Seasonal flux of nonylphenol in Han River, Korea

In order to understand the behavior of nonylphenol (NP) in Han River, water, suspended particle and sediment samples were analyzed during summer, autumn and winter. Concentrations of nonylphenol in water ranged from 23.2 to 187.6 ng/l, in suspended particle from 6.8 to 190.8 ng/l and in sediment from 25.4 to 932.0 ng/gdrywt. An increasing trend in the concentration is noticed in all matrices along down the river. In case of water and suspended particle, concentrations were higher in warmer season than in colder season. Percentage of nonylphenol in the suspended particle phase decreased from 67% to 28% with decreasing temperature in water. A reasonable correlation (R2 = 0.63) was obtained for water and suspended particle. The partition coefficient Log Kp is 4.8. No seasonal variation of the concentration in sediment is noticed in this study.     

A numerical simulation model of cyclic hardening behavior of AC4C-T6 for LNG cargo pump using finite element analysis

This paper is concerned with the evaluation of cyclic hardening models within the stress–strain behavior of aluminum alloy AC4C-T6 that can be used to LNG cargo pump operating in cryogenic temperature. To insure the strength assessment of LNG cargo pump, material model of cyclic hardening and plasticity for aluminum alloy AC4C-T6 is investigated through FEA (Finite Element Analysis) with various hardening options including linear and non-linear hardening, isotropic and kinematic hardening, and combined hardening model. Monotonic tensile and cyclic tensile experiments for AC4C-T6 alloy were performed at room temperature and temperature of ?165 °C. Parameters of each hardening model are obtained from the experimental data; thus five hardening models are numerically simulated thereafter. Appropriate hardening models which describe the cyclic stress–strain relationship are investigated through the simulations of cyclic hardening behavior by FEA. In order to verify the predicted behavior of cyclic hardening obtained by FEA, the results of FEA and those measured by experiments are compared.     

Nontarget screening using passive air and water sampling with a level Ⅱ fugacity model to identify unregulated environmental contaminants

It is thought that there are many unregulated anthropogenic chemicals in the environment.For risk assessment of chemicals, it is essential to estimate the predicted environmental concentrations. As an effort of identifying residual organic contaminants in air and water in Korea, nontarget screening using two-dimensional gas chromatography time-of-flight mass spectrometry(GC × GC-TOFMS) was conducted at 10 sites using polyurethane foam passive air sampler and at 6 sites using polydimethyl siloxane(PDMS) passive water sampler in three different seasons in 2014. More than 600 chemical peaks were identified satisfying the identification criteria in air and water samples, respectively, providing a list for further investigation. Chemical substances with reported national emission rates in2014(n = 149) were also screened for potential existence in the environment using a level Ⅱ fugacity model. Most of chemical substances classified as not detectable were not identified with detection frequency greater than 20% by nontarget screening, indicating that a simple equilibrium model has a strong potential to be used to exclude chemicals that are not likely to remain in the environment after emissions from targeted monitoring.     

典型城市臭氧污染源贡献及控制策略费效评估

东莞是珠三角O_3污染最严重的城市,使用RSM/CMAQ(曲面响应模型)法分析了珠三角区域人为排放的NO_x和VOCs对东莞市O_3浓度变化源贡献.2014基准年分析结果表明,扣除模型域外区域传输及天然源排放对O_3本底浓度贡献(41.00%)后,东莞本地VOCs排放对O_3贡献最大(18.50%),珠三角区域NO_x减排率13%时可持续降低东莞市O_3浓度.进一步使用ABa CAS-SE(空气污染控制成本效益与达标评估系统)对2017、2020、2025东莞市3个未来年O_3污染控制情景进行了费效评估.评估结果显示,NO_x和VOCs控制比例相对较低的2017年控制情景人体健康效益/区域控制成本比约为1.1;而控制比例相对较高的2025年东莞O_3达标情景效益成本比仅为0.1.这说明,在高减排率情景下,以末端治理为主的控制措施经济可行性较差,需综合采取产业/能源结构调整、清洁生产等措施实现NO_x和VOCs的大比例减排,实现东莞O_3的稳定达标.今后将进一步研究NO_x和VOCs减排对PM_(2.5)环境浓度及健康效益影响,开展多目标污染物协同控制费效评估.     

Natural attenuation of arsenic in the wetland system around abandoned mining area

Mechanisms of natural attenuation of arsenic (As) by wetland plants may be classified by plant uptake and adsorption and/or co-precipitation by iron (oxy)hydroxide formed on the root surface of plants or in rhizosediment. A natural Cattail (Typha spp.) wetland impacted by tailings containing high levels of As from the Myungbong abandoned Au Mine, South Korea was selected, and the practical capability of this wetland to attenuate As was evaluated. The As concentrations in the plant tissues from the study wetland were several-fold higher than those from control wetland. SEM-EDX analyses demonstrated that iron plaques exist on the rhizome surface. Moreover, relatively high As contents bonded with hydrous iron oxides were found in the rhizosediments rather than in the bulk sediments. It was revealed through the leaching and sequential extraction analyses that As existed as more stable forms in the wetland sediment compared with adjacent paddy soil, which is also contaminated with As due to input of mine tailings. The As concentration ratios of extracted solution to sediment/soil represented that the wetland sediment showed significant lower values (10-fold) rather than the paddy soil with indicating high As stability. Also, As in the wetland sediment was predominantly bonded with residual phases on the basis of results from sequential extraction analysis. From these results, it is concluded that transformation of As contaminated agricultural field to wetland environment may be helpful for natural attenuation until active remediation action.     

Potential application of sludge produced from coal mine drainage treatment for removing Zn(II) in an aqueous phase

Various analyses of physico-chemical characteristics and batch tests were conducted with the sludge obtained from a full-scale electrolysis facility for treating coal mine drainage in order to find the applicability of sludge as a material for removing Zn(II) in an aqueous phase. The physico-chemical analysis results indicated that coal mine drainage sludge (CMDS) had a high specific surface area and also satisfied the standard of toxicity characteristic leaching procedure (TCLP) because the extracted concentrations of certain toxic elements such as Pb, Cu, As, Hg, Zn, and Ni were much less than their regulatory limits. The results of X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) showed that the CMDS mainly consists of goethite (70%) and calcite (30%) as a weight basis. However, the zeta potential analysis represented that the CMDS had a lower isoelectric point of pH (pH_IEP) than that of goethite or calcite. This might have been caused by the complexation of negatively charged anions, especially sulfate, which usually exists with a high concentration in coal mine drainage. The results of Fourier transform infrared (FT-IR) spectrometry analysis revealed that Zn(II) was dominantly removed as a form of precipitation by calcite, such as smithsonite [ZnCO₃] or hydrozincite [Zn₅(CO₃)₂(OH)₆]. Recycling sludge, originally a waste material, for the removal process of Zn(II), as well as other heavy metals, could be beneficial due to its high and speedy removal capability and low economic costs.     

Application of powdered activated carbon coating to fabrics in a hybrid filter to enhance mercury removal

Elemental mercury(Hg0) is predominant constituent of flue gas emitted from coal-fired power plants. Adsorption has been considered the best available technology for removal of Hg0 from flue gas. However, adsorbent injection increases the amount of ash generated. In the present study, powdered activated carbon(PAC) was coated on polytetrafluoroethylene/glass fiber filters to increase Hg0 removal while concurrently reducing the amount of ash generated. The optimal PAC coating rate was determined in laboratory experiments to ensure better Hg0 removal with low pressure drop. When PAC of particle size less than 45 μm was used, and the areal density was 50 g/m2, the pressure drop remained under 30 Pa while the Hg0 removal efficiency increased to 15.8% from4.3%. The Hg0 removal efficiency also increased with decrease in filtration velocity. The optimal PAC coating rate was applied on a hybrid filter(HF), which was combined with a bag filter and an electrostatic precipitator in a single chamber. Originally designed to remove fine particulates matter, it was retrofitted to the flue gas control device for simultaneous Hg0 removal. By employing the PAC coating, the Hg removal efficiency of the HF increased to 79.79% from 66.35%. Also, a temporary reduction in Hg removal was seen but this was resolved following a cleaning cycle in which the dust layer was removed.     

Effect of preparation method of noble metal supported catalyts on formaldehyde oxidation at room temperature: Gas or liquid phase reduction

Formaldehyde (HCHO) is toxic to the human body and is one of the main threats to the indoor air quality (IAQ). As such, the removal of HCHO is imperative to improving the IAQ, whereby the most useful method to effectively remove HCHO at room temperature is catalytic oxidation. This review discusses catalysts for HCHO room-temperature oxidation, which are categorized according to their preparation methods, i.e., gas-phase reduction and liquid-phase reduction methods. The HCHO oxidation performances, structural features, and reaction mechanisms of the different catalysts are discussed, and directions for future research on catalytic oxidation are reviewed.     

Use of multivariate indicator kriging methods for assessing groundwater contamination extents for irrigation

Multivariate geostatistical approaches have been applied extensively in characterizing risks and uncertainty of pollutant concentrations exceeding anthropogenic regulatory limits. Spatially delineating an extent of contamination potential is considerably critical for regional groundwater resources protection and utilization. This study used multivariate indicator kriging (MVIK) to determine spatial patterns of contamination extents in groundwater for irrigation and made a predicted comparison between two types of MVIK, including MVIK of multiplying indicator variables (MVIK-M) and of averaging indicator variables (MVIK-A). A cross-validation procedure was adopted to examine the performance of predicted errors, and various probability thresholds used to calculate ratios of declared pollution area to total area were explored for the two MVIK methods. The assessed results reveal that the northern and central aquifers have excellent groundwater quality for irrigation use. Results obtained through a cross-validation procedure indicate that MVIK-M is more robust than MVIK-A. Furthermore, a low ratio of declared pollution area to total area in MVIK-A may result in an unrealistic and unreliable probability used to determine extents of pollutants. Therefore, this study suggests using MVIK-M to probabilistically determine extents of pollutants in groundwater.     

Application of portable X-ray fluorescence (pXRF) for heavy metal analysis of soils in crop fields near abandoned mine sites

To get representative soil samples, a sampling method was verified for crop fields in the vicinity of abandoned mine sites. Application of appropriate sampling or analytical methods is very important as it affects the costs, time, and accuracy of the refined investigation of soil contamination. Two-time sampling for each crop field was conducted to verify the reproducibility of a zigzag method for soil sampling. The soil analysis using a portable X-ray fluorescence (pXRF) device was conducted to measure concentrations of metal species in soils, and its results were compared to the extracted concentrations by the Korean Standard Test (KST) for soils. As a result, the determination coefficient (R ²) of linear regression analysis for data obtained by ex situ precise measurement or in situ field screening using pXRF was closely related with the ratio of the extracted concentration by KST to interference-free detection limits (IFDL) of pXRF (designated as KST/IFDL). As the specific metal species had a higher ratio of KST/IFDL, its R ² was even higher in the field screening tests. However, the slopes of linear regression analysis for most metal species extracted by aqua-regia were close to 1.0 so that extracted concentrations by aqua-regia were similar to the analytical values obtained by pXRF, whereas extraction using a weak acid (0.1 M HCl) had different slopes for soils contaminated with different ranges of concentrations of metal species. Especially Zn showed not only high ratios of KST/IFDL because of aqua regia extraction, but also high determination coefficients. Because of its simple, rapid, and accurate capacities for metal analysis, the pXRF analysis showed high applicability in ex situ precise measurements or in situ field screening of metal analysis. In terms of applicability for regulation, especially in situ pXRF field screening with the zigzag method could be effectively applied to achieve an economical survey by determining hot spots or non-contaminated areas if aqua-regia was applied as the extracting agent in the KST for soils.