Removal of hydrogen sulfide from biogas by adsorption and photocatalysis: a review

Environmental Chemistry Letters - Biogas is a renewable fuel produced from modern biomass, yet biogas contains traces of hydrogen sulfide, a toxic compound, that must be removed before biogas...     

Auto shredder residue recycling: Mechanical separation and pyrolysis

Directive 2000/53/EC sets a goal of 85% material recycling from end-of-life vehicles (ELVs) by the end of 2015. The current ELV recycling rate is around 80%, while the remaining waste is called automotive shredder residue (ASR), or car fluff. In Europe, this is mainly landfilled because it is extremely heterogeneous and often polluted with car fluids. Despite technical difficulties, in the coming years it will be necessary to recover materials from car fluff in order to meet the ELV Directive requirement. This study deals with ASR pretreatment and pyrolysis, and aims to determine whether the ELV material recycling target may be achieved by car fluff mechanical separation followed by pyrolysis with a bench scale reactor. Results show that flotation followed by pyrolysis of the light, organic fraction may be a suitable ASR recycling technique if the oil can be further refined and used as a chemical. Moreover, metals are liberated during thermal cracking and can be easily separated from the pyrolysis char, amounting to roughly 5% in mass. Lastly, pyrolysis can be a good starting point from a "waste-to-chemicals" perspective, but further research should be done with a focus on oil and gas refining, in order both to make products suitable for the chemical industry and to render the whole recycling process economically feasible.     

Energy consumption analysis of ABS plastic parts injected in a hybrid injection moulding machine

The energy analysis of injection moulding processes is influenced by complex interactions amongst the moulded part, its material, the injection machine, the process parameters and the environmental conditions. The availability of energy usage analyses that comprehend information on specific materials and machine kind is limited. This paper reports a study that estimates and analyses the power usage profile (PUP), the specific energy consumption (SEC), and the energy distribution at an operation level of two different injected parts made of acrylonitrile-butadiene-styrene and produced in a hybrid injection moulding machine. The methodology followed by the authors incorporates an experiment carried out in an industrial facility. A large sample size, and data-acquisition and data post-processing processes to obtain an accurate PUP and SEC are used. A breakdown of the energy consumed by the injection moulding process of the parts studied at an operation level using Sankey diagrams is discussed. The study results are used to identify strategies to reduce the energy consumed by the processes. The methodology employed, and the strategies reported could be used with other plastic parts regardless of the material and machine used. The results reported are new experimental data useful input for theoretical models.     

Microplastics in seawater: sampling strategies,laboratory methodologies,and identification techniques applied to port environment

Environmental Science and Pollution Research - The European Interreg Italy–France 2014–2020 Maritime Project SPlasH! (Stop to Plastics in H2O!) focused on the study of microplastics...     

Woody plant encroachment following grazing abandonment in the subalpine belt: a case study in northern Spain

Regional Environmental Change - The montane and subalpine belts in European mountains were affected by intense land use/land cover changes during the twentieth century. In the case of the subalpine...     

Multivariate Statistical Analysis of Meteorological and Air Pollution Data in the ‘Campo De Gibraltar’ Region, Spain

A complete statistical analysis of meteorological and air pollution data was carried out in the ‘Campo de Gibraltar’ region (in the South of Spain) from 1999 to 2002. This is a heavy industrialized area where, up to date, very few air pollution studies have been made. The main objectives of the study presented here have been the characterization of the meteorological and (gaseous and particulate) air pollution conditions in the area, and the relations between them. Multivariate statistical techniques, such as Principal Component Analysis (PCA), have been applied to the data. The results show that air quality in the area is highly dependent on meteorological conditions such as wind persistence and direction, dispersion capability of the atmosphere, and humidity content. On average, sulphur dioxide and nitrogen oxide air pollution, mainly caused by fuel-oil combustion and traffic, respectively, is not very high. However, an important number of exceedences of the limits established by the EU Directive 1999 for PM10 (particulate matter with a diameter less than 10 μm) have been observed in some points of the area. A significant percentage of these exceedences (about 22% on average) are likely caused by African dust intrusions, which usually take place from May to August. From gaseous and particulate air correlations, it seems that anthropogenic activities contribute with about 19% on average.     

Heavy and trace metal concentrations in three rockpool shrimp species (Palaemon elegans, Palaemon adspersus and Palaemon serratus) from Tenerife (Canary Islands)

Trace metal concentrations (Fe, Cu, Co, Zn, Ni and V) were investigated in three rockpool shrimp species (Palaemon elegans, Palaemon adspersus and Palaemon serratus) from six littoral sampling sites (polluted and non-polluted) of Tenerife in the Canary Islands (Central Eastern Atlantic), Spain. Sex ratio for all three species has been determined: females predominate over males in all species and significant differences in total length and cephalothorax length was detected between sexes, being females larger than males. By other side, concentrations of trace metals were determined in whole specimens. Higher mean values for every metal were observed in P. adspersus. In males, higher values were observed in P. elegans and P. serratus, whereas in P. adspersus, mean values are higher in females. Finally, mean concentrations of trace metals studied were higher, in general terms, in the two clearly polluted stations: Santa Cruz of Tenerife commercial harbour and its fishery dock dependency.     

The use of artificial neural networks to forecast biological atmospheric allergens or pathogens only as Alternaria spores

The monitoring of atmospheric Alternaria spores is of major importance due to their adverse effects on crops and their role as human allergens. Most species act as plant pathogens, prompting considerable economic losses worldwide on important crops such as potato, tomato or wheat. Fungal spores can also have serious detrimental effects on human health, triggering respiratory diseases and allergenic processes. The aim of this study was not only to examine the relationship between the atmospheric Alternaria spore content and the prevailing meteorological parameters, but also to predict the atmospheric Alternaria spore content in the Northwest Spain using a novel data analysis technique, ANNs (Artificial Neural Networks). A Hirst-type LANZONI VPPS 2000 volumetric 7-day recording sampler was used to collect the airborne spores from 1997 to 2008. Neural networks provided us with a good tool for forecasting Alternaria airborne spore concentration, and thus could help the automation of the prediction system in the aerobiological information diffusion to the population suffering from allergic problems or the prevention of considerable economic worldwide losses on important crops. Our proposed model would be applied to different geographical areas; nevertheless, the adjustment of the model, by using the available and adequate variables, would be realised in each case.     

Brooding of the sub-Antarctic heart urchin, <Emphasis Type="Italic">Abatus cavernosus</Emphasis> (Spatangoida: Schizasteridae), in southern Patagonia

The reproductive cycle of the sub-Antarctic spatangoid sea urchin, Abatus cavernosus, was examined during a 2-year period in southern Patagonia, Argentina. The population studied is the northernmost known coastal population in the austral oceans, and is influenced by a greater annual range of seawater temperature than other Abatus species. The sex ratio of the overall A. cavernosus population did not differ significantly from 1:1, but was not homogeneous across size classes. A clearly defined annual reproductive cycle was found. Spawning occurred from May to July and was synchronous between sexes. Females were observed to be brooding within a 9-month period, from May to February. Juveniles were released during the austral summer, from January to February. The length at which 50% of the females were brooding occurred at a test length of 25.9 mm. A. cavernosus had a large egg size (mean diameter = 1.4 mm) and low fecundity (maximum = 57 eggs per female) compared to closely related species. The number of eggs within each brood pouch was highest in larger anterior brood pouch, which is close to two gonopores, as opposed to the other anterior and two smaller posterior pouches. Significant interannual variation was observed in gonad cycles, fecundity, and embryo development such as: brood size decreased during 2001; adjusted gonad dry weight and fecundity were higher during 2003. Hypotheses concerning the gonadal and brooding cycles and fecundity of sub-Antarctic and Antarctic Schizasteridae are discussed. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.