persistent, bioaccumulative, and toxic chemicals in fish tissue from lakes and reservoirs of the conterminous United States (excluding the Laurentian Great Lakes and Great Salt Lake). Predator (fillet) and bottom-dweller (whole body) composites were collected from 500 lakes selected randomly from the target population of 147,343 lakes in the lower 48 states. Each of these composite types comprised nationally representative samples whose results were extrapolated to the sampled population of an estimated 76,559 lakes for predators and 46,190 lakes for bottom dwellers. Mercury and PCBs were detected in all fish samples. Dioxins and furans were detected in 81% and 99% of predator and bottom-dweller samples, respectively. Cumulative frequency distributions showed that mercury concentrations exceeded the EPA 300 ppb mercury fish tissue criterion at nearly half of the lakes in the sampled population. Total PCB concentrations exceeded a 12 ppb human health risk-based consumption limit at nearly 17% of lakes, and dioxins and furans exceeded a 0.15 ppt (toxic equivalent or TEQ) risk-based threshold at nearly 8% of lakes in the sampled population. In contrast, 43 target chemicals were not detected in any samples. No detections were reported for nine organophosphate pesticides, one PCB congener, 16 polycyclic aromatic hydrocarbons, or 17 other semivolatile organic chemicals.     

Assessing benthic community condition in Chesapeake Bay: does the use of different benthic indices matter?

Federal and state environmental agencies conduct several programs to characterize the environmental condition of Chesapeake Bay. These programs use different benthic indices and survey designs, and have produced assessments that differ in the estimate of the extent of benthic community degradation in Chesapeake Bay. Provided that the survey designs are unbiased, differences may exist in the ability of these indices to identify environmental degradation. In this study we compared the results of three indices calculated on the same data, and the assessments of two programs: the Chesapeake Bay Program and the Mid-Atlantic Integrated Assessment (MAIA). We examined the level of agreement of index results using site-based measures of agreement, evaluated sampling designs and statistical estimation methods, and tested for significant differences in assessments. Comparison of ratings of individual sites was done within separate categories of water and sediment quality to identify which indices summarize best pollution problems in Chesapeake Bay. The use of different benthic indices by these programs produced assessments that differed significantly in the estimate of degradation. A larger fraction of poor sites was classified as good by the Environmental Monitoring and Assessment Program’s Virginian Province and MAIA benthic indices compared to the Chesapeake Bay benthic index of biotic integrity, although overall classification efficiencies were similar for all indices. Differences in survey design also contributed to differences in assessments. The relative difference between the indices remained the same when they were applied to an independent dataset, suggesting that the indices can be calibrated to produce consistent results.     

Estimation of air pollutant emission loads from construction and operational activities of a port and harbour in Mumbai, India

Port causes environmental and health concerns in coastal cities if its operation and development are not made environmentally compatible and sustainable. An emission inventory is necessary to assess the impact of port projects or growth in marine activity as well as to plan mitigation strategies. In this study, a detailed emission inventory of total suspended particulate (TSP) matter, respirable particulate matter (PM₁₀), sulphur dioxide (SO₂) and oxides of nitrogen (NO_x) for a port having operation and construction activities in parallel is compiled. The study has been done for 1 year. Results show that the maximum contribution of emission of air pollutants in the port area was from TSP (68.5%) and the minimum was from SO₂ (5.3%) to the total pollutants considered in this study. Total TSP emission from all activities of the port was 4,452 tyr^???1 and PM₁₀ emission was 903 tyr^???1 in the year 2006. Re-suspension of dust from paved roads was the major contributor of TSP and PM₁₀ in the road transport sector. Construction activities of the port had contributed 3.9% of TSP and 7.4% of PM₁₀ to total emission of particulate matter. Of the total particulate emissions from various port activities approximately 20% of TSP could be attributed to PM₁₀. The sectoral composition indicates that major contribution of SO₂ emission in the port was from maritime sector and major contribution of NO_x was from road transport sector.