Home based workers at risk: Outworkers and occupational health and safety

Outwork is work done for payment at, about or from home. Outworkers generally work under conditions which are less favourable that those of their counterparts doing similar work ‘on site’. There are significant occupational health and safety issues associated with outwork. Terms and conditions of work (e.g. rate of pay, hours of work, degree of worker control over the work process, legislative coverage etc.) will significantly influence health and safety outcomes for outworkers. The paper addresses these more general issues as well as detailing specific workplace hazards and injuries, and other health impacts arising from the work.     

Dialdehyde starch and zein plastic: Mechanical properties and biodegradability

Dialdehyde starch (DAS) and zein, a hydrophobic corn protein, were investigated to produce biodegradable plastics with improved water resistance and mechanical properties. In the study, dialdehyde starch and zein ratio, plasticizers, and degree of starch oxidation were examined. Increased molding temperature and level of starch oxidation decreased water absorption of the plastic. Tensile strength and Young's modulus increased with starch oxidation. The biodegradation of starting materials and ground plastic specimens was studied in aerobic soil reactors maintained at 25°C for 180 days. Biodegradation of corn starch, zein, and dialdehyde starch for 180 days produced CO₂ equivalent to 64, 63, and 10% of theoretical carbon, respectively. Specimens of molded DAS and zein (3 : 1) plastic showed accelerated CO₂ evolution compared to DAS and other raw materials alone. By 180 days, specimens made with starch of low oxidation (1 and 5% oxidized) demonstrated a 60% biodegradation, and specimens with highly oxidized starch (90% oxidized) achieved 37% biodegradation.Paper presented at the Bio/Environmentally Degradable Polymer Society—Third National Meeting, June 6–8, 1994, Boston, Massachusetts.Journal Paper J-15927 of the Iowa Agriculture and Home Economics Experiment Station, Ames, Project No. 3258.     

Environmental monitoring of carbaryl applied in urban areas to control the glassy-winged sharpshooter in California

Carbaryl insecticide was applied by ground spray to plants in urban areas to control a serious insect pest the glassy-winged sharpshooter, Homalodisca coagulata (Say), newly introduced inCalifornia. To assure there are no adverse impacts to human health and the environment from the carbaryl applications, carbaryl was monitored in tank mixtures, air, surface water, foliage and backyard fruits and vegetables.Results from the five urban areas – Porterville, Fresno, Rancho Cordova, Brentwood and Chico – showed there were no significanthuman exposures or impacts on the environment. Spray tank concentrations ranged from 0.1–0.32%. Carbaryl concentrationsin air ranged from none detected to 1.12 g m^-3, well below the interim health screening level in air of 51.7 g m^-3. There were three detections of carbaryl in surface water nearapplication sites: 0.125 ppb (parts per billion) from a water treatment basin; 6.94 ppb from a gold fish pond; and 1737 ppbin a rain runoff sample collected from a drain adjacent to a sprayed site. The foliar dislodgeable residues ranged from 1.54–7.12 g cm^-2, comparable to levels reported forsafe reentry of 2.4 to 5.6 g cm^-2 for citrus. Carbarylconcentrations in fruits and vegetables ranged from no detectableamounts to 7.56 ppm, which were below the U.S.EPA tolerance, allowable residue of 10 ppm.     

Processing and Physical Properties of Plastics Made from Soy Protein Polyester Blends

Blending soy protein with polyesters using a polyvinyllactam as a compatibilizer successfully made soy protein-based plastics. The polyesters used to produce blends included polycaprolactone (PCL) and Biomax (a commercial biodegradable polyester). The blends were processed by compounding extrusion and injection molding. Blends containing soy protein/Biomax-poly(vinyl alcohol) had tensile strengths ranging from 16–22 MPa, with samples containing larger percentages of the synthetic polymer exhibiting greater strengths. Blends made from soy protein, Biomax, and PCL had tensile strengths ranging from 27–33 MPa. All the blends had high Young's moduli but demonstrated brittle characteristics as evident from their low elongations at break, ranging from 1.8–3.1%. Plastics made from soy protein/polyester blends exhibited low water absorption and had good stability under ambient conditions relative to the plastics made from soy protein alone. Blends made from soy protein flour produced plastics with the lowest water absorption.     

“Killing them with kindness”? A study of service employees' responses to uncivil customers

Experiencing uncivil customers is a frequent reality for many people working in the service industry. Past research has established that dealing with uncivil customers can be distressing for employees and can sometimes lead them to engage in reciprocal, discourteous behavior. The purpose of our research is to delve deeper into the experience of customer incivility from the perspective of service employees in order to better understand the various ways in which they respond to customer incivility. We conducted 64 interviews with service employees across an array of occupations and developed a typology of responses to customer incivility. These responses fell into four categories based on the extent to which service employees' actions were intended to promote social harmony (and therefore could broadly be considered civil or uncivil), as well as their perceived agency in the situation. We describe how each response was associated with different interpersonal and intrapersonal consequences and explain the implications of our typology for management theory and practice.     

Managing Sustainable Development Conflicts: The Impact of Stakeholders in Small-Scale Hydropower Schemes

The growing importance of the environment and its management has simultaneously emphasized the benefits of hydroelectric power and its environmental costs. In a changing policy climate, giving importance to renewable energy development and environmental protection, conflict potential between stakeholders is considerable. Navigation of conflict determines the scheme constructed, making sustainable hydropower a function of human choice. To meet the needs of practitioners, greater understanding of stakeholder conflict is needed. This paper presents an approach to illustrate the challenges that face small-scale hydropower development as perceived by the stakeholders involved, and how they influence decision-making. Using Gordleton Mill, Hampshire (UK), as an illustrative case, soft systems methodology, a systems modeling approach, was adopted. Through individual interviews, a range of problems were identified and conceptually modeled. Stakeholder bias towards favoring economic appraisal over intangible social and environmental aspects was identified; costs appeared more influential than profit. Conceptual evaluation of the requirements to meet a stakeholder-approved solution suggested a complex linear systems approach, considerably different from the real-life situation. The stakeholders introduced bias to problem definition by transferring self-perceived issues onto the project owner. Application of soft systems methodology caused a shift in project goals away from further investigation towards consideration of project suitability. The challenge of sustainable hydropower is global, with a need to balance environmental, economic, and social concerns. It is clear that in this type of conflict, an individual can significantly influence outcomes; highlighting the need for more structured approaches to deal with stakeholder conflicts in sustainable hydropower development.     

民航与环境

国际民航组织(ICAO)理事会的航空环境保护委员会(cAEP)提出了与民航有关的主要的环境问题:飞机噪音和来自飞机发动机的排放.在源头减少飞机的噪音是CAEP的工作重点,但是消除噪声和土地利用计划也受到相当大的注意.有关排放的工作可分为三类:技术和标准、管理措施和基于市场的机制.国际民航组织通过技术合作和培训计划给一些国家提供与环境有关的帮助.     

Screening and prioritisation of chemical risks from metal mining operations, identifying exposure media of concern

Metals have been central to the development of human civilisation from the Bronze Age to modern times, although in the past, metal mining and smelting have been the cause of serious environmental pollution with the potential to harm human health. Despite problems from artisanal mining in some developing countries, modern mining to Western standards now uses the best available mining technology combined with environmental monitoring, mitigation and remediation measures to limit emissions to the environment. This paper develops risk screening and prioritisation methods previously used for contaminated land on military and civilian sites and engineering systems for the analysis and prioritisation of chemical risks from modern metal mining operations. It uses hierarchical holographic modelling and multi-criteria decision making to analyse and prioritise the risks from potentially hazardous inorganic chemical substances released by mining operations. A case study of an active platinum group metals mine in South Africa is used to demonstrate the potential of the method. This risk-based methodology for identifying, filtering and ranking mining-related environmental and human health risks can be used to identify exposure media of greatest concern to inform risk management. It also provides a practical decision-making tool for mine acquisition and helps to communicate risk to all members of mining operation teams.     

Do national advisories serve local consumers: an assessment of mercury in economically important North Carolina fish

Consumption of marine fish provides both benefits (lean protein, omega-3 fatty acids and essential nutrients) and risks (main source of mercury (Hg) exposure for humans). Mercury is a potent neurotoxin and the source of more fish advisories nationwide than any other toxicant. Despite the widespread nature of Hg, it is unknown whether local Hg contamination reflects national and regional levels often used as bases to inform consumers of potential fish consumption risk. Thus, the objectives of our study were to examine Hg levels of six commonly consumed marine species harvested locally off the North Carolina coast and to compare our results to published regional (Monterey Bay Aquarium's Seafood Watch List) and national (Environmental Protection Agency, EPA, and Food and Drug Administration, FDA) Hg averages, action levels, and guidelines. We found significant differences in Hg concentrations among collected species, and we identified correlations between Hg concentration and fish length and trophic levels. Collected mahi mahi and triggerfish were below the EPA fish tissue action level (0.3ppm). Wahoo and grouper exceeded the EPA action level but were below the FDA action level (1.0ppm). King mackerel had the highest Hg concentration among targeted species, exceeding both EPA and FDA action levels. Further, our local results were not always consistent with calculated averages from EPA and FDA databases for the same species, and although many of our findings were consistent with Monterey Bay Aquarium's Seafood Watch List (southeast region), recommendations based on Hg levels would conflict with recommendations they provide based on sustainability. We find regional and national averages are not always reflective of local Hg contamination and suggest local data may be needed to accurately assess consumer risk.     

Biological responses to sediment remediation based on thin layer placement near a former pulp mill in Ward Cove, AK (USA)

In 2001, 28 acres of the bottom of Ward Cove, AK (USA) were remediated using thin layer placement, to enhance the natural recovery of contaminated sediments. The remediated areas were part of an 80-acre area of concern identified offshore from the site of a former sulfite pulp mill. The primary chemicals of concern were those commonly associated with organic enrichment near pulp mills: ammonia and 4-methylphenol. The primary remedial objectives were to reduce the toxicity of the contaminated sediments and to stimulate colonization of the remediated areas by benthic macroinvertebrates. In 2004, the initial monitoring event for the remediated areas was conducted, and included evaluations of physical/chemical sediment variables (i.e., total organic carbon, grain size distribution, ammonia, and 4-methylphenol), sediment toxicity (i.e., using the 10-day amphipod survival test with Eohaustorius estuarius), and in situ benthic macroinvertebrate communities. Results of the monitoring event showed that conditions in the remediated areas had improved considerably in the 3 years since thin layer placement had occurred. At most stations, concentrations of both ammonia and 4-methylphenol were very low, and amphipod survival was >or=90%. In addition, benthic macroinvertebrates appeared to be rapidly colonizing the remediated areas, based on evaluations of several community metrics (i.e., taxa richness, diversity, and dominance), as well as key indicator species of organic enrichment and associated transitional areas (i.e., primarily the polychaetes Capitella capitata and Nephtys cornuta, and the bivalve molluscs Axinopsida serricata and Parvilucina tenuisculpta). In general, colonization was consistent with the patterns identified for areas recovering from organic enrichment on the continental shelf of southern California and elsewhere. Based on these results, thin layer placement was considered successful in enhancing the natural recovery of the remediated sediments in Ward Cove.