Spatial distribution of natural radioactivity levels in topsoil around the high-uranium mineralization zone of Kylleng-Pyndensohiong (Mawthabah) areas, West Khasi Hills District, Meghalaya, India

A study of background radiation and the distribution of radionuclides in the environment of the proposed uranium mining sites of Kylleng-Pyndensohiong (Mawthabah) areas, West Khasi Hills District, Meghalaya, India, has been carried out with the objective of establishing a baseline radiation level of the region. Topsoil samples collected from the region are analysed for radioactivity measurements of primordial radionuclides by gamma-spectrometry technique. Direct dose measurement using a survey meter was also carried out simultaneously. Measurement carried out in the region shows that the activity concentration of (238)U and (232)Th in soil samples is found to be highest in Kylleng with respective median values of 335.3Bqkg(-1) and 283.9Bqkg(-1) followed by Syngkai with activity concentration of 285.3Bqkg(-1) and 257.4Bqkg(-1) for (238)U and (232)Th, respectively. The distribution of (40)K concentration in the study area is found to be in the range of 173.1-359.0Bqkg(-1) which is below the global and Indian average values of 420Bqkg(-1) and 394Bqkg(-1), respectively. The contribution of the primordial radionuclides to the total dose of the study area is found to be very high with a range of 136.8-334.5nGyh(-1) in comparison to the global as well as Indian average values.     

Management of Lignite Fly Ash for Improving Soil Fertility and Crop Productivity

Lignite fly ash (LFA), being alkaline and endowed with excellent pozzolanic properties, a silt loam texture, and plant nutrients, has the potential to improve soil quality and productivity. Long-term field trials with groundnut, maize, and sun hemp were carried out to study the effect of LFA on growth and yield. Before crop I was sown, LFA was applied at various doses with and without press mud (an organic waste from the sugar industry, used as an amendment and source of nutrients). LFA with and without press mud was also applied before crops III and V were cultivated. Chemical fertilizer, along with gypsum, humic acid, and biofertilizer, was applied in all treatments, including the control. With one-time and repeat applications of LFA (with and without press mud), yield increased significantly (7.0–89.0%) in relation to the control crop. The press mud enhanced the yield (3.0–15.0%) with different LFA applications. The highest yield LFA dose was 200 t/ha for one-time and repeat applications, the maximum yield being with crop III (combination treatment). One-time and repeat application of LFA (alone and in combination with press mud) improved soil quality and the nutrient content of the produce. The highest dose of LFA (200 t/ha) with and without press mud showed the best residual effects (eco-friendly increases in the yield of succeeding crops). Some increase in trace- and heavy-metal contents and in the level of γ-emitters in soil and crop produce, but well within permissible limits, was observed. Thus, LFA can be used on a large scale to boost soil fertility and productivity with no adverse effects on the soil or crops, which may solve the problem of bulk disposal of fly ash in an eco-friendly manner.     

Simulation-based optimization of in-stream structures design: rock vanes

We employ a three-dimensional coupled hydro-morphodynamic model, the Virtual Flow Simulator (VFS-Geophysics) in its Unsteady Reynolds Averaged Navier–Stokes mode closed with \(k-\omega\) model, to simulate the turbulent flow and sediment transport in large-scale sand and gravel bed waterways under prototype and live-bed conditions. The simulation results are used to carry out systematic numerical experiments to develop design guidelines for rock vane structures. The numerical model is based on the Curvilinear Immersed Boundary approach to simulate flow and sediment transport processes in arbitrarily complex rivers with embedded rock structures. Three validation test cases are conducted to examine the capability of the model in capturing turbulent flow and sediment transport in channels with mobile-bed. Transport of sediment materials is handled using the Exner equation coupled with a transport equation for suspended load. Two representative meandering rivers, with gravel and sand beds, respectively, are selected to serve as the virtual test-bed for developing design guidelines for rock vane structures. The characteristics of these rivers are selected based on available field data. Initially guided by existing design guidelines, we consider numerous arrangements of rock vane structures computationally to identify optimal structure design and placement characteristics for a given river system.     

Bioaccumulation of toxic metals (Cr, Cd, Pb and Cu) by seeds of Euryale ferox Salisb. (Makhana) W

The level of toxic metals Cr, Cd, Pb and Cu was determined in seeds, water and sediments collected from nine closed waterbodies of Darbhanga, north Bihar, used for cultivation of the edible aquatic macrophyte Euryaleferox Salisb. during harvesting season of the crop for two successive years (1996 and 1997). Seeds bioconcentrated appreciable amount of these toxic metals in the order Pb > Cr > Cu > Cd. The increased load of metal pollution due to domestic and municipal discharges threatened the habitats of the plant. The toxic metal contents in seeds were found positively correlated with the ambient concentration of metals in water and sediments. The importance of these findings has been discussed for national water resource economy of the country and human health perspectives.     

Geochronology of Pb and Hg pollution in a coastal marine environment using global fallout 137Cs

Global fallout 137Cs was used for dating sediment cores and estimation of recent sedimentation rates (up to 1 cm/y) in the Thane Creek, which lies in the southern part of the Deccan belt of India. The residence time of 210Pb in the Thane Creek water was calculated to be 0.7 years. Further, the concentrations of Pb (up to 70 microg/g) and Hg (up to 10 microg/g) in sediment profiles were measured to assess the anthropogenic input of contaminants due to large-scale industrialization, which has taken place in this area over the last two decades. The depth-wise concentration profile of Hg shows positive evidence of continued fresh input into the Creek.     

Rural energy transitions in developing countries: a case of the Uttam Urja initiative in India

In most developing countries, at the household level, traditional burning of biomass or use of inefficient technologies for domestic applications like lighting is common, triggering concerns related to fuel or technology switching. The paper focuses on opportunities to promote cleaner energy options through development of value chains delivering improved energy efficiency and access in developing countries. We discuss the example of Uttam Urja, a field project involving the dissemination of photovoltaic lighting technologies in rural areas of India. We focus on the challenges of introducing radical innovations into the residential energy sector in developing countries. For the purpose of this paper the Uttam Urja project is conceptualized as an ‘experiment’ and analysed using the Strategic Niche Management (SNM) framework. The paper emphasizes that to effect socio-technical transitions to clean energy options on the ground, it is desirable to focus on technology customization and innovative financing to cater to the needs and concerns of end users.     

Sulfide oxidation in fluidized bed bioreactor using nylon support material

A continuous fluidized bed bioreactor (FBBR) with nylon support particles was used to treat synthetic sulfide wastewater at different hydraulic retention time of 25, 50 and 75 min and upflow velocity of 14, 17 and 20 m/hr. The effects of upflow velocity, hydraulic retention time and reactor operation time on sulfide oxidation rate were studied using statistical model. Mixed culture obtained from the activated sludge, taken from tannery effluent treatment plant, was used as a source for microorganisms. The diameter and density of the nylon particles were 2-3 mm and 1140 kg/m³, respectively. Experiments were carried out in the reactor at a temperature of (30 ± 2)℃, at a fixed bed height of 16 cm after the formation of biofilm on the surface of support particles. Biofilm thickness reached (42 ± 3) μupm after 15 days from reactor start-up. The sulfide oxidation, sulfate and sulfur formation is examined at all hydraulic retention times and upflow velocities. The results indicated that almost 90%-92% sulfide oxidation was achieved at all hydraulic retention times. Statistical model could explain 94% of the variability and analysis of variance showed that upflow velocity and hydraulic retention time slightly affected the sulfide oxidation rate. The highest sulfide oxidation of 92% with 70% sulfur was obtained at hydraulic retention time of 75 min and upflow velocity of 14 m/hr.     

Atmospheric Dust Loads and Their Elemental Composition at a Background Site in India

Air particulate samples collected during 1995–96 ata background site situated on the east coast of Thar Desert inRajsthan State of India were analysed for atmospheric dustloads (Suspended Particulate Matter) and elemental composition.The values of SPM ranged from 9 g M^-3 to 97g M^-3 with an average of 43 g M^-3 except a fewepisodic values, which were 3 to 5 times higher than the averageduring summer months. The results for elemental composition ofthe particulate samples showed that the concentrations ofanthropogenic toxic trace elements viz. Br, Cr, Pb, Sb, Se and Znare lower by a factor of 2 to 10 as compared to urban areas. Thehigh enrichment factors for anthropogenic elements viz. Br, Pb,Sb and Zn show an input from coal/wood fuel burning andvehicular pollution at the sampling site. The depletion of Si inSPM samples shows long distance transport of dust to the samplingsite.     

Behaviour and fluxes of trace and toxic elements in creek sediment near Mumbai,India

Studies on marine sediments are extremely important since they act as ultimate sink of anthropogenic pollutants. The present study was conducted near Mumbai city of India to understand andassess the behaviour and fluxes of trace and toxic elements increek sediment. Seven sediment core samples were collected andanalysed for trace and toxic elements such as Fe, Cu, Pb, Zn, Rb and Sr in different sections of the core using EDXRF technique. The fluxes of the elements in each section of the core were calculated using the mass sedimentation rates derivedfrom ²¹⁰Pb dating technique and the sediment density at each location. The estimated depositional fluxes of Fe, Rb and Sr in Zone-1 and Zone-3 are in the ranges of 0.4–0.5% cm^-2yr^-1; 4–6 g cm^-2 yr^-1 and 10–20 g cm^-2 yr^-1 respectively, where as they were about 3–4 times higher in zone-2 for the same elements. The depositionalfluxes of elements Cu (40–60 g cm^-2 yr^-1), Zn (35–43 g cm^-2 yr^-1) and Pb (6–12 g cm^-2 yr^-1) were also found to be higher in zone-2 compared tozone-1 and zone-3 which can be attributed to the release from thenewly developed chemical zone of Thane-Belapur industrial belt.