Heavy metals in brick kiln located area using atomic absorption spectrophotometer: a case study from the city of Peshawar, Pakistan

Environmental pollution is one of the burning issues of the world. In developed countries, there are lot of awareness about the environment and the impact of various industries on their life and surroundings. A little has been done in this direction in developing countries. In Pakistan, a big problem is the rapid conglomeration of the brick kilns in the outskirts of nearly all the urban centers to cope with the rapid construction work in big cities. A huge amount of low-grade coal or rubber tires is used as fuel in a very non-scientific manner. The purpose of the present study was to look into the impact of the brick kilns on the different aspects of environmental pollution caused by these kilns. Concentration of metals Cu, Co, Zn, Pb, Cr, Ni, Cd, and Mn were measured on 36 soil samples collected from the area and the same number of plant samples in order to establish the distribution of heavy metals in the area and to determine the effect of this distribution on the surrounding atmosphere and the possible effects on human life.     

DDT residue in soil and water in and around abandoned DDT manufacturing factory

Dichlorodiphenyltrichloroethane (DDT) belongs to one of the most hazardous groups of chemicals called persistent organic pollutants. Many organochlorine pesticides including p,p(')-DDT are long lasting due to their non-degradability can travel to distant places and being fat soluble can accumulate in animals and human bodies. Due to the persistent nature of p,p(')-DDT, its adverse environmental and health impacts, the present study was undertaken to examine the residual p,p(')-DDT in and around abandoned p,p(')-DDT manufacturing factory in Amman Gharh, Nowshera, NWFP. Samples of soil, sediments and water were collected in and around the factory area, nearby p,p(')-DDT stores, main factory drain leading to river Kabul and nearby villages. Standard procedures were used for the collection, transportation and storage of samples for analyses. Extraction of each sample for p,p(')-DDT analyses was carried out in triplicates using Soxhelt extraction. p,p(')-DDT contents in the samples were analyzed by capillary GC with electron capture detector. Most of the samples collected up to half kilometer distance from the site of the DDT factory were found contaminated. Further the level of p,p(')-DDT decreased with increasing depth from top to bottom and with distance from the site. The results indicate that there is no immediate threat to underground water reservoirs.     

Polychlorinated biphenyls, organochlorine pesticides and polycyclic aromatic hydrocarbons in a one-off global survey of bivalves

During the Danish Galathea 3 expedition, bivalve samples were collected at the Faroe Islands, Greenland, Ghana, South Africa, Australia, Solomon Islands, New Zealand, Chile, US Virgin Islands, Boston, Newfoundland and Shetland Islands and analysed for organochlorines and PAHs. Concentration differences of up to three orders of magnitude were observed, with the highest concentrations at Boston harbour (SPCB 338 ng g(-1) dw, ΣSPAH 5966 ng g(-1) dw) and the Sydney estuary (ΣSPCB 282 ng g(-1) dw, SPAH 1453 ng g(-1) dw). Local impacts were also found for the Greenland capital Nuuk in terms of PCB and PAH levels, while other Greenland samples came closest to representing PAH background levels. Several locations had undetectable organochlorine levels, including Hobart and Chile, which had the lowest SPAH concentrations (<200 ng g(-1) dw). It was possible to group the stations according to their pyrogenic/petrogenic influence using Principal Component Analyses, and indications of petroleum sources were found at Nuuk.     

Effects of Traffic Management and Transport Mode on the Exposure of Schoolchildren to Carbon Monoxide

The exposure to CO of schoolchildren was assessed in the town of Northampton, UK, both by direct measurement and by GIS-based activity modelling. Personal measurement of CO showed that exposures when travelling by car were significantly greater than those when walking, although journey times by car were shorter. However, journey exposures had little effect on maximum 8h mean CO exposures. CO concentration fields in the study area were modelled from current traffic flows, and those expected under different traffic management scenarios. These fields were then used, in combination with children's home and school location, and their activity profiles, to simulate frequency distributions of exposure for different transport modes and traffic management scenarios. The results show a large variability in the effect of traffic management interventions, depending on the child's home and school location.     

Occupational exposure to mould and microbial metabolites during onion sorting—insights into an overlooked workplace

Manual sorting of onions is known to be associated with a bioaerosol exposure. The study aimed to gain an initial indication as to what extent manual sorting of onions is also associated with mycotoxin exposure. Twelve representative samples of outer onion skins from different onion origins were sampled and analyzed with a multimycotoxin method comprising 40 mycotoxins using a single extraction step followed by liquid chromatography with electrospray ionization and triple quadrupole mass spectrometry. Six of the 12 samples were positive for mycotoxins. In those samples, deoxynivalenol, fumonisin B₁, and B₂ were observed in quantitatively detectable amounts of 3940 ng/g for fumonisin B₁ and in the range of 126–587 ng/g for deoxynivalenol and 55–554 ng/g for fumonisin B₂. Although the results point to a lower risk due to mycotoxins, the risk should not be completely neglected and has to be considered in the risk assessment.     

External drift kriging of NOx concentrations with dispersion model output in a reduced air quality monitoring network

In the mid nineteen eighties the Dutch NO_x air quality monitoring network was reduced from 73 to 32 rural and city background stations, leading to higher spatial uncertainties. In this study, several other sources of information are being used to help reduce uncertainties in parameter estimation and spatial mapping. For parameter estimation, we used Bayesian inference. For mapping, we used kriging with external drift (KED) including secondary information from a dispersion model. The methods were applied to atmospheric NO_x concentrations on rural and urban scales. We compared Bayesian estimation with restricted maximum likelihood estimation and KED with universal kriging. As a reference we also included ordinary least squares (OLS). Comparison of several parameter estimation and spatial interpolation methods was done by cross-validation. Bayesian analysis resulted in an error reduction of 10 to 20% as compared to restricted maximum likelihood, whereas KED resulted in an error reduction of 50% as compared to universal kriging. Where observations were sparse, the predictions were substantially improved by inclusion of the dispersion model output and by using available prior information. No major improvement was observed as compared to OLS, the cause presumably being that much good information is contained in the dispersion model output, so that no additional spatial residual random field is required to explain the data. In all, we conclude that reduction in the monitoring network could be compensated by modern geostatistical methods, and that a traditional simple statistical model is of an almost equal quality.

Agrochemical spray drift; assessment and mitigation--a review

During application of agrochemicals spray droplets can drift beyond the intended target to non-target receptors, including water, plants and animals. Factors affecting this spray drift include mode of application, droplet size, which can be modified by the nozzle types, formulation adjuvants, wind direction, wind speed, air stability, relative humidity, temperature and height of released spray relative to the crop canopy. The rate of fall of spray droplets depends upon the size of the droplets but is modified by entrainment in a mobile air mass and is also influenced by the rate of evaporation of the liquid constituting the aerosol. The longer the aerosol remains in the air before falling to the ground (or alternatively striking an object above ground) the greater the opportunity for it to be carried away from its intended target. In general, all size classes of droplets are capable of movement off target, but the smallest are likely to move the farthest before depositing on the ground or a non-target receptor. It is not possible to avoid spray drift completely but it can be minimized by using best-management practices. These include using appropriate nozzle types, shields, spray pressure, volumes per area sprayed, tractor speed and only spraying when climatic conditions are suitable. Field layout can also influence spray drift, whilst crop-free and spray-free buffer zones and windbreak crops can also have a mitigating effect. Various models are available to estimate the environmental exposure from spray drift at the time of application.