Transfer and accumulation of metals in a soil-diet-wood mouse food chain along a metal pollution gradient

We studied the accumulation and transfer of As, Cd, Cu, Pb and Zn in the compartments of a soil-diet-wood mouse (Apodemus sylvaticus) food chain at five sites located along a metal pollution gradient. We observed a clear gradient in metal exposure at increasing distance from the smelter in all compartments of the food chain for the non-essential metals. The gradient was less clear or absent for the essential metals in acorn and mice target tissues. Regression analysis showed overall strong relationships within the soil-diet and diet-wood mouse compartments for the non-essential metals, while relationships for the essential metals were weak or absent. Total metal in soil appeared as a better predictor for the diet metal content than the available metal fraction. Our results suggest a more important transfer of non-essential elements through the food chain than essential elements, which is probably a consequence of homeostatic control of the latter group.     

Characterization of carbonaceous combustion residues. I. Morphological,elemental and spectroscopic features

Scanning electron microscopy, surface area determination, elemental analysis, organic matter extraction and solid-state cross polarization/magic angle spinning and Bloch decay/magic angle spinning 13C nuclear magnetic resonance (NMR) spectroscopy were used to investigate distinctive features among carbonaceous combustion residues. Black carbon (BC) samples included diesel soot, urban dust, carbon black, chimney soot, vegetation fire residues, wood and straw charcoals. Particles varied from small spheres (<50 nm) in fossil BC (>100 m(2)/g), to large layered structures in plant-derived BC (generally <8 m(2)/g). Chimney soot also included large (>1 micrometer) liquid-like structures, while spherules >100 nm were unique to urban dust. The ratios of amorphous to soot carbon (SC) (isolated by thermal degradation) were not necessarily correlated with the degree of aromaticity estimated from H/C ratios. In particular, values of SC in diesel soot were clearly overestimated. Solvent-extractable organic matter (SEOM) was <2% for charcoals and carbon black, but >13% for urban dust, chimney and diesel soot. SEOM is thought to clog pores or to form large waxy globules, hence reducing surface areas. The ratio of polar/nonpolar SEOM was generally <7 for fossil BC, but >30 for plant-derived BC. NMR analysis revealed essentially one chemical shift in the aromatic C region of charcoals, while diesel soot also showed important aliphatic contributions. Aliphatic and oxygenated C predominated over aryl C in urban dust and chimney soot. These morphological and chemical characteristics of the BC samples are discussed in terms of their environmental implications.     

包头市儿童卧室内醛酮类化合物污染调研

为研究包头市儿童卧室的空气中醛酮类化合物的污染水平及影响因素,2014—2015年在包头市四大城区随机选取了100户家庭,对采集的室内空气进行了12种醛酮类化合物的高效液相色谱检测和分析。本次调研是全国性计划"中国室内环境与儿童健康（CCHH）"的第二阶段。调研结果表明,包头市儿童卧室内主要的醛酮类化合物为甲醛、乙醛、丙醛,采暖季平均值分别为227.04、87.73和53.65 μg·m-3,非采暖季分别为189.17、60.43和40.85 μg·m-3,采暖季浓度高于非采暖季,其中甲醛在采暖季和非采暖季超标率分别为100%和87.5%。采暖季和非采暖季中甲醛和乙醛浓度均与换气次数呈负相关。采暖季和非采暖季中室内较高的相对湿度是甲醛、乙醛和丙醛暴露的危险因素。     

Unpacking pathways to diversified livelihoods from projects in Pacific Island coastal fisheries

Livelihood diversification has become an integral focus of policies and investments aiming to reduce poverty, vulnerability, and pressure on fishery resources in coastal communities around the globe. In this regard, coastal fisheries in the Pacific Islands have long been a sector where livelihood diversification has featured prominently. Yet, despite the widespread promotion and international investment in this strategy, the ability of externally funded livelihood diversification projects to facilitate improved resource management and rural development outcomes often remains inconsistent. We argue these inconsistencies can be attributed to a conceptual ambiguity stemming from a lack of attention and awareness to the complexity of livelihood diversification. There is still much to learn about the process of livelihood diversification, both in its theoretical conceptualizations and its practical applications. Herein, we utilize a common diversity framework to clarify some of this ambiguity by distinguishing three diversification pathways. These pathways are illustrated using an ideal–typical Pacific Island coastal household and supported by examples provided in the literature that detail livelihood diversification projects in the Pacific. Through this perspective, we seek a more nuanced understanding of what is meant within the policy and practice goal of livelihood diversification. Thereby enabling more targeted and deliberate planning for development investments that facilitates outcomes in support of sustainable livelihoods.     

From hanger-on to trendsetter: Decision making on a major safety initiative in a steel company maintenance department

This paper describes a case study of decision making in a steelworks maintenance department, which led to the introduction of a major initiative to improve safety performance. The origin of the decision process lay, however, not with safety, but with an earlier decision to consider outsourcing the maintenance department. When it was decided that this was not feasible a new General Manager was appointed to turn around the performance of the now demoralised department. In his search for solutions and the external developments taking place in parallel he found an initiative which seemed to link his main concerns with a parallel concern for safety improvement. The philosophy behind it and the vision and strategy which was developed to carry it led to a much more participative approach, driven by clearly defined key performance indicators. Safety was chosen as the lead objective. This paper describes the development of the decision process and briefly explains its results.     

Multiple insemination increases reproductive success of female Montandon’s newt (<Emphasis Type="Italic">Triturus montandoni</Emphasis>, Caudata,Salamandridae)

The adaptive significance of multiple matings for females is a matter of much controversy. In insects, supplying the female’s sperm reserves with portions of fresh spermatozoa may be the main function of multiple matings. This simple explanation may also be applied to other animals which produce large numbers of eggs over prolonged periods of time. We tested the fertility insurance hypothesis in Montandon’s newt (Triturus montandoni, Amphibia, Salamandridae). T. montandoni females are inseminated internally by spermatophores they have picked up, and subsequently lay eggs fertilized by spermatozoa released from the spermatheca. We compared the reproductive success of singly and multiply inseminated females of Montandon’s newt in the laboratory. Multiply inseminated females laid more eggs and had a lower percentage of non-developing eggs than females who mated only once. Our data suggest that remating increases the reproductive success of multiply inseminated females by replenishing sperm reserves in the spermatheca or by supplying females with fresh portions of spermatozoa with high fertilizing capacity. Received: 7 January 2000 / Revised: 13 September 2000 / Accepted: 7 October 2000     

Leachate treatment before injection into a bioreactor landfill: Clogging potential reduction and benefits of using methanogenesis

In this study, an anaerobic sequencing batch reactor (ASBR) was operated with leachate from Brady Road Municipal Landfill in Winnipeg, Manitoba, Canada. Leachate was collected twice from the same cell at the landfill, during the first and 70th day of the study, and then fed into the ASBR. The ASBR was seeded at the start-up with biosolids from the anaerobic digester from Winnipeg’s North End Water Pollution Control Center (NEWPCC). Due to the higher COD and VFA removal rates measured with the second batch of leachate, an increase of approximately 0.3 pH units was observed during each cycle (from pH 7.2 to 7.5). In addition, CO₂ was produced between cycles at constant temperature where a fraction of the CO₂ became dissolved, shifting the CO₂/bicarbonate/carbonate equilibrium. Concurrent with the increase in pH and carbonate, an accumulation of fixed suspend solids (FSS) was observed within the ASBR, indicating a buildup of inorganic material over time. From it, Ca²⁺ and Mg²⁺ were measured within the reactor on day 140, indicating that most of the dissolved Ca²⁺ was removed within cycles. There is precedence from past researches of clogging in leachate-collection systems (Rowe et al., 2004) that changes in pH and carbonate content combined with high concentrations of metals such as Ca²⁺ and Mg²⁺ result in carbonate mineral precipitants. A parallel study investigated this observation, indicating that leachate with high concentration of Ca²⁺ under CO₂ saturation conditions can precipitate out CaCO₃ at the pH values obtained between digestion cycles. These studies presented show that methanogenesis of leachate impacts the removal of organic (COD, VFA) as well as inorganic (FSS, Ca²⁺) clog constituents from the leachate, that otherwise will accumulate inside of the recirculation pipe in bioreactor landfills. In addition, a robust methanogenesis of leachate was achieved, averaging rates of 0.35 L CH₄ produced/g COD removed which is similar to the theoretical removal of 0.4 L CH₄/g COD. Therefore, using methanogenesis of leachate prior to recirculation in bioreactor landfills will help to (1) control clog formation within leachate pipes and (2) produce an important additional source of energy on-site.     

Well-designed environmental regulation and firm performance: Swedish evidence on the Porter hypothesis and the effect of regulatory time strategies

Using recent data on a cross-section of Swedish chemical and pulp and paper firms, this paper provides novel empirical insights into the Porter hypothesis. Well-designed environmental regulation can stimulate firms’ innovative capabilities, while at the same time generating innovation offsets that may both offset net compliance costs and yield a competitive edge over those firms that are not affected by such regulations. In doing so, we also test the alleged effectiveness of regulatory time strategies in stimulating innovation activities of regulated firms. We find evidence for the effectiveness of such well-designed regulations: announced rather than existing regulation induces innovation and some innovation offsets. Our results imply that empirical tests of the Porter hypothesis that do not account for its dynamic nature, and that do not measure well-designed regulations, might provide misleading conclusions as to its validity.     

Model for Prioritizing Best Management Practice Implementation: Sediment Load Reduction

Understanding the best way to allocate limited resources is a constant challenge for water quality improvement efforts. The synoptic approach is a tool for geographic prioritization of these efforts. It uses a benefit-cost framework to calculate indices for functional criteria in subunits (watersheds, counties) of a region and then rank the subunits. The synoptic approach was specifically designed to incorporate best professional judgment in cases where information and resources are limited. To date, the synoptic approach has been applied primarily to local or regional wetland restoration prioritization projects. The goal of this work was to develop a synoptic model for prioritizing watersheds within which suites of agricultural best management practices (BMPs) can be implemented to reduce sediment load at the watershed outlets. The model ranks candidate watersheds within an ecoregion or river basin so that BMP implementation within the highest ranked watersheds will result in the most sediment load reduction per conservation dollar invested. The model can be applied anywhere and at many scales provided that the selected suite of BMPs is appropriate for the evaluation area’s biophysical and climatic conditions. The model was specifically developed as a tool for prioritizing BMP implementation efforts in ecoregions containing watersheds associated with the USDA-NRCS conservation effects assessment project (CEAP). This paper presents the testing of the model in the little river experimental watershed (LREW) which is located near Tifton, Georgia, USA and is the CEAP watershed representing the southeastern coastal plain. The application of the model to the LREW demonstrated that the model represents the physical drivers of erosion and sediment loading well. The application also showed that the model is quite responsive to social and economic drivers and is, therefore, best applied at a scale large enough to ensure differences in social and economic drivers across the candidate watersheds. The prioritization model will be used for planning purposes. Its results are visualized as maps which enable resource managers to identify watersheds within which BMP implementation would result in the most water quality improvement per conservation dollar invested.