Formation of PCDD/Fs in the sintering process: role of the grid-Cr2O3 catalyst in the de novo synthesis

The sintering process is among the major sources of the very toxic polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) in the environment. At the industrial scale, it has been shown that dust collected on the grid, which supports the feed, contains PCDD/Fs amounts between the values found in the bottom of the cake and the values found on dust collected during gas sampling in the wind boxes. This fact suggests that the grid, containing 25wt.% of chromium, could have a catalytic activity in PCDD/Fs formation during the sintering process. This research tries to study this potential role. The de novo synthesis of PCDD/Fs is simulated at laboratory scale by thermal treatments of samples mixed with grid filings or Cr2O3. The thermal experiments performed with E.S.P. dust (dust collected in the electrostatic precipitator of a sintering plant) or graphite mixed with grid filings do not allow to confirm a role of the grid in PCDD/Fs formation during the industrial process. On the other hand, it has been shown that Cr2O3 can be considered as a catalyst in the de novo synthesis of PCDD/Fs. This compound takes place in the two steps of the de novo synthesis: the degradation of the carbon matrix as well as the chlorination reactions.     

Selection of an electrolyte to enhance the electrochemical decolourisation of indigo. Optimisation and scale-up

The investigation presented here focussed on the electrochemical decolourisation of a commercial, textile indigo dye, in an undivided electrochemical cell using graphite electrodes. The decolourisation values obtained employing halide salts--sodium chloride, potassium bromide and potassium iodide--and a reductive agent--sodium meta-bisulphite--as electrolytes are higher than those attained when no electrolyte was used. The highest decolourisation value at a low level of electric power consumption was obtained with sodium chloride. Besides, this electrolyte is usually found in the coloured wastewaters of textile industry. Thus, a detailed study was carried out to determine the influence of electrolyte--sodium chloride--and dye concentration on the efficiency of the process expressed in terms of energy consumption and extension of the decolourisation reaction. The scale-up of the treatment with sodium chloride was satisfactorily tested in a 20 l cell.     

Results and evaluation of the first study of organochlorine contaminants (PCDDs, PCDFs, PCBs and DDTs), heavy metals and metalloids in birds from Baja California, México

Organochlorine compounds (OCs) including polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), polychlorinated biphenyls (PCBs) and 1,1-dichloro-2,2-bis(p-chlorophenyl)ethylene (p-p'-DDE), heavy metals (Pb, Cd, Zn, Cu), and arsenic were measured in house sparrows (Passer domesticus) and common ground doves (Columbina passerina) from Baja California Sur, México. Concentrations of PCDD/Fs were low, with 21 pg/g for house sparrows, and 7.7 pg/g for common ground doves. Non-ortho-PCB concentrations in house sparrow and common ground doves were 58 and 254 pg/g, respectively, and are within the highest concentrations reported in species that are in the low levels of food webs. The major differences in organochlorine levels between species were found for ortho-PCBs and DDTs. ortho-PCB levels were higher in the seedeater species, whereas DDT levels were higher in the omnivorous species. Heavy metal levels were far below those associated with negative effects.     

Temporal trends of organochlorine contamination in Black Guillemots in Iceland from 1976 to 1996

The levels of several different persistent organochlorines (OCs) in Black Guillemots Cepphus grylle, collected during the summers of 1976-1996 at Breioafj?rour in W-Iceland, were investigated. The levels of about 40 different organochlorines (PCBs, DDTs, chlordanes, toxaphenes, HCH, HCB) were compared with respect to age, sex, fat content, and year of collection. The levels of PCBs correlated very closely with those of DDE, indicating long-range transport as the major source of these contaminants in Iceland, with the ratio PCBs/DDE mostly in the range of 2-5. Unlike the Gyrfalcon Falco rusticolus, the organochlorine levels did not seem to accumulate substantially with age, neither in males nor females. The variation in the levels of OCs at the age of 2 years was even greater than the variation in OC levels over an age range of 12 years. In immature birds the levels of PCBs, DDE, HCB and beta-HCH declined very slowly (T(1/2) from 12 to 20 years) over the years 1976-1996, whereas the levels of alpha-HCH and p,p'-DDT declined much faster. The levels of trans-nonachlor, alpha-chlordane, gamma-chlordane, oxychlordane, and toxaphene did not correlate with the year of collection. As the Black Guillemot is mostly a resident seabird, feeding mainly on small fish and invertebrates, this investigation should give a good indication of the temporal trends of organochlorine pollution at Breioafj?rour, Iceland, during this 20 year period and is likely to reflect baseline trends in the marine environment of the North-Atlantic Ocean.     

Influence of pre-treatment step on PAHs analyses in contaminated soils

There is no specific standardization for the pre-treatment of a soil sample for PAHs analyses. The ISO/FDIS 14507 method for soil quality gives a guidance for sample pre-treatment before measurement of organic contaminants in soil. It refers to cryogenic crushing which is not so easy to carry out. So, analysts lead to develop in house methods which can be very different from a laboratory to another and can involve deviations in the pollution quantification. This study has explored different ways of drying, grinding and sieving in order to determine the influence of the soil sample handling on the measured pollutant concentration. It appears that the influence of pre-treatment depends on the soil nature and on the PAHs distribution. As a conclusion, it is advised "light" drying ways like air drying or drying at 40 degrees C in a drying oven instead of more "drastic" ways (freeze-drying, cryogenic crushing) which can induce some losses. Crushing and sieving are also recommended for more reproducible measures.     

Are N and S deposition altering the mineral composition of Norway spruce and Scots pine needles in Finland?

Data from a large-scale foliar survey were used to calculate the extent to which N and S deposition determined the mineral composition of Scots pine and Norway spruce needles in Finland. Foliar data were available from 367 needle samples collected on 36 plots sampled almost annually between 1987 and 2000. A literature study of controlled experiments revealed that acidifying deposition mediates increasing N and S concentrations, and decreasing Mg:N and Ca:Al ratios in the needles. When this fingerprint for N and S elevated deposition on tree foliage was observed simultaneously with increased N and S inputs, it was considered sufficient evidence for assuming that acidifying deposition had altered the mineral composition of tree needles on that plot in the given year. Evidence for deposition-induced changes in the mineral composition of tree foliage was calculated on the basis of a simple frequency model. In the late eighties the evidence was found on 43% of the Norway spruce and 27% of Scots pine plots. The proportion of changed needle mineral composition decreased to below 8% for both species in the late nineties.     

Photo-Fenton-assisted ozonation of p-Coumaric acid in aqueous solution

The degradation of p-Coumaric acid present in olive oil mill wastewater was investigated as a pretreatment stage to obtain more easily biodegradable molecules, with lower toxicity that facilitates subsequent anaerobic digestion. Thus, photo-Fenton-assisted ozonation has been studied and compared with ozonation at alkaline pH and conventional single ultraviolet (UV) and acid ozonation treatments. In the combined process, the overall kinetic rate constant was split into various components: direct oxidation by UV light, direct oxidation by ozone and oxidation by hydroxyl radicals. Molecular and/or radical ozone reaction was studied by conducting the reaction in the presence and absence of tert-butylalcohol at pHs 2, 7 and 9. Ozone oxidation rate increases with pH or by the addition of Fenton reagent and/or UV radiation due to generation of hydroxyl radicals, *OH. Hydrogen peroxide and ferrous ion play a double role during oxidation since at low concentrations they act as initiators of hydroxyl radicals but at high concentrations they act as radical scavengers. Finally, the additional levels of degradation by formation of hydroxyl radicals have been quantified in comparison to the conventional single processes and an equation is proposed for the reaction rate as a function of studied operating variables.     

Use of the aquatic lichen Dermatocarpon luridum as bioindicator of copper pollution: accumulation and cellular distribution tests

Laboratory experiments were conducted to investigate the potential use of the aquatic lichen Dermatocarpon luridum as bioindicator of copper pollution. Lichen thalli were exposed to 0.00, 0.25, 0.50, 0.75 and 1.00 mM copper in synthetic freshwater to solve the problems of metal bioavailability. The mineral composition of this media was prepared so that it corresponded to the ion composition of natural waters in D. luridum ecosystems. Sequential elution procedures using NiCl2 or Na2-EDTA (20 mM) were used to determine the distribution of metals at different cellular sites. The copper concentration extracted from thalli was correlated with pollution intensity, the greater correlation being with the Na2-EDTA extractant. The malondialdehyde concentration in thalli can be used as indicator of copper pollution; however, similar membrane degradation was observed for 0.25 and 0.50 mM copper and for 0.75 and 1.00 mM copper.     

Anaerobic PAH degradation in soil by a mixed bacterial consortium under denitrifying conditions

Polycyclic aromatic hydrocarbons (PAHs) are one of the main classes of contaminants in the terrestrial environment. Concentrations of biphenyl, fluorene, phenanthrene and pyrene were added to soil samples in order to investigate the anaerobic degradation potential of PAHs under denitrifying conditions. A mixed population of microorganisms obtained from a paddy soil was incubated for 20 days in anaerobic conditions in the presence of soil alone or with nitrate, adding, as electron donors, PAHs and, in some samples, glucose or acetate. At regular time intervals oxidation-reduction potential, PAHs concentration, microbial ATP and nitrate concentration into the solution were measured. Degradation trends for each hydrocarbon are similar under all conditions, indicating that the molecular conformation prevails over other parameters in controlling the degradation. Poor degradation results were obtained when PAHs were the only organic matter available for the inoculum, thus confirming the recalcitrance to degradation of these compounds. Biodegradation was influenced by the addition of other carbon sources. As better degradation results were generally obtained when acetate or glucose were added, the hypothesis of a co-metabolic enhancement of PAH biodegradation seems likely. Thus, anaerobic biodegradation of PAHs studied, biphenyl, fluorene, phenanthrene and pyrene, seems to be possible both through fermentative and respiratory metabolism, provided that low molecular weight co-metabolites and suitable electron acceptors (nitrate) are present.     

Interpretation of heavy metal data from mussel by use of multivariate classification techniques

Different strategies of multivariate analysis of metals concentrations (Mn, Fe, Ni, V, Co, Cu, Cd, Hg, Pb, Na, K) in mussel samples from different spanish markets are used to interpret a data base and identify differences between species and origin of the samples. Principal Component Analysis and Potential curves are applied to properly classify unknown samples from representative mussels samples (Mytilus edulis and Perna canaliculus). Also, Principal Components Analysis is used as display method to visualize the relation between the variables and objects of interest.