Spectrophotometric determination of trifluralin in commercial formulations and agricultural samples using factorial design

A simple spectrophotometric method was developed for determination of trifluralin in commercial formulation and food samples. The method was based on the hydrolysis of trifluralin with sodium hydroxide to form 2,6-dinitro-4-trifluoromethylaniline. The resultant aniline group was diazotized with nitrate in acidic media and the diazotized product was coupled with β-naphthol to form red colored product having λ_max 550 nm. The reaction conditions were optimized for hydrolysis as well as for the diazotization reaction. The Beer’s law was obeyed over the range of 0.2–17 μg mL⁻¹ with molar absorptivity of 1.5 × 10⁴ L mol⁻¹ cm⁻¹. The relative standard deviation was found to be 3.6%. A two level factorial design of 2³ was used for optimization of all parameters. The influence of different factors and their interactions on the final azo dye formation were also studied from these factorial designs. The method has been applied successfully for the analysis of commercial formulations and agricultural samples. The recovery for the determination of trifluralin was found to be in the range 95–97%.     

Physicochemical quality evaluation of groundwater and development of drinking water quality index for Araniar River Basin, Tamil Nadu, India

Groundwater is the most important natural resource which cannot be optimally used and sustained unless its quality is properly assessed. In the present study, the spatial and temporal variations in physicochemical quality parameters of groundwater of Araniar River Basin, India were analyzed to determine its suitability for drinking purpose through development of drinking water quality index (DWQI) maps of the post- and pre-monsoon periods. The suitability for drinking purpose was evaluated by comparing the physicochemical parameters of groundwater in the study area with drinking water standards prescribed by the World Health Organization (WHO) and Bureau of Indian Standards (BIS). Interpretation of physicochemical data revealed that groundwater in the basin was slightly alkaline. The cations such as sodium (Na⁺) and potassium (K⁺) and anions such as bicarbonate (HCO₃ ^?) and chloride (Cl^?) exceeded the permissible limits of drinking water standards (WHO and BIS) in certain pockets in the northeastern part of the basin during the pre-monsoon period. The higher total dissolved solids (TDS) concentration was observed in the northeastern part of the basin, and the parameters such as calcium (Ca²⁺), magnesium (Mg²⁺), sulfate (SO₄ ^2?), nitrate (NO₃ ^?), and fluoride (F^?) were within the limits in both the seasons. The hydrogeochemical evaluation of groundwater of the basin demonstrated with the Piper trilinear diagram indicated that the groundwater samples of the area were of Ca²⁺-Mg²⁺-Cl^?-SO₄ ^2?, Ca²⁺-Mg²⁺-HCO₃ ^? and Na⁺-K⁺-Cl^?-SO₄ ^2? types during the post-monsoon period and Ca²⁺-Mg²⁺-Cl^?-SO₄ ^2?, Na⁺-K⁺-Cl^?-SO₄ ^2? and Ca²⁺-Mg²⁺-HCO₃ ^? types during the pre-monsoon period. The DWQI maps for the basin revealed that 90.24 and 73.46 % of the basin area possess good quality drinking water during the post- and pre-monsoon seasons, respectively.     

Catalytic conversion of waste tyres into valuable hydrocarbons

Tyre recycling has become a necessity because of the huge piles of tyres that represent a threat to the environment. The used tyres represent a source of energy and valuable chemical products. Waste tyres were pyrolysed catalytically in a batch reactor under atmospheric pressure. Calcium carbide was used as a catalyst to explore its effect on pyrolysis product distribution. The effect of temperature, amount of catalyst and time on the yields of the pyrolysed products was investigated. Char yield decreased with increase of pyrolysis temperature while total gas and liquid yields increased. The liquid fraction was obtained with boiling point up to 320 °C. The physical and chemical properties of the pyrolysed products obtained were characterized. The catalytic pyrolysis produced 45 wt.% aromatic, 35 wt.% aliphatic and 20 wt.% of polar hydrocarbons. The distillation data showed that ∼80% of oil has boiling point below 270 °C which is the boiling point for 50% of distilled product in commercial diesel oil. The oil fraction was found to have high gross calorific value; GCV (42.8 MJ kg⁻¹). Its Specific gravity, viscosity, Kinematic viscosity, freezing point and diesel index were also within the limits of diesel fuel. The char residues were studied to investigate their characteristics for use as a possible adsorbent. Surface area of char before and after acid demineralization was determined to determine the adsorptive features for waste water treatment.     

Quantification of triazine herbicides in soil by microwave-assisted extraction and high-performance liquid chromatography

A method for the determination of herbicides residues, triazine (atrazine, metribuzin, ametryn, and terbutryn), in soil samples with high-performance liquid chromatography (HPLC)?CUV detection is described. The proposed method is based on microwave-assisted extraction (MAE) of soil samples for 4 min at 80% of 850-W magnetron outputs in the presence of mixture of solvents (methanol/acetonitrile/ethylacetate). Related important factors influencing the MAE efficiency, such as the solvent type and volume, irradiation energy, and time, were optimized in detail. Calibration curve ranges established using HPLC for metribuzin, atrazine, ametryn, and terbutryn are 1.0?C19.0, 0.9?C18.0, 0.6?C11.0, and 0.7?C11.0 µg mL^???1, respectively. The limits of detection of metribuzin, atrazine, ametryn, and terbutryn are 0.30, 0.24, 0.16, and 0.20 µg mL^???1 while limits of quantification are 1.0, 0.80, 0.50, and 0.60 µg mL^???1, respectively. A Plackett?CBurman factorial design was used as a screening method in order to select the variables that influence MAE extraction. The recoveries of the method at three different spiked levels were assessed by analyzing real soil samples and were found to be in the range of 83.33 ± 0.12?C96.33 ± 0.23 with good precision (<8%).     

Recovery of critical metals from leach solution of electronic waste using magnetite electrospun carbon nanofibres composite

Environmental Science and Pollution Research - Scarcity in mining and geo-political direction diverts attention toward critical metal recycling. Gallium (Ga), indium (In) and germanium (Ge) are...     

Hunted hunters? Effect of group size on predation risk and growth in the Australian subsocial crab spider Diaea ergandros

A reduced predation risk is considered to be a major adaptive advantage of sociality. While most studies are concerned with non-predatory prey species, group-living predators are likely to face similar threats from higher-order predators. We studied the relationship between group size and predation risk in the subsocial crab spider Diaea ergandros by testing predictions from theoretical models including attack abatement as well as the formation of protective retreats. In a field survey, we found predatory clubionid spiders in 35 % of the D. ergandros nests and as predicted, nest size did not correlate with predator presence. In a subsequent laboratory experiment, we observed survival probability, nest construction activity and feeding behaviour including weight development between groups of different sizes as well as in the absence or presence of a predator. Large groups had an advantage in terms of survival and growth compared to smaller groups or single individuals. They also built significantly larger nests than smaller groups, supporting the idea of protective retreat formation being an adaptive benefit to group living. Even though clubionids did attack D. ergandros, they did not significantly affect overall mortality of D. ergandros. The feeding experiment showed that spiders fed on a larger proportion of flies in the presence of a predator. However, these groups gained significantly less weight compared to the control groups, indicating that the potential predators not only act as predators but also as food competitors, constituting a twofold cost for D. ergandros.     

Magnetic particles precipitated onto wheat husk for removal of methyl blue from aqueous solution

Magnetic particles prepared via co-precipitation and impregnated onto wheat husk (MN-WH) were used for the removal of methyl blue (MB) from aqueous solution. Experiments were conducted in a batch mode for optimization regarding pH, contact time, adsorbent dose, initial dye concentrations, and temperature. Maximum adsorption (98%) was achieved at pH 5. The adsorption data were fitted into pseudo-first, pseudo-second, intraparticle diffusion, and Elovich equation revealing that adsorption followed pseudo-second-order kinetics. The four most common isotherm models, i.e. the Langmuir, Freundlich, Tempkin, and Dubinin–Radushkevich (D–R), were used to evaluate the data, with the best fit to a Langmuir isotherm (R² = 0.996), followed by a Freundlich isotherm (R² = 0.995), indicating monolayer adsorption of MB on the surface of MN-WH. Thermodynamic parameters calculated from the Van't Hoff equation revealed that the adsorption is exothermic (ΔHº = ?19.7 kJ mol^?1).