Rapid and simple spectrophotometric determination of persulfate in water by microwave assisted decolorization of Methylene Blue

A rapid and simple method for determination of persulfate in aqueous solution was developed. The method is based on the rapid reaction of persulfate with Methylene Blue(MB) via domestic microwave activation, which can promote the activation of persulfate and decolorize MB quickly. The depletion of MB at 644 nm(the maximum absorption wavelength of MB) is in proportion to the increasing concentration of persulfate in aqueous solution. Linear calibration curve was obtained in the range 0–1.5 mmol/L, with a limit of detection of 0.0028 mmol/L. The reaction time is rapid(within 60 sec), which is much shorter than that used for conventional methods. Compared with existing analytical methods, it need not any additives, especially colorful Fe2+, and need not any pretreatment for samples, such as p H adjustment.     

Effect of six kinds of scale inhibitors on calcium carbonate precipitation in high salinity wastewater at high temperatures

Precipitation of calcium carbonate(Ca CO3) scale on heat transfer surfaces is a serious and expensive problem widely occurring in numerous industrial processes. In this study, we compared the scale inhibition effect of six kinds of commercial scale inhibitors and screened out the best one(scale inhibitor SQ-1211) to investigate its scale inhibition performance in highly saline conditions at high temperature through static scale inhibition tests. The influences of scale inhibitor dosage, temperature, heating time and p H on the inhibition efficiency of the optimal scale inhibitor were investigated. The morphologies and crystal structures of the precipitates were characterized by Scanning Electron Microscopy and X-ray Diffraction analysis. Results showed that the scale inhibition efficiency of the optimal scale inhibitor decreased with the increase of the reaction temperature. When the concentration of Ca2+was 1600 mg/L, the scale inhibition rate could reach 90.7% at 80°C at p H 8. The optimal scale inhibitor could effectively retard scaling at high temperature. In the presence of the optimal scale inhibitor, the main crystal structure of Ca CO3 changed from calcite to aragonite.     

IKK inhibition prevents PM2.5-exacerbated cardiac injury in mice with type 2 diabetes

Epidemiological studies have found that individuals with diabetes mellitus(DM) display an increased susceptibility for adverse cardiovascular outcomes when exposed to air pollution.This study was conducted to explore the potential mechanism linking ambient fine particles(PM2.5) and heart injury in a Type 2 DM(T2DM) animal model. The KKay mouse, an animal model of T2DM, was exposed to concentrated ambient PM2.5 or filtered air for 8 weeks via a versatile aerosol exposure and concentrator system. Simultaneously, an inhibitor of IκB kinase-2(IKK-a)(IMD-0354), which is a blocker of nuclear factor κB(NF-κB)nuclear translocation, was administrated by intracerebroventricular injection(ICV) to regulate the NF-êB pathway. The results showed that ambient PM2.5 induced the increase of, NF-êB, cyclooxygenase-2(COX-2) and mitogen activated protein kinase(MAPK) expression in cardiac tissue, and that IMD-0354 could alleviate the inflammatory injury. The results suggested that the NF-êB pathway plays an important role in mediating the PM2.5-induced cardiovascular injury in the T2DM model. Inhibiting NFκB may be a therapeutic option in air-pollution-exacerbated cardiovascular injury in diabetes mellitus.     

Mercury adsorption characteristics of HBr-modified fly ash in an entrained-flow reactor

In this study, the mercury adsorption characteristics of HBr-modified fly ash in an entrained-flow reactor were investigated through thermal decomposition methods. The results show that the mercury adsorption performance of the HBr-modified fly ash was enhanced significantly. The mercury species adsorbed by unmodified fly ash were HgCl₂, HgS and HgO. The mercury adsorbed by HBr-modified fly ash, in the entrained-flow reactor, existed in two forms, HgBr₂ and HgO, and the HBr was the dominant factor promoting oxidation of elemental mercury in the entrained-flow reactor. In the current study, the concentration of HgBr₂ and HgO in ash from the fine ash vessel was 4.6 times greater than for ash from the coarse ash vessel. The fine ash had better mercury adsorption performance than coarse ash, which is most likely due to the higher specific surface area and longer residence time.     

Ozone concentrations, flux and potential effect on yield during wheat growth in the Northwest-Shandong Plain of China

Ozone (O₃) concentration and flux (F_o) were measured using the eddy covariance technique over a wheat field in the Northwest-Shandong Plain of China. The O₃-induced wheat yield loss was estimated by utilizing O₃ exposure-response models. The results showed that: (1) During the growing season (7 March to 7 June, 2012), the minimum (16.1 ppbV) and maximum (53.3 ppbV) mean O₃ concentrations occurred at approximately 6:30 and 16:00, respectively. The mean and maximum of all measured O₃ concentrations were 31.3 and 128.4 ppbV, respectively. The variation of O₃ concentration was mainly affected by solar radiation and temperature. (2) The mean diurnal variation of deposition velocity (V_d) can be divided into four phases, and the maximum occurred at noon (12:00). Averaged V_d during daytime (6:00–18:00) and nighttime (18:00–6:00) were 0.42 and 0.14 cm/sec, respectively. The maximum of measured V_d was about 1.5 cm/sec. The magnitude of V_d was influenced by the wheat growing stage, and its variation was significantly correlated with both global radiation and friction velocity. (3) The maximum mean F_o appeared at 14:00, and the maximum measured F_o was − 33.5 nmol/(m²·sec). Averaged F_o during daytime and nighttime were − 6.9 and − 1.5 nmol/(m²·sec), respectively. (4) Using O₃ exposure-response functions obtained from the USA, Europe, and China, the O₃-induced wheat yield reduction in the district was estimated as 12.9% on average (5.5%–23.3%). Large uncertainties were related to the statistical methods and environmental conditions involved in deriving the exposure-response functions.     

Effect of AlCl3 concentration on nanoparticle removal by coagulation

In recent years, engineered nanoparticles, as a new group of contaminants emerging in natural water, have been given more attention. In order to understand the behavior of nanoparticles in the conventional water treatment process, three kinds of nanoparticle suspensions, namely multi-walled carbon nanotube-humic acid (MWCNT-HA), multi-walled carbon nanotube-N,N-dimethylformamide (MWCNT-DMF) and nanoTiO₂-humic acid (TiO₂-HA) were employed to investigate their coagulation removal efficiencies with varying aluminum chloride (AlCl₃) concentrations. Results showed that nanoparticle removal rate curves had a reverse “U” shape with increasing concentration of aluminum ion (Al^3 +). More than 90% of nanoparticles could be effectively removed by an appropriate Al^3 + concentration. At higher Al^3 + concentration, nanoparticles would be restabilized. The hydrodynamic particle size of nanoparticles was found to be the crucial factor influencing the effective concentration range (ECR) of Al^3 + for nanoparticle removal. The ECR of Al^3 + followed the order MWCNT-DMF > MWCNT-HA > TiO₂-HA, which is the reverse of the nanoparticle size trend. At a given concentration, smaller nanoparticles carry more surface charges, and thus consume more coagulants for neutralization. Therefore, over-saturation occurred at relatively higher Al^3 + concentration and a wider ECR was obtained. The ECR became broader with increasing pH because of the smaller hydrodynamic particle size of nanoparticles at higher pH values. A high ionic strength of NaCl can also widen the ECR due to its strong potential to compress the electric double layer. It was concluded that it is important to adjust the dose of Al^3 + in the ECR for nanoparticle removal in water treatment.     

反渗透深度处理乳品加工业二级处理废水试验研究

采用砂滤、活性炭吸附和反渗透组合工艺深度处理乳制品加工废水。深度处理后出水指标CODcr、TP和硬度分别达到10、1 mg以下和20 mg/L以下,经反渗透组合工艺深度处理后的乳制品加工废水可以达到锅炉补水,冷却循环水等水质要求。     

两种方法测定固定污染源废气中铅的对比研究

以石英纤维滤筒采样,采用硝酸-氢氟酸消解体系,建立了火焰原子吸收光谱法和电感耦合等离子体原子发射光谱法测定固定污染源废气中铅的分析方法。分别对两种方法的波长选择、干扰因素、标准曲线、检出限、准确度和精密度等方面进行了对比研究,并对两种方法的测定结果进行t检验。结果表明,两种方法无显著性差异,均可用于固定污染源废气中铅的含量测定。     

雅鲁河呼伦贝尔段大型底栖动物群落结构特征及水质生物学评价

在呼伦贝尔市境内雅鲁河流域设置12个点位采集大型底栖动物进行调查研究并对水质状况进行生物学评价。共采集到底栖动物24种,隶属于8目22科,其中水生昆虫19种,占总数79.2%,各点位种类不丰富。各点位优势种不同,但基本都以对水质敏感类群和中等耐污类群为主。各点位密度和生物量差异较大,底栖动物平均密度为89~493ind/m2,平均生物量为0.42~11.69g/m2。调查区域大型底栖动物以集食者和捕食者种类较多,分别为6种;各功能摄食类群分布受空间资源位的限制。Shannon-Wiener多样性指数评价结果为上游点位水质为轻-中污染型,下游点位水质为中-重污染型,BI指数评价结果显示除南大河水质为中度污染外,其余点位水质均为清洁。     

实施跨界水环境补偿的探讨——对《水污染防治行动计划》中“实施跨界水环境补偿”的解读

针对《水污染防治行动计划》提出"实施跨界水环境补偿"的要求,文章总结分析了国内外已开展的水环境补偿实践情况,表明实施水环境补偿对跨界水质改善具有较好作用;从宏观层面分析了在我国推广跨界水环境补偿面临的主要困境与问题,并从政策、资金等方面提出了相关建议,为下阶段我国推广实施跨界水环境补偿提供参考。