Removal of formaldehyde over MnxCe1-xO2 catalysts: Thermal catalytic oxidation versus ozone catalytic oxidation

MnxCe1- xO2（x： 0.3–0.9） prepared by Pechini method was used as a catalyst for the thermal catalytic oxidation of formaldehyde（HCHO）. At x = 0.3 and 0.5, most of the manganese was incorporated in the fluorite structure of Ce O2 to form a solid solution. The catalytic activity was best at x = 0.5, at which the temperature of 100% removal rate is the lowest（270°C）. The temperature for 100% removal of HCHO oxidation is reduced by approximately 40°C by loading 5 wt.% Cu Oxinto Mn0.5Ce0.5O2. With ozone catalytic oxidation, HCHO（61 ppm） in gas stream was completely oxidized by adding 506 ppm O3 over Mn0.5Ce0.5O2 catalyst with a GHSV（gas hourly space velocity） of 10,000 hr-1at 25°C. The effect of the molar ratio of O3 to HCHO was also investigated. As O3/HCHO ratio was increased from 3 to 8, the removal efficiency of HCHO was increased from 83.3% to 100%. With O3/HCHO ratio of 8, the mineralization efficiency of HCHO to CO2 was 86.1%. At 25°C, the p-type oxide semiconductor（Mn0.5Ce0.5O2） exhibited an excellent ozone decomposition efficiency of 99.2%,which significantly exceeded that of n-type oxide semiconductors such as Ti O2, which had a low ozone decomposition efficiency（9.81%）. At a GHSV of 10,000 hr-1, [O3]/[HCHO] = 3 and temperature of 25°C, a high HCHO removal efficiency（≥ 81.2%） was maintained throughout the durability test of 80 hr, indicating the long-term stability of the catalyst for HCHO removal.     

Participation in the design of performance management systems: a quasi‐experimental field study

In the literature on the relationship between participation in decision making and performance, a tell‐and‐sell strategy is considered a viable alternative to participation. In contrast, we argue that in organizational settings, when a sensitive and important issue is at stake, participation of a form to be characterized as formal, long term, direct, and with a high degree of participant influence is more effective than a tell‐and‐sell strategy. Using a quasi‐experimental design with a participation, a tell‐and‐sell, and a control condition, a ProMES performance management system was implemented in the field service department of a Dutch supplier of photocopiers. Outcome feedback to individual technicians resulted in an average performance increase in the participation condition that was significantly higher than the increase found in the tell‐and‐sell condition. Satisfaction with the program, and the perceived usefulness of the feedback, were significantly higher in the participation condition. In both experimental conditions, the performance increase was significant compared to the control condition. An explanation for these findings is discussed, as are implications for theory and practice. Copyright © 2004 John Wiley & Sons, Ltd.     

A STRATEGY FOR IMPLEMENTING BMPs FOR CONTROLLING NONPOINT SOURCE POLLUTION: THE CASE OF THE FEI‐TSUI RESERVOIR WATERSHED IN TAIWAN1

ABSTRACT: This paper describes a concerted effort by the Taiwan Water Resources Bureau, the City of Taipei, and the Bureau of Fei‐tsui Reservoir Management to protect the water quality in the Fei‐tsui Reservoir.The reservoir is the major source of water supply for over two million people in the metropolitan area of Taipei. Over the years the reservoir has suffered from siltation and more recently eutrophication. The sources of the pollution are traced to the hundreds of tea gardens, rice fields and other agricultural areas in the watershed and to urban sources such as construction sites. Large amounts of nutrients enter the reservoir by way of storm water runoff during storm or typhoon events. Since 1999, various agencies have worked to initiate an effort to reduce nonpoint pollution in the Fei‐Tsui Reservoir watershed. Practices being considered include nonstructural measures such as nutrient management, and structural measures such as swales, detention basins, and wetlands, in addition to erosion and sediment control methods. A number of field tests have been completed on the performance of selected best management practices (BMPs). A strategy for implementing the BMPs at the watershed scale has been developed based on a total maximum daily load (TMDL) analysis that is reported in this paper.     

The Adaptation for Conservation Targets (ACT) Framework: A Tool for Incorporating Climate Change into Natural Resource Management

As natural resource management agencies and conservation organizations seek guidance on responding to climate change, myriad potential actions and strategies have been proposed for increasing the long-term viability of some attributes of natural systems. Managers need practical tools for selecting among these actions and strategies to develop a tailored management approach for specific targets at a given location. We developed and present one such tool, the participatory Adaptation for Conservation Targets (ACT) framework, which considers the effects of climate change in the development of management actions for particular species, ecosystems and ecological functions. Our framework is based on the premise that effective adaptation of management to climate change can rely on local knowledge of an ecosystem and does not necessarily require detailed projections of climate change or its effects. We illustrate the ACT framework by applying it to an ecological function in the Greater Yellowstone Ecosystem (Montana, Wyoming, and Idaho, USA)-water flows in the upper Yellowstone River. We suggest that the ACT framework is a practical tool for initiating adaptation planning, and for generating and communicating specific management interventions given an increasingly altered, yet uncertain, climate.     

Advancing climate compatible development: lessons from southern Africa

Climate compatible development (CCD) has emerged as a new concept that bridges climate change adaptation, mitigation and community-based development. Progress towards CCD requires multi-stakeholder, multi-sector working and the development of partnerships between actors who may not otherwise have worked together. This creates challenges and opportunities that require careful examination at project and institutional levels and necessitates the sharing of experiences between different settings. In this paper, we draw on the outcomes from a multi-stakeholder workshop held in Mozambique in 2012, the final in a series of activities in a regional project assessing emerging CCD partnerships across southern Africa. The workshop involved policymakers, researchers and representatives from NGOs and the private sector. We employ a content analysis of workshop notes and presentations to identify the progress and challenges in moving four case study countries (the Democratic Republic of the Congo, Mozambique, Zambia and Zimbabwe) towards CCD pathways, by exploring experiences from both project and policy levels. To advance institutional support for the development of successful CCD policies, practices and partnerships, we conclude that there is a need for: (a) institutional development at the national level to strengthen coordination and more clearly define roles and responsibilities across sectors, based on the identification of capacity and knowledge gaps; (b) partnership development, drawing on key strengths and competences of different stakeholders and emphasising the roles of the private sector and traditional authorities; (c) learning and knowledge-sharing through national and regional fora; and (d) development of mechanisms that permit more equitable and transparent distribution of costs and benefits. These factors can facilitate development of multi-stakeholder, multi-level partnerships that are grounded in community engagement from the outset, helping to translate CCD policy statements into on-the-ground action.     

Design to monitor trend in abundance and presence of American beaver (Castor canadensis) at the national forest scale

Wildlife conservationists design monitoring programs to assess population dynamics, project future population states, and evaluate the impacts of management actions on populations. Because agency mandates and conservation laws call for monitoring data to elicit management responses, it is imperative to design programs that match the administrative scale for which management decisions are made. We describe a program to monitor population trends in American beaver (Castor canadensis) on the US Department of Agriculture, Black Hills National Forest (BHNF) in southwestern South Dakota and northeastern Wyoming, USA. Beaver have been designated as a management indicator species on the BHNF because of their association with riparian and aquatic habitats and its status as a keystone species. We designed our program to monitor the density of beaver food caches (abundance) within sampling units with beaver and the proportion of sampling units with beavers present at the scale of a national forest. We designated watersheds as sampling units in a stratified random sampling design that we developed based on habitat modeling results. Habitat modeling indicated that the most suitable beaver habitat was near perennial water, near aspen (Populus tremuloides) and willow (Salix spp.), and in low gradient streams at lower elevations. Results from the initial monitoring period in October 2007 allowed us to assess costs and logistical considerations, validate our habitat model, and conduct power analyses to assess whether our sampling design could detect the level of declines in beaver stated in the monitoring objectives. Beaver food caches were located in 20 of 52 sampled watersheds. Monitoring 20 to 25 watersheds with beaver should provide sufficient power to detect 15–40% declines in the beaver food cache index as well as a twofold decline in the odds of beaver being present in watersheds. Indices of abundance, such as the beaver food cache index, provide a practical measure of population status to conduct long-term monitoring across broad landscapes such as national forests.     

Prenatal diagnosis of cystic fibrosis by methylumbelliferylguanidinobenzoate protease titration in amniotic fluid

Amniotic fluids were obtained from 19 mothers who had previously given birth to a child with cystic fibrosis. Measurement of methylumbelliferyl guanidinobenzoate (MUGB) reactive proteases suggested that all 19 would have unaffected babies. Amongst the first 10 cases to come to term there were 5 infants with cystic fibrosis. It is concluded that MUGB protease titration is not suitable for the early prenatal diagnosis of cystic fibrosis.     

Distribution of 137Cs in soil along Ta-han River Valley in Tau-Yuan County in Taiwan

Environmental 137Cs contamination was suspected from accidents at spent fuel storage pits of a research reactor site in the Ta-han River valley in Taiwan. In order to further characterize this contamination, soil samples were collected and measured by a gamma-spectroscopy system in 1999. It was found that 137Cs contamination is distributed up to 4 km from the reactor in an area covered mostly by rice and plant fields. 137Cs concentration in the topsoil ranged up to about 1000 Bq kg-1, as compared with soil beyond the contaminated area, which does not exceed 15 Bq kg-1. Spatial distribution of 137Cs was characterized by strong non-uniformity, which complicated our understanding of the distribution pathway of the radionuclides. The highest concentrations of 137Cs, up to more than 1000 Bq kg-1, were found within a few rice fields. The relative location of these rice fields and the water supplies from local streams suggested that the 137Cs was distributed along water pathways in the valley.     

MANAGING TAIWAN'S RESERVOIR WATERSHEDS BY THE ZONING APPROACH1

ABSTRACT: For many years, a commonly used strategy for source water protection in Taiwan has been setting up arbitrary, fixed‐width buffer zones near sensitive waters, such as water‐supply reservoirs, and prohibiting any development in their watersheds. However, such regulations are now often viewed as infringing by the government on landowners' property rights, a situation that has led to citizen protests. This paper describes a proposed strategy that is water‐quality based and uses a quantitative zoning approach. A reservoir's watershed is divided into several zones beginning from the normal water line to the divide. Different levels of best management practices (BMPs) are required for controlling runoff pollution in different zones. The layout of the management zones is based on a number of factors such as reservoir classification, water quality conditions, and physical characteristics of the watershed. The goal of promoting such an approach is to try to balance the needs of watershed development and water quality protection. A case study using the Tapu Reservoir Watershed in Northern Taiwan as an example for illustrating the proposed zoning approach is presented.