Direct measurement of fugitive emissions of hydrocarbons from a refinery

Refineries are a source of emissions of volatile hydrocarbons that contribute to the formation of smog and ozone. Fugitive emissions of hydrocarbons are difficult to measure and quantify. Currently these emissions are estimated based on standard emission factors for the type and use of equipment installed. Differential absorption light detection and ranging (DIAL) can remotely measure concentration profiles of hydrocarbons in the atmosphere up to several hundred meters from the instrument. When combined with wind speed and direction, downwind vertical DIAL scans can be used to calculate mass fluxes of the measured gas leaving the site. Using a mobile DIAL unit, a survey was completed at a Canadian refinery to quantify fugitive emissions of methane, C2+ hydrocarbons, and benzene and to apportion the hydrocarbon emissions to the various areas of the refinery. Refinery fugitive emissions as measured with DIAL during this demonstration study were 1240 kg/hr of C2+ hydrocarbons, 300 kg/hr of methane, and 5 kg/hr of benzene. Storage tanks accounted for over 50% of the total emissions of C2+ hydrocarbons and benzene. The coker area and cooling towers were also significant sources. The C2+ hydrocarbons emissions measured during the demonstration amounted to 0.17% of the mass of the refinery hydrocarbon throughput for that period. If the same loss were repeated throughout the year, the lost product would represent a value of US$3.1 million/yr (assuming US$40/bbl). The DIAL-measured hourly emissions of C2+ hydrocarbons were 15 times higher than the emission factor estimates and gave a different perspective on which areas of the refinery were the main source of emissions. Methods, such as DIAL, that can directly measure fugitive emissions would improve the effectiveness of efforts to reduce emissions, quantify the reduction in emissions, and improve the accuracy of emissions data that are reported to regulators and the public.     

Status and prospects of pay-as-you-throw in Europe - a review of pilot research and implementation studies

Over the past 20 years, significant advances have been made in developing efficient schemes to charge households for their actual waste generation. Viable fee models and technical solutions which are applicable to different environments and provide waste generators with individual incentives for waste diversion efforts have increased the recognition of pay-as-you-throw (PAYT) as an effective instrument for recycling-oriented waste management and financing. On this basis, PAYT has become a practical reality in an increasing number of countries in Europe. Even countries with traditional reservations for direct charging have started to make consideration of PAYT in the revision of their national policy programmes. A situational analysis performed at the European level showed that detailed insights regarding the concrete reactions, red flags and wider benefits inherent to such scheme may still have to be further dispersed in order to overcome the caveats on PAYT and eventually adopt the approach on a larger scale. Claims that the results of PAYT applications are only local in meaning can be disproved as many of the developments bear universal character and can be verified even for larger territories using such schemes in different ways. Including results from an international research co-operation and comparative studies conducted in Germany, this article examines the state-of-the-art of PAYT and shades light onto some of the generally observed implications of its implementation. In conclusion, an outlook on the further potentials and propagation of this scheme is given.     

Sorption kinetics and its effects on retention and leaching.

Sorption of pesticides to substrates used in biopurification systems is important as it controls the system's efficiency. Ideally, pesticide sorption should occur fast so that leaching of the pesticide in the biopurification system is minimized. Although modeling of pesticide transport commonly assumes equilibrium, this may not always be true in practice. Sorption kinetics have to be taken into account. This study investigated the batch sorption kinetics of linuron, isoproturon, metalaxyl, isoxaben and lenacil on substrates commonly used in a biopurification system, i.e. cow manure, straw, willow chopping, sandy loam soil, coconut chips, garden waste compost and peat mix. The first-order sorption kinetics model was fitted to the observed pesticide concentrations versus time resulting in an estimated kinetic rate constant alpha. Sorption appeared to be fast for the pesticides linuron and isoxaben, pesticides which were classified as immobile, while less mobile pesticides displayed an overall slower sorption. However, the substrate does not seem to be the main parameter influencing the sorption kinetics. Coconut chips, which is a substrate with a high organic matter content showed slow sorption for most of the pesticides. The effect of different estimated alpha values on the breakthrough of pesticides through a biopurification system was evaluated using the HYDRUS 1D model. Significant differences in leaching behavior were observed as a result of the obtained differences in sorption kinetics.     

Linking Hydrologic Alteration to Biological Impairment in Urbanizing Streams of the Puget Lowland,Washington, USA1

Abstract: We used a retrospective approach to identify hydrologic metrics with the greatest potential for ecological relevance for use as resource management tools (i.e., hydrologic indicators) in rapidly urbanizing basins of the Puget Lowland. We proposed four criteria for identifying useful hydrologic indicators: (1) sensitive to urbanization consistent with expected hydrologic response, (2) demonstrate statistically significant trends in urbanizing basins (and not in undeveloped basins), (3) be correlated with measures of biological response to urbanization, and (4) be relatively insensitive to potentially confounding variables like basin area. Data utilized in the analysis included gauged flow and benthic macroinvertebrate data collected at 16 locations in 11 King County stream basins. Fifteen hydrologic metrics were calculated from daily average flow data and the Pacific Northwest Benthic Index of Biological Integrity (B‐IBI) was used to represent the gradient of response of stream macroinvertebrates to urbanization. Urbanization was represented by percent Total Impervious Area (%TIA) and percent urban land cover (%Urban). We found eight hydrologic metrics that were significantly correlated with B‐IBI scores (Low Pulse Count and Duration; High Pulse Count, Duration, and Range; Flow Reversals, T_Qmean, and R‐B Index). Although there appeared to be a great deal of redundancy among these metrics with respect to their response to urbanization, only two of the metrics tested – High Pulse Count and High Pulse Range – best met all four criteria we established for selecting hydrologic indicators. The increase in these high pulse metrics with respect to urbanization is the result of an increase in winter high pulses and the occurrence of high pulse events during summer (increasing the frequency and range of high pulses), when practically none would have occurred prior to development. We performed an initial evaluation of the usefulness of our hydrologic indicators by calculating and comparing hydrologic metrics derived from continuous hydrologic simulations of selected basin management alternatives for Miller Creek, one of the most highly urbanized basins used in our study. We found that the preferred basin management alternative appeared to be effective in restoring some flow metrics close to simulated fully forested conditions (e.g., T_Qmean), but less effective in restoring other metrics such as High Pulse Count and Range. If future research continues to support our hypothesis that the flow regime, particularly High Pulse Count and Range, is an important control of biotic integrity in Puget Lowland streams, it would have significant implications for stormwater management.     

Is colloid-facilitated phosphorus leaching triggered by phosphorus accumulation in sandy soils?

The leaching of colloidal phosphorus (P(coll)) contributes to P losses from agricultural soils. In an irrigation experiment with undisturbed soil columns, we investigated whether the accumulation of P in soils due to excess P additions enhances the leaching of colloids and P(coll) from sandy soils. Furthermore, we hypothesized that large concentrations of P(coll) occur at the onset of leaching events and that P(coll) mobilized from topsoils is retained in subsoils. Soil columns of different P saturation and depth (0-25 and 0-40 cm) were collected at a former disposal site for liquid manure and at the Thyrow fertilization experiment in northeastern Germany. Concentrations of total dissolved P, P(coll), Fe(coll), Al(coll), optical density, zeta potential, pH, and electrical conductivity of the leachates were determined. Colloidal P concentrations ranged from 0.46 to 10 micromol L(-1) and contributed between 1 and 37% to total P leaching. Large P(coll) concentrations leached from the P-rich soil of the manure disposal site were rather related to a large P-content of colloids than to the mobilization of additional colloids. Concentrations of colloids and P(coll) in leachates from P-poor and P-rich columns from Thyrow did not differ significantly. In contrast, accumulation of P in the Werbellin and the Thyrow soil consistently increased dissolved P concentrations to maximum values as high as 300 micromol L(-1). We observed no first-flush of colloids and P(coll) at the beginning of the leaching event. Concentrations of P(coll) leached from 40-cm soil columns were not smaller than those leached from 25-cm columns. Our results illustrate that an accumulation of P in sandy soils does not necessarily lead to an enhanced leaching of colloids and P(coll), because a multitude of factors independent from the P status of soils control the mobility of colloids. In contrast, P accumulation generally increases dissolved P concentrations in noncalcareous soils due to the saturation of the P sorption capacity. This indicates that leaching of dissolved P might be a more widespread environmental problem in areas with P-saturated sandy soils than leaching of P(coll).     

Do wood mice (Apodemus sylvaticus L.) use food selection as a means to reduce heavy metal intake?

Food preference of wood mice from two with heavy metals polluted sites and two unpolluted sites was tested under laboratory and field conditions with two-way choice experiments. In the laboratory, wood mice preferred to eat acorns from unpolluted sites over acorns from polluted sites. Previous experience with polluted food had no influence on food choice. Preference was negatively related to acorn metal content. Furthermore, the nutrient content of the acorn endosperm was consistently lower in polluted sites. We therefore conclude that wood mice used absolute metal concentration in the acorn, nutrient content, or both as a food selection cue. The results of the laboratory experiment could not be confirmed under field conditions. We hypothesized that search time constraints due to the presence of predators, competitors and/or other stress factors in the field have prevented the mice to forage selectively.     

Brominated flame retardants and other organochlorine pollutants in human adipose tissue samples from the Czech Republic

Brominated flame retardants (BFRs) represented by polybrominated diphenyl ethers (PBDEs) and hexabromocyclododecane (HBCD) together with major persistent organochlorine pollutants, polychlorinated biphenyls (PCBs) and selected organochlorine pesticides (OCPs), were determined in adipose tissue samples (n=98) obtained by liposuction of Czech subjects. Compared to other organochlorine pollutants (mostly PCBs and DDTs), levels of PBDE were lower by 2 orders of magnitude ranging from 0.2 to 54.3 ng/g lipid weight. PBDE congeners No. 47, 99, 153 and 183 were the most abundant constituting up to 90% of these pollutants in adipose tissue. The PBDEs content measured in this study was comparable with data reported in similar samples collected in Spain, Sweden, Belgium and Japan, whilst slightly lower than in the United States. Regarding PCBs, the dominating congeners were No. 138, 153 and 180 representing up to 90% of indicator congeners. The levels of PCBs were similar to those found in other European countries. While no age dependency was found for PBDEs, an increase of PCB and OCP levels with age was observed. Different exposure routes of donors were documented by the absence of the relationship between PCBs and OCPs.     

Global temperature change from the transport sectors: Historical development and future scenarios

Transport affects climate directly and indirectly through mechanisms that operate on very different timescales and cause both warming and cooling. We calculate contributions to the historical development in global mean temperature for the main transport sectors (road transport, aviation, shipping and rail) based on estimates of historical emissions and by applying knowledge about the various forcing mechanisms from detailed studies. We also calculate the development in future global mean temperature for four transport scenarios consistent with the IPCC SRES scenarios, one mitigation scenario and one sensitivity test scenario. There are large differences between the transport sectors in terms of sign and magnitude of temperature effects and with respect to the contributions from the long- and short-lived components. Since pre-industrial times, we calculate that transport in total has contributed 9% of total net man-made warming in the year 2000. The dominating contributor to warming is CO₂, followed by tropospheric O₃. By sector, road transport is the largest contributor; 11% of the warming in 2000 is due to this sector. Likewise, aviation has contributed 4% and rail ～1%. Shipping, on the other hand, has caused a net cooling up to year 2000, with a contribution of ?7%, due to the effects of SO₂ and NOx emissions. The total net contribution from the transport sectors to total man-made warming is ～15% in 2050, and reaches 20% in 2100 in the A1 and B1 scenarios. For all scenarios and throughout the century, road transport is the dominating contributor to warming. Due to the anticipated reduction in sulphur content of fuels, the net effect of shipping changes from cooling to warming by the end of the century. Significant uncertainties are related to the estimates of historical and future net warming mainly due to cirrus, contrails and aerosol effects, as well as uncertainty in climate sensitivity.     

多氯联苯降解菌Pcb6所含质粒的某些特性的研究

研究证明,某些土壤微生物可以分解多氯联苯(PCBs)。笔者也曾报道过几株能够降解PCBs的细菌。细菌降解质粒可赋予细菌分解代谢各种复杂有机化合物的能力。Kamp和Furukawa等曾分别发现了能够将4-氯联苯和3,5-二氯联苯转化成对应的氯苯甲酸的质粒。 Pseudo monas.sp.Pcb6是一株含有质粒的PCBs降解菌,它对4-PCB、PCB-42、PCB-48和Aroclor1254降解效果显著,并具有明显的脱氯作用。本实验对该质粒的某些生物学特性进行了研究。