Understanding the fate and transport of petroleum hydrocarbons from coal tar within gasholders

Coal tars have been identified as posing a threat to human health due to their toxic, mutagenic and carcinogenic characteristics. Workers involved in former gasholders decommissioning are potentially exposed to relevant concentrations of volatile and semi-volatile hydrocarbons upon opening up derelict tanks and during tar excavation/removal. While information on contaminated sites air-quality and its implications on medium-long term exposure is available, acute exposure issues associated with the execution of critical tasks are less understood. Calculations indicated that the concentration of a given contaminant in the gasholder vapour phase only depends on the coal tar composition, being only barely affected by the presence of water in the gasholder and the tar volume/void space ratio. Fugacity modelling suggested that risk-critical compounds such as benzene, naphthalene and other monocyclic and polycyclic aromatic hydrocarbons may gather in the gasholder air phase at significant concentrations. Gasholder emissions were measured on-site and compared with the workplace exposure limits (WELs) currently in use in UK. While levels for most of the toxic compounds were far lower than WELs, benzene air-concentrations where found to be above the accepted threshold. In addition due to the long exposure periods involved in gasholder decommissioning and the significant contribution given by naphthalene to the total coal tar vapour concentration, the adoption of a WEL for naphthalene may need to be considered to support operators in preventing human health risk at the workplace. The Level I fugacity approach used in this study demonstrated its suitability for applications to sealed environments such as gasholders and its further refining could provide a useful tool for land remediation risk assessors.     

Design considerations for environmental sustainability in high density development: a case study of Hong Kong

This study has indicated that there is close relationship between development density and environmental quality; therefore, it is necessary to decide the form of development carefully beforehand. The form of development is shaped either by new development or urban renewal which is a major tactic nowadays adopted by the Hong Kong Government to improve the living condition of the citizens and the quality of the built environment. This study is limited to urban renewal and aims to find out the major urban design considerations for sustaining the environment. Through a questionnaire survey carried out in Hong Kong, the opinions of architects, planners, property development managers, and local citizens were sought and evaluated, and critical design factors for enhancing environmental sustainability of urban renewal projects are highlighted. The results derived from factor analysis indicated that certain design considerations should be incorporated for sustaining the urban environment. “Land Use Planning”, “Quality of Life”, “Conservation & Preservation”, “Integrated Design”, “Provision of Welfare Facilities”, and “Conservation of Existing Properties” were believed to be the significant underlying factors for achieving environmental sustainability of local urban renewal projects. Readers should send their comments on this paper to: BhaskarNath@aol.com within 3 months of publication of this issue.     

Levels of PCDD/F in adipose tissue on non-occupationally exposed subjects living near a hazardous waste incinerator in Catalonia, Spain

The potential adverse effects on human health of hazardous waste incinerators (HWIs) are a subject of concern. The construction of the first and till now only HWI in Spain finished in 1999. In 2007, after approximately 9 years of regular operations in the facility, the concentrations of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/F) were determined by HRGC/HRMS in samples of adipose tissue of 15 autopsied subjects living in the area under potential impact of the HWI (Constantí, Tarragona County, Catalonia). These data were compared with the levels found in two previous surveys performed in 1998 (baseline) and 2002. The current mean PCDD/F concentration in adipose tissue was 14.6 pg WHO-TEQ/g of fat (range: 3.3–55.4 pg WHO-TEQ/g of fat). It means significant changes (a reduction of 64% and an increase of 47%) in the mean PCDD/F levels in comparison to those found in 1998 and 2002: 40.1 and 9.9 pg WHO-TEQ/g of fat, respectively. Women showed higher levels of PCDD/F than men (23.8 vs 11.2 pg WHO-TEQ/g of fat). The increase in the last 5 years would not be directly attributable to exposure to PCDD/F emitted by the HWI, as other biological monitors such as human plasma and milk decreased during the same period.     

The food-print of Paris: long-term reconstruction of the nitrogen flows imported into the city from its rural hinterland

Between the tenth and twentieth century the population of Paris city increased from a few thousand to near 10 million inhabitants. In response to the growing urban demand during this period, the agrarian systems of the surrounding rural areas tremendously increased their potential for commercial export of agricultural products, made possible by a surplus of agricultural production over local consumption by humans and livestock in these areas. Expressed in terms of nitrogen, the potential for export increased from about 60 kg N/km2/year of rural territory in the Middle Ages, to more than 5,000 kg N/km2/year from modern agriculture. As a result of the balance between urban population growth and rural productivity, the rural area required to supply Paris (i.e. its food-print) did not change substantially for several centuries, remaining at the size of the Seine watershed surrounding the city (around 60,000 km2). The theoretical estimate of the size of the supplying hinterland at the end of the eighteenth century is confirmed by the figures deduced from the analysis of the historical city toll data (octroi). During the second half of the twentieth century, the ‘food-print’ of Paris reduced in size, owing to an unprecedented increase in the potential for commercial export associated with modern agricultural systems based on chemical N fertilization. We argue that analysing the capacity of territories to satisfy the demand for nitrogen-containing food products of local or distant urban population and markets might provide new and useful insights when assessing world food resource allocation in the context of increasing population and urbanization.     

Acid generation upon thermal concentration of natural water: The critical water content and the effects of ionic composition

Thermal evaporation of a variety of simulated pore waters from the region of Yucca Mountain, Nevada, produced acidic liquids and gases during the final stages of evaporation. Several simulated pore waters were prepared and then thermally distilled in order to collect and analyze fractions of the evolved vapor. In some cases, distillates collected towards the end of the distillation were highly acidic; in other cases the pH of the distillate remained comparatively unchanged during the course of the distillation. The results suggest that the pH values of the later fractions are determined by the initial composition of the water. Acid production stems from the hydrolysis of magnesium ions, especially at near dryness. Near the end of the distillation, magnesium nitrate and magnesium chloride begin to lose water of hydration, greatly accelerating their thermal decomposition to form acid. Acid formation is promoted further when precipitated calcium carbonate is removed. Specifically, calcium chloride-rich pore waters containing moderate (10–20 ppm) levels of magnesium and nitrate and low levels of bicarbonate produced mixtures of nitric and hydrochloric acid, resulting in a precipitous drop in pH to values of 1 or lower after about 95% of the original volume was distilled. Waters with either low or moderate magnesium content coupled with high levels of bicarbonate produced slightly basic fractions (pH 7–9). If calcium was present in excess of bicarbonate, waters containing moderate levels of magnesium produced acid even in the presence of bicarbonate, due to the precipitation of calcium carbonate. Other salts such as halite and anhydrite promote the segregation of acidic vapors from residual basic solids. The concomitant release of wet acid gas has implications for the integrity of the alloys under consideration for containers at the Yucca Mountain nuclear waste repository. Condensed acid gases at very low pH, especially mixtures of nitric and hydrochloric acid, are capable of corroding even alloys, such as nickel-based Alloy 22, which are considered to be corrosion-resistant under milder conditions.     

Binding of polycyclic aromatic hydrocarbons by humic acids formed during composting

Binding of two model polycyclic aromatic hydrocarbons (PAHs), phenanthrene and pyrene, by humic acids (HAs) isolated from an organic substrate at different stages of composting and a soil was investigated using a batch fluorescence quenching method and the modified Freundlich model. With respect to soil HA, the organic substrate HA fractions were characterized by larger binding affinities for both phenanthrene and pyrene. Further, isotherm deviation from linearity was larger for soil HA than for organic substrate HAs, indicating a larger heterogeneity of binding sites in the former. The composting process decreased the binding affinity and increased the heterogeneity of binding sites of HAs. The changes undergone by the HA fraction during composting may be expected to contribute to facilitate microbial accessibility to PAHs. The results obtained also suggest that bioremediation of PAH-contaminated soils with matured compost, rather than with fresh organic amendments, may result in faster and more effective cleanup.     

Cd-tolerant Suillus luteus: A fungal insurance for pines exposed to Cd

Soil metal pollution can trigger evolutionary adaptation in soil-borne organisms. An in vitro screening test showed cadmium adaptation in populations of Suillus luteus (L.: Fr.) Roussel, an ectomycorrhizal fungus of pine trees. Cadmium stress was subsequently investigated in Scots pine (Pinus sylvestris L.) seedlings inoculated with a Cd-tolerant S. luteus, isolated from a heavy metal contaminated site, and compared to plants inoculated with a Cd-sensitive isolate from a non-polluted area. A dose-response experiment with mycorrhizal pines showed better plant protection by a Cd-adapted fungus: more fungal biomass and a higher nutrient uptake at high Cd exposure. In addition, less Cd was transferred to aboveground plant parts. Because of the key role of the ectomycorrhizal symbiosis for tree fitness, the evolution of Cd tolerance in an ectomycorrhizal partner such as S. luteus can be of major importance for the establishment of pine forests on Cd-contaminated soils.     

Fate of pharmaceuticals and personal care products in wastewater treatment plants - Conception of a database and first results

We created a database in order to quantitatively assess the occurrence and removal efficiency of pharmaceuticals and personal care products (PPCPs) in wastewater treatment plants (WWTPs). From 117 scientific publications, we compiled 6641 data covering 184 PPCPs. Data included the concentrations of PPCPs in WWTP influents and effluents, their removal efficiency and their loads to the aquatic environment. The first outputs of our database allowed to identify the most investigated PPCPs in WWTPs and the most persistent ones, and to obtain reliable and quantitative values on their concentrations, frequency of detection and removal efficiency in WWTPs. We were also able to compare various processes and pointed out activated sludge with nitrogen treatment and membrane bioreactor as the most efficient ones.     

An assessment of indoor air quality in recent Mexican immigrant housing in Commerce City, Colorado

An indoor air quality assessment was conducted on 100 homes of recent Mexican immigrants in Commerce City, Colorado, an urban industrial community north of Denver. Head of households were administered a family health survey, filled out an activity diary, and participated in a home inspection. Carbon monoxide (CO) and carbon dioxide (CO₂) were measured for 24 h inside the main living area and outside of the homes. Harvard Impactors were used to collect 24-h samples of PM_2.5 at the same locations for gravimetric analysis. Dust samples were collected by vacuuming carpeting and flooring at four locations within the home and analyzed by ELISA for seven allergens. Mean indoor and outdoor PM_2.5 levels were 27.2 and 8.5 μg m⁻³, respectively. Indoor PM_2.5 and CO₂ were elevated in homes for which the number of hours with door/window open was zero compared to homes in which the number of hours was high (>15 h). Indoor PM_2.5 levels did not correlate with outdoor levels and tended to increase with number of inhabitants, and results indicate that the source of indoor particles were occupants and their activities, excluding smoking and cooking. Mean indoor CO₂ and CO levels were 1170 and 2.4 ppm, respectively. Carbon monoxide was higher than the 24-h National Ambient Air Quality Standard in 3 of the homes. The predominant allergens were cat (Fel d 1) and mouse (Mus m 1) allergens, found in 20 and 34 homes, respectively.