Understanding the processes in a historically relevant thermal and mineral spring water by using mixing and inverse geochemical models

Environmental Geochemistry and Health - The thermal mineral water of Peñón de los Baños spa (Mexico City) has been used for over 500 years starting in pre-Hispanic times and...     

Batch and continuous adsorption of Cu(II) and Zn(II) ions from aqueous solution on bi-functionalized sugarcane-based biosorbent

Environmental Science and Pollution Research - A new one-pot synthesis method optimized by a 23 experimental design was developed to prepare a biosorbent, sugarcane bagasse cellulose succinate...     

Large-scale modeling of reactive solute transport in fracture zones of granitic bedrocks

Final disposal of high-level radioactive waste in deep repositories located in fractured granite formations is being considered by several countries. The assessment of the safety of such repositories requires using numerical models of groundwater flow, solute transport and chemical processes. These models are being developed from data and knowledge gained from in situ experiments such as the Redox Zone Experiment carried out at the underground laboratory of Äspö in Sweden. This experiment aimed at evaluating the effects of the construction of the access tunnel on the hydrogeological and hydrochemical conditions of a fracture zone intersected by the tunnel. Most chemical species showed dilution trends except for bicarbonate and sulphate which unexpectedly increased with time. Molinero and Samper [Molinero, J. and Samper, J. Groundwater flow and solute transport in fracture zones: an improved model for a large-scale field experiment at Äspö (Sweden). J. Hydraul. Res., 42, Extra Issue, 157–172] presented a two-dimensional water flow and solute transport finite element model which reproduced measured drawdowns and dilution curves of conservative species. Here we extend their model by using a reactive transport which accounts for aqueous complexation, acid–base, redox processes, dissolution–precipitation of calcite, quartz, hematite and pyrite, and cation exchange between Na⁺ and Ca²⁺. The model provides field-scale estimates of cation exchange capacity of the fracture zone and redox potential of groundwater recharge. It serves also to identify the mineral phases controlling the solubility of iron. In addition, the model is useful to test the relevance of several geochemical processes. Model results rule out calcite dissolution as the process causing the increase in bicarbonate concentration and reject the following possible sources of sulphate: (1) pyrite dissolution, (2) leaching of alkaline sulphate-rich waters from a nearby rock landfill and (3) dissolution of iron monosulphides contained in Baltic seafloor sediments. Based on these results, microbially mediated processes are postulated as the most likely hypothesis to explain the measured increase of dissolved bicarbonates and sulphates after tunnel construction.     

Two- and three-dimensional ultrasound in malformations of the medullary canal: report of four cases

A comparison between two-dimensional (2D), and three-dimensional (3D) ultrasonography was made in four fetuses diagnosed with neural tube defect (NTD) in the first half of pregnancy. 3D ultrasonography (orthogonal and multiplanar systems) proved to be an excellent complement to 2D, particularly when using orthogonal planes. When using the 3D multiplanar surface imaging system, excellent images of the malformations can be rapidly obtained. Copyright © 2001 John Wiley & Sons, Ltd.     

Preventive activity in the greenhouse-construction industry of south-eastern Spain

Preventive action in companies is one of the bases of ergonomic intervention. Therefore, in the present work, the preventive activity of greenhouse-construction companies in south-eastern Spain is characterized. A sample was taken by means of a questionnaire structured in four groups of variables: general characteristics of the company, characteristics of safety and health in the construction procedures, characteristics of prevention and management in safety and health, and characteristics of the coordination during the execution of the work. The results indicate that the prevention is very poor, not adopting any preventive-management model for internationally recognized work hazards so that the information and training in preventive matters of companies and workers is insufficient. In addition, the companies have been classified into three clusters, correlating the company size and prevention management of labour hazards, revealing that the companies with higher gross income and number of workers showed better prevention management.     

Fire hazard after prescribed burning in a gorse shrubland: implications for fuel management

Prescribed burning is commonly used to prevent accumulation of biomass in fire-prone shrubland in NW Spain. However, there is a lack of knowledge about the efficacy of the technique in reducing fire hazard in these ecosystems. Fire hazard in burned shrubland areas will depend on the initial capacity of woody vegetation to recover and on the fine ground fuels existing after fire. To explore the effect that time since burning has on fire hazard, experimental tests were performed with two fuel complexes (fine ground fuels and regenerated shrubs) resulting from previous prescribed burnings conducted in a gorse shrubland (Ulex europaeus L.) one, three and five years earlier. A point-ignition source was used in burning experiments to assess ignition and initial propagation success separately for each fuel complex. The effect of wind speed was also studied for shrub fuels, and several flammability parameters were measured. Results showed that both ignition and initial propagation success of fine ground fuels mainly depended on fuel depth and were independent of time since burning, although flammability parameters indicated higher fire hazard three years after burning. In contrast, time since burning increased ignition and initial propagation success of regenerated shrub fuels, as well as the flammability parameters assessed, but wind speed had no significant effect. The combination of results of fire hazard for fine ground fuels and regenerated shrubs according to the variation in relative coverage of each fuel type after prescribed burning enabled an assessment of integrated fire hazard in treated areas. The present results suggest that prescribed burning is a very effective technique to reduce fire hazard in the study area, but that fire hazard will be significantly increased by the third year after burning. These results are valuable for fire prevention and fuel management planning in gorse shrubland areas.     

Modelling spatial and temporal variability in a zero-inflated variable: The case of stone pine (Pinus pinea L.) cone production

Modelling masting habit, i.e. the spatial synchronized annual variability in fruit production, is a huge task due to two main circumstances: (1) the identification of main ecological factors controlling fruiting processes, and (2) the common departure of fruit data series from the main basic statistical assumptions of normality and independence. Stone pine (Pinus pinea L.) is one of the main species in the Mediterranean basin that is able to grow under hard limiting conditions (sandy soils and extreme continental climate), and typically defined as a masting species. Considering the high economical value associated with edible nut production, the masting habit of stone pine has been a main concern for the forest management of the species. In the present work we have used annual fruit data series from 740 stone pine trees measured during a 13 years period (1996-2008) in order: (a) to verify our main hypothesis pointing out to the existence of a weather control of the fruiting process in limiting environments, rather than resource depletion or endogenous inherent cycles; (b) to identify those site factors, stand attributes and climate events affecting specific traits involved in fruiting process; and (c) to construct a model for predicting spatial and temporal patterns of variability in stone pine cone production at different spatial extents as region, stand and tree. Given the nature of the data, the model has been formulated as zero-inflated log-normal, incorporating random components to carry out with the observed lack of independence. This model attains efficiencies close to 70-80% in predicting temporal and spatial variability at regional scale. Though efficiencies are reduced according to the spatial extent of the model, it leads to unbiased estimates and efficiencies over 35-50% when predicting annual yields at tree or stand scale, respectively. In this sense, the proposed model is a main tool for facilitating decision making in some management aspects such as the quantification of total amount of cones annually supplied to nut industry, design of cone harvest programs or the optimal application of seedling felling.     

Organochlorine residues in blood of cinereous vultures and Eurasian griffon vultures in a northeastern Mediterranean area of nature conservation

In the National Park of Dadia-Lefkimi-Soufli Forest (Dadia NP, Greece), seven "target" PCBs and 16 organochlorine pesticides (OCs) were analysed in blood samples of cinereous vultures (Aegypius monachus) and Eurasian griffon vultures (Gyps fulvus). PCB congeners 138, 153 and 180 predominated in both species' blood samples. In both species, no differences were detected in congener levels between successive age classes, but in cinereous vulture, there were significant differences between adult and nestling in levels of PCB 28, 52, 101, 118 and between nestling and immature in levels of PCB 101. Regarding pesticides, p,p'-DDE dominated in both vultures followed by β-HCH, lindane and endosulfan sulphate, but ∑OCs were higher in griffon vulture. Significant differences were detected only between nestling and sub-adult cinereous vultures in heptachlor levels and between nestling and adult in p,p'-DDT. The origin of pollutants differs between the two vulture species and pollution patterns may not reflect those at Dadia NP.     

Environmental impact assessment of total chlorine free pulp from Eucalyptus globulus in Spain

Pulp industry plays an important role in the structure of European economy and society. Paper pulp manufacture, the industrial utilization of plant biomass, is increasing every year. In Spain, Eucalyptus is the dominant raw material and the Kraft cooking and total chlorine free (TCF) bleaching processes lead the procedures of Eucalyptus paper pulp production. This paper aims to identify and quantify the environmental impacts associated to Eucalyptus TCF pulp manufacture by using Life Cycle Assessment (LCA) as an analytical tool. The system has been defined using a cradle-to-gate perspective, that is to say from forest activities to the exit gate of the pulp mill. The production of chemicals consumed in the cooking and bleaching stages as well as the on-site energy production system is the elements that contribute the most to all impact categories analyzed (more than 50% of total contributions), except for the eutrophication potential where forest activities and waste treatment play an important roles (about 52% of total). Specific actions associated to the recovery boiler, lime kiln and digestion stage could considerably reduce the environmental impact and improve the environmental performance of the Spanish paper pulp industry.