Development of aquatic life criteria in China: viewpoint on the challenge

While more developed countries have a well-established systems to develop water quality criteria (WQC), little research has been done on the adequacy of the current WQC to protect endemic species of China. In order to maintain the health of aquatic ecosystems in China, a series of projects to establish national WQC based on regional characteristics has recently been initiated. However, the establishment of a completely novel methodology would be costly and time consuming. Also, due to the similarities in physiologies and natural histories of classes of aquatic organisms, there is no reason to believe that WQC would not be sufficient to protect unique species in China. This review was undertaken to identify key outstanding issues regarding establishment of aquatic life criteria (ALC) to be applied in China, including prioritization of chemicals, test species, mode of action, field/semi-field data, and methods of aggregating the information and calculating the ALC. This was used to identify the principle issues that need to be addressed in order to better understand the methods for development of criteria for the protection of aquatic life and provide a reference to China and other developing countries committed to the establishment of their own WQC system.     

Assessing Sorbents for Mercury Control in Coal-Combustion Flue Gas

Abstract

Sorbent injection for Hg control is one of the most promising technologies for reducing Hg emissions from power-generation facilities, particularly units that do not require wet scrubbers for SO₂ control. Since 1992, EPRI has been assessing the performance of Hg sorbents in pilot-scale systems installed at full-scale facilities. The initial tests were conducted on a 5000-acfm (142-m³/min) pilot baghouse. Screening potential sorbents at this scale required substantial resources for installation and operation and did not provide an opportunity to characterize sor-bents over a wide temperature range.

Data collected in the laboratory and in field tests indicate that sorbents are affected by flue gas composition and temperature. Tests carried out in actual flue gas at a number of power plants also have shown that sorbent performance can be site-specific. In addition, data collected at a field site often are different from data collected in the laboratory, with simulated flue gas mixed to match the major components in the site’s gas. To effectively estimate the costs of Hg sorbent systems at different plants, a measure of sorbent performance in the respective flue gases must be obtained. However, injection testing at multiple facilities with large pilot systems is not practical.

Over the past five years, fixed-bed characterization testing, modeling studies, and bench-scale injection testing have been undertaken to develop a low-cost technique to characterize sorbent performance in actual flue gas and subsequently to project normalized costs for Hg removal prior to full-scale demonstration. This article describes the techniques used and summarizes field-testing results from two plants burning Powder River Basin (PRB) coal for commercial activated carbon and several other sorbent types. Full-scale projections based on the results and data collected on larger-scale systems also are included.     

An ecological perspective on nanomaterial impacts in the environment

Growing concerns over the potential for unintended, adverse consequences of engineered nanoparticles (ENPs) in the environment have generated new research initiatives focused on understanding the ecological effects of ENPs. Almost nothing is currently known about the fate and transport of ENPs in environmental waters, soils, and sediments or about the biological impacts of ENPs in natural environments, and the bulk of modern nanotoxicogical research is focused on highly controlled laboratory studies with single species in simple media. In this paper, we provide an ecological perspective on the current state of knowledge regarding the likely environmental impacts of nanomaterials and propose a strategy for making rapid progress in new research in ecological nanoscience.     

Evaluation of ion exchange resins for the removal of dissolved organic matter from biologically treated paper mill effluent

In this study, the efficiency of six ion exchange resins to reduce the dissolved organic matter (DOM) from a biologically treated newsprint mill effluent was evaluated and the dominant removal mechanism of residual organics was established using advanced organic characterisations techniques. Among the resins screened, TAN1 possessed favourable Freundlich parameters, high resin capacity and solute affinity, closely followed by Marathon MSA and Marathon WBA. The removal efficiency of colour and lignin residuals was generally good for the anion exchange resins, greater than 50% and 75% respectively. In terms of the DOM fractions removal measured through liquid chromatography–organic carbon and nitrogen detector (LC–OCND), the resins mainly targeted the removal of humic and fulvic acids of molecular weight ranging between 500 and 1000 g mol^?1, the portion expected to contribute the most to the aromaticity of the effluent. For the anion exchange resins, physical adsorption operated along with ion exchange mechanism assisting to remove neutral and transphilic acid fractions of DOM. The column studies confirmed TAN1 being the best of those screened, exhibited the longest mass transfer zone and maximum treatable volume of effluent. The treatable effluent volume with 50% reduction in dissolved organic carbon (DOC) was 4.8 L for TAN1 followed by Marathon MSA – 3.6 L, Marathon 11 – 2.0 L, 21K-XLT – 1.5 L and Marathon WBA – 1.2 L. The cation exchange resin G26 was not effective in DOM removal as the maximum DOC removal obtained was only 27%. The resin capacity could not be completely restored for any of the resins; however, a maximum restoration up to 74% and 93% was achieved for TAN1 and Marathon WBA resins. While this feasibility study indicates the potential option of using ion exchange resins for the reclamation of paper mill effluent, the need for improving the regeneration protocols to restore the resin efficiency is also identified. Similarly, care should be taken while employing LC–OCND for characterising resin-treated effluents, as the resin degradation is expected to contribute some organic carbon moieties misleading the actual performance of resin.     

Do DBPs swim in salt water pools? Comparison of 60 DBPs formed by electrochemically generated chlorine vs. conventional chlorine

Disinfectants are added to swimming pools to kill harmful pathogens. Although liquid chlorine(sodium hypochlorite) is the most commonly used disinfectant, alternative disinfection techniques like electrochemically generated mixed oxidants or electrochemically generated chlorine, often referred to as salt water pools, are growing in popularity. However, these disinfectants react with natural organic matter and anthropogenic contaminants introduced to the pool water by swimmers to form disinfectio...     

Wetland development trends in coastal North Carolina,USA, from 1970 to 1984

Coastal wetlands are a valuable resource to North Carolina, USA, representing important habitat for marine organisms and providing flood control areas and buffer zones from marine storms. An analysis of wetland development trends in coastal North Carolina from 1970 to 1984 was conducted using over 3000 files containing 15 years of permitting records. The total amount of coastal wetland area altered due to authorized development under the Coastal Area Management Act (CAMA), the Dredge and Fill Law, and Section 404 of the Federal Water Pollution Control Act is 1740 ha. This represents nearly 2% of the salt marsh wetlands along the coast of North Carolina. The number of permits issued steadily increased during the 1980s; however, the total amount of wetland loss decreased each year. A few large projects in the early 1970s accounted for nearly 70% of all wetland area developed during the 15-year period. Nearly two-thirds of all projects involving wetland destruction involved impacts on high marsh ecosystems. Bulkheads, canals, and filling activities made up 80% of the projects requiring permits; 62% of the permits were issued to private landowners, but this group accounted for only 16% of the losses of wetland area. Utility companies, which accounted for less than 1% of the permits issued, were responsible for 46% of the permitted wetland loss during the 15-year study period. Future studies should address agriculture and forestry practices which are exempt under CAMA laws and therefore their effects on wetland alteration have not been quantified.     

Environmentally conscious manufacturing: A technology for the nineties

Editor's note: Companies embracing TQEM must evaluate and change their manufacturing processes to stay globally competitive in the nineties. This article shows how an environmentally conscious manufacturing program incorporating new approaches to waste reduction will help companies achieve their corporatewide TQEM and strategic goals.     

货物集装箱扫描技术的发展

恐怖分子利用货物集装箱走私核武器或用于放射性频散装置(RDD)的放射性材料,美国和其他国家目前都在面临这一严重威胁.