A generic comparison of the airborne risks to human health from landfill and incinerator disposal of municipal solid waste

A comparison of the potential risks to human health from municipal solid waste (MSW) incineration and landfill on a generic basis is attempted. For this purpose a 'worst case' approach is adopted and a number of assumptions regarding the size and activities of each waste disposal method are made. The airborne pollutants measured for an incinerator are different from those for a landfill with or without gas collection. However, based on the available information it appears that as far as airborne pollution is concerned, landfill sites without gas collection pose a potentially higher generic risk to human health than MSW incinerators performing to Environmental Agency (UK) standards. This analysis cannot be used to replace specific evaluations for a particular incinerator or a landfill site because local conditions can have a very large impact on the magnitude of risks involved.     

Capacity for climate change planning: assessing metropolitan responses in the United States

Political inaction at the federal level in the United States has driven increased attention to the importance of planning for climate change at the metropolitan level. This study reports on a survey of 25 regional councils in the United States that measures the extent to which they have adopted climate change plans and to identify the factors that influence their ability to implement climate change initiatives. The findings revealed that a majority of regional councils are involved in planning for and seeking to reduce climate change, and that existing efforts in complementary policy domains make this involvement possible. The findings support a multi-level framework to assess the institutional capacity of regional councils to implement climate change policy and planning in a metropolitan area.     

Reductive dechlorination of a chlorinated solvent plume in Houston,Texas

Chlorinated solvents such as tetrachloroethene (perchloroethene, PCE) and trichloroethene (TCE) have been extensively used in various industrial applications for many years. Because neither are typically consumed through their various uses, they are often released to the environment through industrial application or disposal. Once released, PCE and TCE tend to migrate downward into groundwater, where they persist. In the current case study, cheese whey was used as a groundwater amendment to facilitate the reductive dechlorination of a chlorinated solvent plume underlying an auto dealer/repair shop in Harris County, Texas. From September 2010 to January 2014, over 32,000 gallons of cheese whey were injected into the subsurface resulting in a marked reduction in oxidation–reduction potential (ORP) and nitrate concentrations, coupled with an increase in ferrous iron concentrations. Statistical trend analyses indicate the primary contaminants, PCE and TCE, as well as the daughter product cis‐1,2‐dichloroethene (cDCE), all exhibited a positive response, as evidenced by statistically decreasing trends, and/or reversal in concentration trends, subsequent to cheese whey injections. Maximum concentrations of PCE and TCE in key test wells decreased by as much as 98.97 percent and 99.17 percent, respectively. In addition, the bacterial genus Dehalococcoides, capable of complete reduction of PCE to non‐toxic ethene, was found to be more abundant in the treatment area, as compared to background concentrations. Because cheese whey is a by‐product of the cheese making process, the cost of the product is essentially limited to transport. This study demonstrates cheese whey to be an effective groundwater amendment at a cost which is orders of magnitude lower than popular industry alternatives.     

Evolution and Innovation of Hydraulic Capture Analysis Methodology

An efficient program for assessing groundwater extraction system capture zones has been developed that can be run on any digitized potentiometric surface. The program was developed in response to the need to simulate particle capture by multiple remediation system elements (i.e., extraction wells, hydraulic barrier, etc.) at a hydrogeologically complex site in California (the Site). The method uses MODPATH software but does not otherwise require a groundwater model. The program called “CapZone FileBuilder” (Capture Zone File Builder) Version 1.0 was created to import digitized potentiometric surfaces and use them to create MODFLOW output files (using native USGS MODFLOW‐2005 codes). CapZone FileBuilder was created using the C# programming language with Visual Studio 2013 as the integrated development environment. The model was applied to a site that has a regulatory requirement for capture analysis as part of an annual remedy‐effectiveness evaluation for groundwater contamination. Previously, capture analysis was highly labor intensive and time consuming, performed using manual flow net analysis or calibration of highly discretized MODFLOW groundwater models. CapZone FileBuilder is now used to perform the capture analysis for this site and is universally applicable to any site with a groundwater potentiometric map. ©2017 Wiley Periodicals, Inc.     

Evaluation of a Low-Cost Transient Mass Measurement System in Vehicle Inspection and Maintenance Testing: Results of a Gordon-Darby Study

Abstract

A study was performed at a Gordon-Darby centralized inspection and maintenance (I/M) test lane in Phoenix, AZ, in December 1999 for the purpose of evaluating the accuracy of production Vehicle Mass Analysis System (VMAS) equipment relative to standard IM240 equipment. Simultaneous transient mass measurements were made on random vehicles using VMAS and IM240 systems on two test lanes during regular I/M testing. Cumulative mass emissions for 846 valid tests were correlated using least-squares regression analysis. Correlation indices were >0.99 for both carbon monoxide (CO) and nitric oxide (NO) and 0.93 for hydrocarbon (HC), and the standard errors of regression were 1.38 g/mi, 0.123 g/mi, and 0.245 g/mi for CO, NO, and HC, respectively. These strong correlation results are reflected by high excess emission identification rates of 99.4% for CO, 99.3% for NO, and 94.5% for HC when applying final IM240 cut points with a <2% error of commission for all pollutants.     

Control of Ozone Precursors in a Complex Industrial Terrain by Using Multiscale-Nested Air Quality Models with Fine Spatial Resolution (1 km2)

Abstract

The location of the northeastern Iberian Peninsula (NEIP) in the northwestern Mediterranean basin, the presence of the Pyrenees mountain range (with altitudes >3000 m), and the influence of the Mediterranean Sea and the large valley canalization of Ebro river induce an extremely complicated structure for the dispersion of photochemical pollutants. Air pollution studies in very complex terrains such as the NEIP require high-resolution modeling for resolving the very complex dynamics of flows. To deal with the influence of larger-scale transport, however, high-resolution models have to be nested in larger models to generate appropriate initial and boundary conditions for the finer resolution domains. This article shows the results obtained through the utilization of the MM5-EMICAT2000-CMAQ multiscale-nested air quality model relating the sensitivity regimes for ozone (O₃)-nitrogen oxides (NO_x)-volatile organic compounds (VOCs) in an area of high geographical complexity, like the industrial area of Tarragona, located in the NEIP. The model was applied with fine temporal (one-hour) and spatial resolution (cells of 24 km, 2 km, and 1 km) to represent the chemistry and transport of tropospheric O₃ and other photochemical species with respect to different hypothetical scenarios of emission controls and to quantify the influence of different emission sources in the area. Results indicate that O₃ chemistry in the industrial domain of Tarragona is strongly sensitive to VOCs; the higher percentages of reduction for ground-level O₃ are achieved when reducing by 25% the emissions of industrial VOCs. On the contrary, reductions in the industrial emissions of NO_x contribute to a strong increase in hourly peak levels of O₃. At the same time, the contribution of on-road traffic and biogenic emissions to ground-level O₃ concentrations in the area is negligible with respect to the pervasive weight of industrial sources. This analysis provides an assessment of the effectiveness of different policies for the control of emission of precursors by comparing the modeled results for different scenarios.     

Dechlorane plus and possible degradation products in white stork eggs from Spain

The occurrence of the emerging chlorinated flame retardant Dechlorane Plus (DP) and three of its possible degradation products was investigated in white stork eggs from two colonies in Spain. The average DP concentrations were 401 pg/g wet weight (w.w.) for the urban/industrial colony and 105 pg/g w.w. for the rural colony. One possible degradation product, anti-[DP-1Cl], was found in approximately 10% of the samples. No significant stereoisomer enrichments were detected in any colony based on the average anti-DP fractional abundances found which agrees with previous studies in herring gulls. The relationship between DP and PBDE contents in both colonies was explored leading to different scenarios, i.e. no correlation was found in the urban colony but they were statistically correlated in the rural colony. To the best of our knowledge, this is the first study to report DP in a species from a terrestrial food web, and also to report a DP degradation product in biota.     

Predominance of BDE-209 and other higher brominated diphenyl ethers in eggs of white stork (Ciconia ciconia) colonies from Spain

Polybrominated diphenyl ethers (PBDEs) are ubiquitous pollutants for which there is still a lack of knowledge about the environmental behavior and fate of the higher brominated congeners (octa- to deca-BDEs). In this study, the PBDE content and congener profiles in failed eggs from two colonies of white stork (Ciconia ciconia) in Spain were studied. The average total PBDE concentration was 1.64ng/g (wet weight, w.w.) for the rural colony and 9.08ng/g (w.w.) for the urban colony. Higher brominated BDEs dominated the congener profiles of both colonies. Of particular interest was the determination of BDE-209 as the dominant congener accounting for 44.1% and 38.6% of the total PBDE content in the rural and urban colonies, respectively. BDE-202, considered an indicator of BDE 209 debromination, was detected in 83% and all of the samples from rural and urban colonies, respectively. The observed congener profile in which BDE-207>BDE-208>BDE-206 does not correspond to any known technical PBDE mixture and is evidence for possible BDE-209 degradation.