Determination of arsenic in grain and soil by hydride nondispersive atomic fluorescence method

Quantity of trace arsenic in grain and soil was determined by hydride nondispersive atomic fluorescence method.Optimum conditions of measurement were selected in the experiment including the pH of the medium, reductive agent, the concentration and flowing velocity of KBH4, rate of carrier gas and atomized temperature. The reference sample of rice C was determined and the linear relationship of the calibration curve was plotted, indicating that the method was highly precise. In the experiment of recovery rate, the method was quite satisfactory.Based on the determination of hundreds of samples, it is proved that atomic fluorescence method is rapid, sensitive and low in interference. It is very efficient on determination of trace arsenic in soils and grains, especially in grains.     

Heavy metals in water bodies purified by suspended substrate of rivers

ＩｎｔｒｏｄｕｃｔｉｏｎＨｅａｖｙｍｅｔａｌｓｉｎｗａｔｅｒｂｏｄｉｅｓａｒｅｓｉｇｎｉｆｉｃａｎｔｌｙｄｉｆｆｅｒｅｎｔｆｒｏｍｏｒｇａｎｉｃｐｏｌｌｕｔａｎｔｓｔｈａｔｃａｎｂｅｍｉｃｒｏｂｉｏｌｏｇｉｃａｌｌｙｄｅｇｒａｄｅｄｏｒｄｅｃｏｍｐｏｓｅｄ .Ｇｅｎｅｒａｌｌｙ ,ｔｈｅｙａｒｅｐｕｒｉｆｉｅｄｔｈｒｏｕｇｈｔｈｅｉｒａｄｓｏｒｐｔｉｏｎｏｎｔｏｓｕｓｐｅｎｄｅｄｓｕｂｓｔｒａｔｅｓｉｎｒｉｖｅｒｓ.Ａｄｓｏｒｐｔｉｏｎｏｆｈｅａｖｙｍｅｔａｌｓｏｎｒｉｖｅｒｓｕｓｐｅｎｄｅｄｓｕｂ…     

Preparation of rare-earth metal complex oxide catalysts for catalytic wet air oxidation

Catalytic wet air oxidation (CWAO) is one of the most promising technologies for pollution abatement. Developing catalysts with high activity and stability is crucial for the application of the CWAO process. The Mn/Ce complex oxide catalysts for CWAO of high concentration phenol-containing wastewater were prepared by coprecipitation. The catalyst preparation conditions were optimized by using an orthogonal layout method and single-factor experimental analysis. The Mn/Ce serial catalysts were characterized by Brunauer-Emmett-Teller (BET) analysis and the metal cation leaching was measured by inductively coupled plasma torch-atomic emission spectrometry (ICP-AES). The results show that the catalysts have high catalytic activities even at a low temperature (80°C) and low oxygen partial pressure (0.5 MPa) in a batch reactor. The metallic ion leaching is comparatively low (Mn<6.577 mg/L and Ce<0.6910 mg/L, respectively) in the CWAO process. The phenol, COD_Cr, and TOC removal efficiencies in the solution exceed 98.5% using the optimal catalyst (named CSP). The new catalyst would have a promising application in CWAO treatment of high concentration organic wastewater. Translated from Techniques and Equipment for Environmental Pollution Control, 2005, 6(2): 40–44 [译自: 环境污染治理技术与设备]     

纳米技术在环境保护中的应用

介绍了纳米技术在环境保护领域中的应用现状、存在问题和今后的研究方向。纳米光催化剂、纳米过滤技术和纳米级的水处理剂在水处理中有着广泛的应用;纳米级的汽车尾气净化催化剂和其它纳米催化剂在大气污染控制方面有着普通材料无法比拟的优势;纳米技术在噪声污染控制和环境监测等方面也有广泛的应用。但是,纳米技术同时也存在光催化时光利用率低、催化效率低、纳米功能材料工作条件要求高等问题。     

我国热带地区胶—茶—鸡农林复合系统物质循环研究

以海南省文昌市典型的胶—茶—鸡农林复合模式为研究对象 ,以单作胶园、胶茶间作园为对照 ,采用定量研究与定性分析相结合的方法 ,研究其物质循环规律。结果表明 ,胶—茶—鸡农林复合系统的氮、磷输入、输出量最大 ,系统外物质投入率比另两系统明显减少 ,系统内养分循环量增加 ,因此 ,该系统具有较合理的物质循环结构。     

Kinetics of continuous biodegradation of pesticide organic wastewater by activated carbon-activated sludge

１ＩｎｔｒｏｄｕｃｔｉｏｎＮｏｖｅｌｂｉｏｌｏｇｉｃａｌａｃｔｉｖａｔｅｄｃａｒｂｏｎａｎｄａｃｔｉｖａｔｅｄｓｌｕｄｇｅｓｙｓｔｅｍｈａｓｓｈｏｗｎｉｔｓｅｆｅｃｔｉｖｅａｂｉｌｉｔｙｔｏｒｅｄｕｃｅＣＯＤｉｎｔｏｘｉｃｏｒｇａｎｉｃｗａｓｔｅｗａ...     

LPWCO method for the treatment of high concentrated organic wastewater

Based on wet air oxidation (WAO) and Fenton reagent, thispaper raises a new low pressure wet catalytic oxidation(LPWCO)which requires low pressure for the treatment of highlyconcentrated and refractory organic wastewater. Compared withgeneral wet air oxidation, the pressure of the treatment(0.1-0.6MPa) is only one of tens to percentage of latter(3.5-10MPa). Inaddition, its temperature is no more than 180℃.Compared withFenton reagent, while H2O2/COD(weight ratio) less than 1.2, theremoval of COD in the treatment is over twenty percents more thanFenton's even the value of COD is more than 14000mg/L. In thispaper, we study the effect factor of COD removal and the mechanismof this treatment. The existence of synergistic effect (catalytic oxidation and carbonization) for COD removal in H2SO4-Fenton reagent system under the condition of applied pressure and heating (0.1-0.6MPa, 104-165℃) was verified. The best condition of this disposal are as follows:H2O2/COD(weight ratio)=0.2-1.0, Fe2+ 0.6×10-3 mol, H2SO4 0.5mol, COD>1×104mg/L, the operating pressure is 0.1-0.6MPa and temperature is 104-165℃. This method suit to dispose the high-concentrated refractory wastewater, especially to the wastewater containing H2SO produced in the manufacture of pesticide, dyestuff and petrochemical works.     

区域环评中废水排放量的预测方法研究

阐述了区域环评污染物排放源强的预测原则,对区域开发活动中废水量和COD排放量的预测方法作了详细论述,并以温州滨海新区环评为例作了实证研究.     

区域环境质量综合评价的一种方法——Fuzzy概率法

本文应用Fuzzy概率原理,在对区域环境内各单项污染指标进行分级评价的基础上,考虑各单项污染指标在总体中的权重,并综合各单项污染指标的作用,给出区域环境内环境“总”质量的综合评价。     

金属对催化还原DDT的降解产物及其反应机制的研究

本报告介绍DDT经金属对处理后降解产物的分析鉴定和有关反应机制的初步研究。 降解产物主要是用气相色谱—质谱联用分析鉴定的。水溶液中的DDT用Cu-Zn金属对还原其降解产物经鉴定是DDD、DDMS、DDE_t,它们是DDT分子脱去烷基碳原子上不同数目的氯原子的产物。而在Cu-Fe金属对作用下,水溶液中的DDT的还原则是同时得到四种不同类型的产物。它们是DDT脱去烷基碳原子上的1个和3个氯原子的DDD和DDE_t;DDT脱氯、氧化产物DBP和DBH;DDT脱去HCI生成的DDE;两个DDT分子二聚脱氯的产物TTTB和TTDB。 实验证明金属对对DDT的作用是催化还原反应,金属对起着催化剂和还原剂双重作用。通过实验结果对DDT在金属对作用下的反应机制进行了初步探讨。