The Southeastern Aerosol Research and Characterization Study, part 3: continuous measurements of fine particulate matter mass and composition

Deployment of continuous analyzers in the Southeastern Aerosol Research and Characterization Study (SEARCH) network began in 1998 and continues today as new technologies are developed. Measurement of fine particulate matter (PM2.5) mass is performed using a dried, 30 degrees C tapered element oscillating microbalance (TEOM). TEOM measurements are complemented by observations of light scattering by nephelometry. Measurements of major constituents include: (1) SO4(2-) via reduction to SO2; (2) NH4+ and NO3- via respective catalytic oxidation and reduction to NO, (3) black carbon (BC) by optical absorption, (4) total carbon by combustion to CO2, and (5) organic carbon by difference between the latter two measurements. Several illustrative examples of continuous data from the SEARCH network are presented. A distinctive composite annual average diurnal pattern is observed for PM2.5 mass, nitrate, and BC, likely indicating the influence of traffic-related emissions, growth, and break up of the boundary layer and formation of ammonium nitrate. Examination of PM2.5 components indicates the need to better understand the continuous composition of the unmeasured "other" category, because it contributes a significant fraction to total mass during periods of high PM2.5 loading. Selected episodes are presented to illustrate applications of SEARCH data. An SO2 conversion rate of 0.2%/hr is derived from an observation of a plume from a coal-fired power plant during early spring, and the importance of local, rural sources of NH3 to the formation of ammonium nitrate in particulate matter (PM) is demonstrated.     

Steam demand reduction of water–gas shift reaction in IGCC power plants with pre-combustion CO2 capture

This paper presents the results of system assessments that were conducted to compare conventional and advanced water–gas shift reactor sections. The latter are specifically tailored for Integrated Gasification Combined Cycles (IGCC) power plants with pre-combustion CO₂ capture. The advanced shift reactor section comprises four staged reactors with distributed feeds of synthesis gas and quench water in between the reactors. Conventional shift reactor sections consist of two sequential reactors with intermediate cooling, where the entire synthesis gas stream passes both reactors.The advanced shift reactor section reduces the steam requirement of the water–gas shift reaction up to 70% in comparison with conventional configurations, at carbon dioxide capture ratios of approximately 85%. This reduction allows for lower electric efficiency penalties, thus higher net electric outputs for IGCC power plants with CO₂ capture. For each case, the CO₂ capture ratio was optimised for the lowest specific lost work per amount of captured CO₂. Both the number of reactors and the total catalyst volume are higher for the advanced shift reactor sections, resulting in increased capital expenses. In case of four staged reactors, the additional expenses are expected to be outperformed by the increased revenues associated with the higher net electric output.     

Heavy metal concentrations in particle size fractions from street dust of Murcia (Spain) as the basis for risk assessment

Street dust has been sampled from six different types of land use of the city of Murcia (Spain). The samples were fractionated into eleven particle size fractions (<2, 2-10, 10-20, 20-50, 50-75, 75-106, 106-150, 150-180, 180-425, 425-850 μm and 850-2000 μm) and analyzed for Pb, Cu, Zn and Cd. The concentrations of these four potentially toxic metals were assessed, as well as the effect of particle size on their distribution. A severe enrichment of all metals was observed for all land-uses (industrial, suburban, urban and highways), with the concentration of all metals affected by the type of land-use. Coarse and fine particles in all cases showed concentrations of metals higher than those found in undisturbed areas. However, the results indicated a preferential partitioning of metals in fine particle size fractions in all cases, following a logarithmic distribution. The accumulation in the fine fractions was higher when the metals had an anthropogenic origin. The strong overrepresentation of metals in particles <10 μm indicates that if the finest fractions are removed by a vacuum-assisted dry sweeper or a regenerative-air sweeper the risk of metal dispersion and its consequent risk for humans will be highly reduced. Therefore, we recommend that risk assessment programs include monitoring of metal concentrations in dust where each land-use is separately evaluated. The finest particle fractions should be examined explicitly in order to apply the most efficient measures for reducing the risk of inhalation and ingestion of dust for humans and risk for the environment.     

Evaluation of The Efficiency of Various Commercial Products for The Bioremediation of Hydrocarbon Contaminated Soil

Summary Bioremediation has become an important method for the treatment of terrestrial oil spills and is often favoured over strictly physical-chemical methods. In this study, enzymatic analyses and signature lipid biomarkers were employed to evaluate the efficacy of selected bioremediation products on control and oil contaminated soil plots. It is envisioned that these biological indicators may be used as possible adjuncts to the strictly physical-chemical criteria most commonly employed. The application of the enzymatic and signature biomarker methods for product evaluation proved successful. The enzymatic assays provided a valuable insight into shifts in the functional diversity of the soil microbial communities resultant from the various treatments. Stimulation or inhibition of the microbial communities as a result of the various treatments was also demonstrated, particularly with regards to dehydrogenase activity. Phospholipid fatty acid profiles proved sufficiently sensitive to allow differentiation between products and resultant microbial communities that corresponded to satisfactory and unsatisfactory petroleum hydrocarbon removal.     

Separate collection of household food waste for anaerobic degradation - Comparison of different techniques from a systems perspective

Four systems for household food waste collection are compared in relation the environmental impact categories eutrophication potential, acidification potential, global warming potential as well as energy use. Also, a hotspot analysis is performed in order to suggest improvements in each of the compared collection systems. Separate collection of household food waste in paper bags (with and without drying prior to collection) with use of kitchen grinders and with use of vacuum system in kitchen sinks were compared. In all cases, food waste was used for anaerobic digestion with energy and nutrient recovery in all cases. Compared systems all resulted in net avoidance of assessed environmental impact categories; eutrophication potential (-0.1 to -2.4kg NO(3)(-)eq/ton food waste), acidification potential (-0.4 to -1.0kg SO(2)(-)eq/ton food waste), global warming potential (-790 to -960kg CO(2)(-)eq/ton food waste) and primary energy use (-1.7 to -3.6GJ/ton food waste). Collection with vacuum system results in the largest net avoidence of primary energy use, while disposal of food waste in paper bags for decentralized drying before collection result in a larger net avoidence of global warming, eutrophication and acidification. However, both these systems not have been taken into use in large scale systems yet and further investigations are needed in order to confirm the outcomes from the comparison. Ranking of scenarios differ largely if considering only emissions in the foreground system, indicating the importance of taking also downstream emissions into consideration when comparing different collection systems. The hot spot identification shows that losses of organic matter in mechanical pretreatment as well as tank connected food waste disposal systems and energy in drying and vacuum systems reply to the largest impact on the results in each system respectively.     

Water input requirements of the rapidly shrinking Dead Sea

The deepest point on Earth, the Dead Sea level, has been dropping alarmingly since 1978 by 0.7 m/a on average due to the accelerating water consumption in the Jordan catchment and stood in 2008 at 420 m below sea level. In this study, a terrain model of the surface area and water volume of the Dead Sea was developed from the Shuttle Radar Topography Mission data using ArcGIS. The model shows that the lake shrinks on average by 4 km²/a in area and by 0.47 km³/a in volume, amounting to a cumulative loss of 14 km³ in the last 30 years. The receding level leaves almost annually erosional terraces, recorded here for the first time by Differential Global Positioning System field surveys. The terrace altitudes were correlated among the different profiles and dated to specific years of the lake level regression, illustrating the tight correlation between the morphology of the terrace sequence and the receding lake level. Our volume-level model described here and previous work on groundwater inflow suggest that the projected Dead Sea–Red Sea channel or the Mediterranean–Dead Sea channel must have a carrying capacity of >0.9 km³/a in order to slowly re-fill the lake to its former level and to create a sustainable system of electricity generation and freshwater production by desalinization. Moreover, such a channel will maintain tourism and potash industry on both sides of the Dead Sea and reduce the natural hazard caused by the recession.     

The influence of age on the associations between HR practices and both affective commitment and job satisfaction: A meta-analysis

Research on the association between high commitment Human Resource (HR) practices and work-related outcomes at the individual level rarely focuses on age differences. To fill this knowledge gap, a meta-analysis has been conducted to examine how the relationships between the availability of high commitment HR practices, as perceived by employees, and affective commitment and job satisfaction change with age. Drawing on Selection, Optimization, and Compensation (SOC) theory and on Regulatory Focus theory, we identify a bundle of maintenance HR practices and a bundle of development HR practices, and hypothesize that the association between maintenance HR practices and work-related attitudes strengthens with age, and that the association between development HR practices and work-related attitudes weakens with age. Our meta-analysis of 83 studies reveals that, in line with social exchange and signaling theories, employees' perceptions of HR practices are positively related to their work-related attitudes, and that calendar age influences this relationship largely as expected. These results are discussed in light of the above mentioned theories. Copyright © 2009 John Wiley & Sons, Ltd.     

Property-close source separation of hazardous waste and waste electrical and electronic equipment--a Swedish case study

Through an agreement with EEE producers, Swedish municipalities are responsible for collection of hazardous waste and waste electrical and electronic equipment (WEEE). In most Swedish municipalities, collection of these waste fractions is concentrated to waste recycling centres where households can source-separate and deposit hazardous waste and WEEE free of charge. However, the centres are often located on the outskirts of city centres and cars are needed in order to use the facilities in most cases. A full-scale experiment was performed in a residential area in southern Sweden to evaluate effects of a system for property-close source separation of hazardous waste and WEEE. After the system was introduced, results show a clear reduction in the amount of hazardous waste and WEEE disposed of incorrectly amongst residual waste or dry recyclables. The systems resulted in a source separation ratio of 70 wt% for hazardous waste and 76 wt% in the case of WEEE. Results show that households in the study area were willing to increase source separation of hazardous waste and WEEE when accessibility was improved and that this and similar collection systems can play an important role in building up increasingly sustainable solid waste management systems.     

Air Quality Measurements for the Aerosol Research and Inhalation Epidemiology Study

Abstract

Measurements of pollutant gases, airborne particulate matter mass and composition, and meteorology have been made at a core site near downtown Atlanta, GA, since August 1998 in support of the Aerosol Research and Inhalation Epidemiology Study (ARIES). This site is one of eight in the Southeastern Aerosol Research and Characterization network. The measurement objective is to provide a long-term, multivariate dataset suitable for investigating statistical associations of respiratory and cardiovascular disease with airborne particulate matter composition, meteorology, and copollutant gases through epidemiologic modeling. Measurements are expected to continue through 2010. Ancillary multiyear measurements at additional sites in the Atlanta metropolitan area and in short-term exposure assessments have been used to estimate the exposure/measurement error associated with using data from a central site to approximate human exposures for the entire area. To date, 13-, 25-, and 53-month air quality datasets have been used in epidemiologic analyses.