Effects of introducing threatened falcons into vineyards on abundance of passeriformes and bird damage to grapes

Agricultural landscapes are becoming an important focus of animal conservation, although initiatives to conserve predators to date have rarely provided economic benefits to agricultural producers. We examined whether introduction to vineyards of the New Zealand Falcon (Falco novaeseelandiae), a species listed as threatened by the New Zealand Department of Conservation, affected the abundance of 4 species of Passeriformes that are considered vineyard pests or affected the amount of economic loss due to grape (Vitis vinifera) damage. Three of the species were introduced and remove whole grapes from bunches (Blackbird [Turdus merula], Song Thrush [Turdus philomelos], and Starling [Sturnus vulgaris]), whereas the one native species (Silvereye [Zosterops lateralis]) pecks holes in grapes. The introduction of falcons to vineyards was associated with a significant decrease in the abundance of introduced passerines and with a 95% reduction in the number of grapes removed relative to vineyards without falcons. Falcon presence was not associated with a change in the number of Silvereyes, but there was a 55% reduction in the number of grapes pecked in vineyards with falcons. Our results indicate that, relative to damage in vineyards without falcons, the presence of a falcon could potentially result in savings of US$234/ha for the Sauvignon Blanc variety of grapes and $326/ha for Pinot Noir variety of grapes.     

Automobile injury trends in the contemporary fleet: Belted occupants in frontal collisions

Objective: As vehicle safety technologies and evaluation procedures advance, it is pertinent to periodically evaluate injury trends to identify continuing and emerging priorities for intervention. This study examined detailed injury distributions and injury risk trends in belted occupants in frontal automobile collisions (10 o’clock to 2 o’clock) using NASS-CDS (1998–2015).

Methods: Injury distributions were examined by occupant age and vehicle model year (stratified at pre- and post-2009). Logistic regression models were developed to examine the effects of various factors on injury risk (by body region), controlling for delta-V, sex, age, height, body mass index (BMI), vehicle model year (again stratified at 2009).

Results: Among other observations, these analyses indicate that newer model year vehicles (model year [MY] 2009 and later) carry less risk of Abbreviated Injury Scale (AIS) 2+ and AIS 3+ injury compared to older model year vehicles, with odds ratios of 0.69 (AIS 2+) and 0.45 (AIS 3+). The largest reductions in risk between newer model year vehicles and older model year vehicles occur in the lower extremities and in the risk of skull fracture. There is no statistically significant change in risk of AIS 3+ rib fracture or sternum injury between model year categories. Females are at greater risk of AIS 2+ and AIS 3+ injury compared to males, with increased risk across most injury types.

Conclusions: For belted occupants in frontal collisions, substantial reductions in injury risk have been realized in many body regions in recent years. Risk reduction in the thorax has lagged other body regions, resulting in increasing prevalence among skeletal injuries in newer model year vehicles (especially in the elderly). Injuries also remain common in the arm and hand/wrist for all age ranges studied. These results provide insight into where advances in the field have made gains in occupant protection and what injury types remain to be addressed.     

Extrapolating cetacean densities to quantitatively assess human impacts on populations in the high seas

As human activities expand beyond national jurisdictions to the high seas, there is an increasing need to consider anthropogenic impacts to species inhabiting these waters. The current scarcity of scientific observations of cetaceans in the high seas impedes the assessment of population‐level impacts of these activities. We developed plausible density estimates to facilitate a quantitative assessment of anthropogenic impacts on cetacean populations in these waters. Our study region extended from a well‐surveyed region within the U.S. Exclusive Economic Zone into a large region of the western North Atlantic sparsely surveyed for cetaceans. We modeled densities of 15 cetacean taxa with available line transect survey data and habitat covariates and extrapolated predictions to sparsely surveyed regions. We formulated models to reduce the extent of extrapolation beyond covariate ranges, and constrained them to model simple and generalizable relationships. To evaluate confidence in the predictions, we mapped where predictions were made outside sampled covariate ranges, examined alternate models, and compared predicted densities with maps of sightings from sources that could not be integrated into our models. Confidence levels in model results depended on the taxon and geographic area and highlighted the need for additional surveying in environmentally distinct areas. With application of necessary caution, our density estimates can inform management needs in the high seas, such as the quantification of potential cetacean interactions with military training exercises, shipping, fisheries, and deep‐sea mining and be used to delineate areas of special biological significance in international waters. Our approach is generally applicable to other marine taxa and geographic regions for which management will be implemented but data are sparse.     

Satellite-based decadal change assessments of pan-Arctic environments

Remote sensing can advance the work of the Circumpolar Biodiversity Monitoring Program through monitoring of satellite-derived terrestrial and marine physical and ecological variables. Standardized data facilitate an unbiased comparison across variables and environments. Using MODIS standard products of land surface temperature, percent snow covered area, NDVI, EVI, phenology, burned area, marine chlorophyll, CDOM, sea surface temperature, and marine primary productivity, significant trends were observed in almost all variables between 2000 and 2017. Analysis of seasonal data revealed significant breakpoints in temporal trends. Within the terrestrial environment, data showed significant increasing trends in land surface temperature and NDVI. In the marine environment, significant increasing trends were detected in primary productivity. Significantly earlier onset of green up date was observed in bioclimate subzones C&E and longer end of growing season in B&E. Terrestrial and marine parameters showed similar rates of change with unidirectional change in terrestrial and significant directional and magnitude shifts in marine.     

Corrosion control when using passively treated abandoned mine drainage as alternative makeup water for cooling systems

Passively treated abandoned mine drainage (AMD) is a promising alternative to fresh water as power plant cooling water system makeup water in mining regions where such water is abundant. Passive treatment and reuse of AMD can avoid the contamination of surface water caused by discharge of abandoned mine water, which typically is acidic and contains high concentrations of metals, especially iron. The purpose of this study was to evaluate the feasibility of reusing passively treated AMD in cooling systems with respect to corrosion control through laboratory experiments and pilot-scale field testing. The results showed that, with the addition of the inhibitor mixture orthophosphate and tolyltriazole, mild steel and copper corrosion rates were reduced to acceptable levels (< 0.127 mm/y and < 0.0076 mm/y, respectively). Aluminum had pitting corrosion problems in every condition tested, while cupronickel showed that, even in the absence of any inhibitor and in the presence of the biocide monochloramine, its corrosion rate was still very low (0.018 mm/y).     

Accumulation of 14C-trinitrotoluene and related nonextractable (bound) residues in Eisenia fetida

To determine if trinitrotoluene (TNT) forms nonextractable residues in earthworms and to measure the relative degree of accumulation as compared to TNT and its deaminated metabolites, Eisenia fetida was exposed to ¹⁴C-TNT using dermal contact to filter paper or exposure to soil. Nonextractable residues made up 32-68% of total body burden depending on exposure media and depuration time. Parent TNT accounted for less than 3% of radioactivity, while ADNTs accounted for 7-38%. Elimination half-lives were 61-120 h for TNT, ADNTs, and DANTs, which was significantly lower than the half-lives found for nonextractable residues, 201-240 h. However, over 80% of the nonextractable residue was solubilized using weak acid (pH 2). Based on our findings that TNT accumulation occurs primarily as nonextractable residues, which have a longer half-life, and that nonextractable residues can be solubilized, we propose that nonextractable residues could be used as a selective biomarker for assessing TNT contamination.     

Surface chemistry of a pine-oil cleaner and other terpene mixtures with ozone on vinyl flooring tiles

Indoor environments are dynamic reactors where consumer products (such as cleaning agents, deodorants, and air fresheners) emit volatile organic compounds (VOCs) that can subsequently interact with indoor oxidants such as ozone (O₃), hydroxyl radicals, and nitrate radicals. Typically, consumer products consist of mixtures of VOCs and semi-VOCs which can react in the gas-phase or on surfaces with these oxidants to generate a variety of oxygenated products. In this study, the reaction of a pine-oil cleaner (POC) with O₃ (100 ppb) on a urethane-coated vinyl flooring tile was investigated at 5% and 50% relative humidity. These results were compared to previous α-terpineol + O₃ reactions on glass and vinyl surfaces. Additionally, other terpene and terpene alcohol mixtures were formulated to understand the emission profiles as seen in the POC data. Results showed that the α-terpineol + O₃ reaction products were the prominent species that were also observed in the POC/O₃ surface experiments. Furthermore, α-terpineol + O₃ reactions generate the largest fraction of oxygenated products even in equal mixtures of other terpene alcohols. This finding suggests that the judicial choice of terpene alcohols for inclusion in product formulations may be useful in reducing oxidation product emissions.     

The definition of species richness used by species sensitivity distributions approximates observed effects of salinity on stream macroinvertebrates

The risk of chemicals for ecological communities is often forecast with species sensitivity distributions (SSDs) which are used to predict the concentration which will protect p% of species (PC_p value). However, at the PC_p value, species richness in nature would not necessary be p% less than at uncontaminated sites. The definition of species richness inherent to SSDs (contaminant category richness) contrasts with species richness typically measured in most field studies (point richness). We determine, for salinity in eastern Australia, whether these definitions of stream macroinvertebrate species richness are commensurable. There were strong relationships (r² ≥ 0.87) between mean point species, family and Ephemeroptera, Trichoptera and Plecoptera species richness and their respective contamination category richness. Despite differences in the definition of richness used by SSDs and field biomonitoring, their results in terms of relative species loss from salinity in south-east Australia are similar. We conclude that in our system both definitions are commensurable.     

Enhanced removal of heavy metals in primary treatment using coagulation and flocculation.

The goal of this study was to determine the removal efficiencies of chromium, copper, lead, nickel, and zinc from raw wastewater by chemically enhanced primary treatment (CEPT) and to attain a total suspended solids removal goal of 80%. Operating parameters and chemical doses were optimized by bench-scale tests. Locally obtained raw wastewater samples were spiked with heavy metal solutions to obtain representative concentrations of metals in wastewater. Jar tests were conducted to compare the metals removal efficiencies of the chemical treatment options using ferric chloride, alum, and anionic polymer. The results obtained were compared with those from other studies. It was concluded that CEPT using ferric chloride and anionic polymer is more effective than CEPT using alum for metals removal. The CEPT dosing of 40 mg/L ferric chloride and 0.5 mg/L polymer enhanced heavy metals removal efficiencies by over 200% for chromium, copper, zinc, and nickel and 475% for lead, compared with traditional primary treatment. Efficient metals capture during CEPT can result in increased allowable headworks loadings or lower metal levels in the outfall.