Formaldehyde Concentrations in Wisconsin Mobile Homes

Mobile homes utilize a class of prefabricate construction techniques which rely greatly upon the use of particle board and hardwood plywood paneling for structural components. This has resulted In household sources which may emit formaldehyde into the home, since urea-formaldehyde resins are used as the bonding agent in most pressed wood stocks. A series of 137 mobile home households was investigated to determine indoor formaldehyde exposure concentrations. Homes were selected based on the estimated age of the construction components. Homes were studied serially for a nine-month period, with formaldehyde samples obtained on a monthly basis using a modified NIOSH chromotropic acid procedure. Formaldehyde concentrations were found to range from less than 0.10 ppm to 2.84 ppm. The median exposure concentration was 0.39 ppm. Analysis of variance was performed on each home to discern visit and room measurement effects. Eighty-nine percent of the homes exhibited no measurement placement effects, while only 10 percent failed to demonstrate between-visit variance effects. Regression models were constructed to predict household formaldehyde concentrations. Concentrations exhibited an inverse relationship with the age of the construction materials. A weighted least squares regression model of log of home age predicting temperature-corrected log formaldehyde explained 82 percent of the formaldehyde variation.     

Estimating contaminant mass discharge: a field comparison of the multilevel point measurement and the integral pumping investigation approaches and their uncertainties

In this field study, two approaches to assess contaminant mass discharge were compared: the sampling of multilevel wells (MLS) and the integral groundwater investigation (or integral pumping test, IPT) that makes use of the concentration-time series obtained from pumping wells. The MLS approached used concentrations, hydraulic conductivity and gradient rather than direct chemical flux measurements, while the IPT made use of a simplified analytical inversion. The two approaches were applied at a control plane located approximately 40m downgradient of a gasoline source at Canadian Forces Base Borden, Ontario, Canada. The methods yielded similar estimates of the mass discharging across the control plane. The sources of uncertainties in the mass discharge in each approach were evaluated, including the uncertainties inherent in the underlying assumptions and procedures. The maximum uncertainty of the MLS method was about 67%, and about 28% for the IPT method in this specific field situation. For the MLS method, the largest relative uncertainty (62%) was attributed to the limited sampling density (0.63 points/m(2)), through a novel comparison with a denser sampling grid nearby. A five-fold increase of the sampling grid density would have been required to reduce the overall relative uncertainty for the MLS method to about the same level as that for the IPT method. Uncertainty in the complete coverage of the control plane provided the largest relative uncertainty (37%) in the IPT method. While MLS or IPT methods to assess contaminant mass discharge are attractive assessment tools, the large relative uncertainty in either method found for this reasonable well monitored and simple aquifer suggests that results in more complex plumes in more heterogeneous aquifers should be viewed with caution.     

Acetone and 2‐butanone creation associated with biological and chemical remediation of environmental contamination

Remediating environmental contamination by either biological or chemical methods typically results in the generation of temporary chemical intermediates as part of the process. These intermediate compounds may be related to either contaminant degradation pathways or reactions generated from the amendment itself. This article summarizes previously researched pathways and representative case studies discussing the authors' experience in generating relatively high concentrations of acetone and 2‐butanone (also referred to as methyl ethyl ketone [MEK]) during both biological and chemical treatments. Experience shows that even relatively high concentrations of acetone and MEK intermediates are quickly attenuated and prove not to be a hazard outside of the treatment area. © 2011 Wiley Periodicals, Inc.     

Probabilistic impacts of climate change on flood frequency using response surfaces II: Scotland

This paper uses a sensitivity framework approach to look at the probabilistic impacts of climate change on 20-year return period flood peaks, by applying a set of typical response surfaces alongside the probabilistic UK Climate Projections (UKCP09) for 10 river-basin regions over Scotland. The first paper of the pair used the same approach for 10 river-basin regions over England and Wales. This paper develops the methodology for Scotland, by first enabling better estimation of the response type of Scottish catchments. Then, as for England and Wales, the potential range of impacts is shown for different types of catchment in each river-basin region in Scotland, and regional average impact ranges are estimated. Results show clear differences in impacts between catchments of different types and between regions. The Argyll and West Highland regions show the highest impacts, while the North-East Scotland region shows the lowest impacts. The overall ranges are generally smaller for Scotland than England and Wales.     

Realistic retrospective dose assessments to members of the public around Spanish nuclear facilities

In the frame of an epidemiological study carried out in the influence areas around the Spanish nuclear facilities (ISCIII-CSN, 2009. Epidemiological Study of The Possible Effect of Ionizing Radiations Deriving from The Operation of Spanish Nuclear Fuel Cycle Facilities on The Health of The Population Living in Their Vicinity. Final report December 2009. Ministerio de Ciencia e Innovación, Instituto de Salud Carlos III, Consejo de Seguridad Nuclear. Madrid. Available from: http://www.csn.es/images/stories/actualidad_datos/especiales/epidemiologico/epidemiological_study.pdf), annual effective doses to public have been assessed by the Spanish Nuclear Safety Council (CSN) for over 45 years using a retrospective realistic-dose methodology. These values are compared with data from natural radiation exposure. For the affected population, natural radiation effective doses are in average 2300 times higher than effective doses due to the operation of nuclear installations (nuclear power stations and fuel cycle facilities). When considering the impact on the whole Spanish population, effective doses attributable to nuclear facilities represent in average 3.5 × 10⁻⁵ mSv/y, in contrast to 1.6 mSv/y from natural radiation or 1.3 mSv/y from medical exposures.     

Pharmacokinetic model of dioxin and furan levels in adipose tissue from Sawmill work involving chlorophenate fungicides

Sawmill workers in British Columbia (B.C.), Canada, have been exposed to chlorophenate fungicides which are known to be contaminated with polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs). Due to concern about the potential of these workers to have significant body burdens of PCDD/Fs, and the absence of measurements in these worker, a single-compartment pharmacokinetic model was developed to estimate the concentration of PCDD/Fs in the fat tissue of the sawmill workers. Data from a large cohort of B.C. sawmill workers and literature-based data on chlorophenate exposures and PCDD/F concentrations in chlorophenates were used in Monte Carlo simulations to predict a PCDD/F body burden distribution. The median concentrations of HxCDF and HpCDF predicted using the model for the B.C. sawmill worker population exceeded the range measured in unexposed populations. PeCDF and OCDF concentrations exceeded the range measured in unexposed populations at the 70th percentile of the model-predicted distribution, and PeCDD at the 90th percentile. The primary limitation of the model was the scarcity of input data about actual dermal and inhalation exposures to chlorophenates.     

Effectiveness of mandatory license testing for older drivers in reducing crash risk among urban older Australian drivers

Most licensing jurisdictions in Australia maintain mandatory assessment programs targeting older drivers, whereby a driver reaching a specified age is required to prove his or her fitness to drive through medical assessment and/or on-road testing. Previous studies both in Australia and elsewhere have consistently failed to demonstrate that age-based mandatory assessment results in reduced crash involvement for older drivers. However studies that have based their results upon either per-population or per-driver crash rates fail to take into account possible differences in driving activity. Because some older people maintain their driving licenses but rarely if ever drive, the proportion of inactive license-holders might be higher in jurisdictions without mandatory assessment relative to jurisdictions with periodic license assessment, where inactive drivers may more readily either surrender or lose their licenses. The failure to control for possible differences in driving activity across jurisdictions may be disguising possible safety benefits associated with mandatory assessment. The current study compared the crash rates of drivers in Melbourne, Australia, where there is no mandatory assessment and Sydney, Australia, where there is regular mandatory assessment from 80 years of age onward. The crash rate comparisons were based on four exposure measures: per population, per licensed driver, per distance driven, and per time spent driving. Poisson regression analysis incorporating an offset to control for inter-jurisdictional road safety differences indicated that there was no difference in crash risk for older drivers based on population. However drivers aged 80 years and older in the Sydney region had statistically higher rates of casualty crash involvement than their Melbourne counterparts on a per license issued basis (RR: 1.15, 1.02-1.29, p=0.02) and time spent driving basis (RR: 1.19, 1.06-1.34, p=0.03). A similar trend was apparent based on distance travelled but was of borderline statistical significance (RR: 1.11, 0.99-1.25, p=0.07). Collectively, it can be inferred from these findings that mandatory license re-testing schemes of the type evaluated have no demonstrable road safety benefits overall. Further research to resolve this on-going policy debate is discussed and recommended.     

Phosphorus transfer in surface runoff from intensive pasture systems at various scales: a review

Phosphorus transfer in runoff from intensive pasture systems has been extensively researched at a range of scales. However, integration of data from the range of scales has been limited. This paper presents a conceptual model of P transfer that incorporates landscape effects and reviews the research relating to P transfer at a range of scales in light of this model. The contribution of inorganic P sources to P transfer is relatively well understood, but the contribution of organic P to P transfer is still relatively poorly defined. Phosphorus transfer has been studied at laboratory, profile, plot, field, and watershed scales. The majority of research investigating the processes of P transfer (as distinct from merely quantifying P transfer) has been undertaken at the plot scale. However, there is a growing need to integrate data gathered at a range of scales so that more effective strategies to reduce P transfer can be identified. This has been hindered by the lack of a clear conceptual framework to describe differences in the processes of P transfer at the various scales. The interaction of hydrological (transport) factors with P source factors, and their relationship to scale, require further examination. Runoff-generating areas are highly variable, both temporally and spatially. Improvement in the understanding and identification of these areas will contribute to increased effectiveness of strategies aimed at reducing P transfers in runoff. A thorough consideration of scale effects using the conceptual model of P transfer outlined in this paper will facilitate the development of improved strategies for reducing P losses in runoff.