航电电源板层间CAF短路失效机理及退化时间分析

目的 掌握CAF失效机理MTTF分析方法,以便于在实际案例中实施工程优化决策,从而降低故障危害风险和寿命周期总费用。方法 以某航电电源母板CAF失效为例,基于CAF失效机理的物理化学变化时间特性模型算法,建立电压、介质间距和MTTF变化关系,以辅助工程优化决策。结果 基于仿真计算数据,形成对特定范围产品的改进和处置决策,从而限制失效危害风险的进一步扩散,降低了产品生命周期维护费用,并提升了客户满意度。结论 掌握装备常见失效机理和采取适宜的应对措施,是持续改进装备可用性、可靠性和环境适应性的必要条件。     

新冠期间河北省典型钢铁企业大气污染影响

基于国家气象局气象预报数据,建立了基于AERMOD的钢铁企业污染预报模型,模拟了新冠疫情管控期（2020年2~3月）及解封后期（2020年4~10月）河北省某钢铁企业对大气污染的影响,并结合空气质量实测数据进行模型验证.结果显示,不利风向条件下,该钢铁厂大气污染物排放对当地3个国控站点SO₂、NO_x和PM₁₀的平均浓度贡献占比,在疫情管控期分别为20.19%~33.81%,17.49%~23.46%和2.02%~2.69%,在解封后期分别为13.43%~21.01%,11.09%~20.92%和1.20%~2.22%.由于疫情管控期受其他人为源干扰较少,该钢铁厂SO₂、NO_x和PM₁₀的预报值和三个国控站点实际监测值的相关系数,在新冠疫情管控期（在单个站点中,最高分别为0.43、0.48和0.29）高于解封后期（最高分别为0.42、0.39和0.07）.     

安全技术说明书在油田化学助剂危害因素识别中存在问题探讨

以3种化学助剂的化学品安全技术说明书(SDS)信息与气相色谱-质谱联用仪定性分析结果为对比,探讨了油田化学助剂安全技术说明书在完整性、真实性、准确性等方面存在的问题,建议完善SDS审核与监督机制,在识别有害因素时根据SDS、定性定量检测结果、生产工艺及原辅材料分析等内容做出综合判断,使用化学助剂时核实SDS准确性及化学助剂安全性,以采取正确的防控措施。     

Thermal and Mechanical Properties of Plastics Molded from Sodium Dodecyl Sulfate-Modified Soy Protein Isolates

Soybean protein is a potential material for manufacturing of biodegradable plastics. The objective of this investigation was to characterize the thermal and mechanical properties of plastics made from sodium dodecyl sulfate (SDS)-modified soy proteins. Soy protein isolate (SPI) was prepared from defatted soy flour, modified with various concentrations of SDS, and then molded into plastics. The temperatures of denaturation of the modified soy protein increased at low SDS concentration and then decreased at high SDS concentration. At the same SDS concentration, the plastics molded from the modified soy proteins showed a similar temperature of denaturation, but a lower enthalpy of denaturation compared to the modified soy protein. Young's modulus of the plastics decreased as SDS concentration increased, and the tensile strength and strain at break of the plastics reached a maximum value at 1% SDS modification. Two glass transition temperatures were identified corresponding to the 7S and 11S globulins in SPI by dynamic mechanical analysis, and they decreased as SDS concentration increased. The SDS modification increased the water absorption of the plastics.     

一株内生真菌单独及与水稻联合降解菲的研究

对一株植物内生真菌拟茎点霉(编号B3)单独降解菲的条件及与水稻联合降解菲进行了研究.结果表明,乳糖和蛋白胨浓度均为10g/L、愈创木酚作为诱导物时,B3菌株10d内对初始浓度为100mg/L菲降解率达52.54%.该菌对菲的降解与菌丝生物量、胞外木质素降解酶类无明显关系,其分泌的漆酶作用底物表现出一定的特殊性.B3菌株与其共生植物水稻联合培养有利于对菲的降解,30d后菲残留浓度仅为无菌对照组的8.40%.水稻感染内生真菌B3后对菲胁迫表现出一定的缓解作用.     

固定化反胶团漆酶及其在修复土壤DDT污染中的应用

采用吸附法将反胶团漆酶吸附在表面改性后的硅藻土上,制备固定化反胶团漆酶.探讨了反胶团漆酶固定化的影响因素及其部分酶学特性,并对其在修复土壤DDT污染中的应用进行了研究.反胶团漆酶固定化的最佳温度是35 ℃,载体硅藻土的改性剂Tween-80的加入量为硅藻土质量的15%.固定化反胶团漆酶的最适作用温度为35 ℃,最适作用pH为3.5~5.0;与游离漆酶相比,固定化反胶团漆酶的热稳定性和酸碱稳定性都显著提高.采用游离漆酶和固定化反胶团漆酶修复DDT污染土壤,游离漆酶处理中DDT总量(DDTs)的降解率为50.53%,而固定化反胶团漆酶处理中DDTs的降解率高达69.17%.固定化反胶团漆酶处理较游离漆酶处理的DDTs降解率提高了近20%.     

川中遂宁地区红层地下水水化学特征及主要离子来源分析

四川红层区居民用水主要为就近开采的地下水,水质参差不齐,研究红层地下水水文地球化学特征,对于宜井区选择,红层水源地用水安全具有重要意义。利用在遂宁船山区采集的70组浅层地下水水样,采用数理统计分析、离子比例关系等方法,分析了红层浅层地下水水化学特征及主要离子来源,研究得出:区内地下水中阴离子以HCO_3~-(164.00～571.91 mg·L~(-1))为主,其次是SO_4~(2-)(13.96～1 000.00 mg·L~(-1)),阳离子以Ca~(2+)(45.70～313.00 mg·L~(-1))为主,其中孔隙水的水化学类型主要为HCO_3,SO_4-Ca,SO_4-Mg型,裂隙水以HCO_3-Ca,Mg型与HCO_3-Ca型为主;地下水中离子成分主要由岩石风化产生,来源于地层中的方解石、白云石、石膏、芒硝等矿物的风化溶解,蒸发浓缩、地下水酸碱环境及人类活动对地下水成分造成了一定的影响;浅层地下水质量以Ⅲ～Ⅳ类为主,污染物主要为TDS、Fe~(3+)等原生污染,也存在NO_3~-、NO_2~-等人类活动污染;红层宜井区主要为平坝、丘坡坡脚及沟谷一带,为避免污染指标超标,井深不宜超过25m,远离养殖场、农厕等地下水易受人类活动污染的环境,防止鱼塘、农田等地表水进入井中。     

环氧丙烷生产废液中1,2 -二氯丙烷的回收

介绍了从环氧丙烷生产废液中回收1,2-二氯丙烷的新方法。采用常压精馏、减压精馏、共沸精馏工艺分离环氧丙烷生产废液中的1,2-二氯丙烷。实验结果显示,共沸精馏工艺的效果最好;在含有一定量的共沸剂、釜温100℃、顶温86℃、回流比为1的条件下,塔顶馏分中1,2-二氯丙烷的质量分数可达到98％以上,1,2-二氯丙烷的回收率可达到97％以上。     

Polynomial Surrogates for Open-Channel Flows in Random Steady State

Assessing epistemic uncertainties is considered as a milestone for improving numerical predictions of a dynamical system. In hydrodynamics, uncertainties in input parameters translate into uncertainties in simulated water levels through the shallow water equations. We investigate the ability of generalized polynomial chaos (gPC) surrogate to evaluate the probabilistic features of water level simulated by a 1-D hydraulic model (MASCARET) with the same accuracy as a classical Monte Carlo method but at a reduced computational cost. This study highlights that the water level probability density function and covariance matrix are better estimated with the polynomial surrogate model than with a Monte Carlo approach on the forward model given a limited budget of MASCARET evaluations. The gPC-surrogate performance is first assessed on an idealized channel with uniform geometry and then applied on the more realistic case of the Garonne River (France) for which a global sensitivity analysis using sparse least-angle regression was performed to reduce the size of the stochastic problem. For both cases, Galerkin projection approximation coupled to Gaussian quadrature that involves a limited number of forward model evaluations is compared with least-square regression for computing the coefficients when the surrogate is parameterized with respect to the local friction coefficient and the upstream discharge. The results showed that a gPC-surrogate with total polynomial degree equal to 6 requiring 49 forward model evaluations is sufficient to represent the water level distribution (in the sense of the \(\ell _2\) norm), the probability density function and the water level covariance matrix for further use in the framework of data assimilation. In locations where the flow dynamics is more complex due to bathymetry, a higher polynomial degree is needed to retrieve the water level distribution. The use of a surrogate is thus a promising strategy for uncertainty quantification studies in open-channel flows and should be extended to unsteady flows. It also paves the way toward cost-effective ensemble-based data assimilation for flood forecasting and water resource management.     

IC反应器处理MTO废水的中试研究

中试研究了内循环(IC)反应器处理甲醇制烯烃(MTO)废水的启动和运行过程,同时考察了颗粒污泥的性状及沼气产量的变化情况。试验过程运行稳定,系统抗冲击性强。以絮状污泥为接种污泥,经过131 d的启动和运行,IC反应器的COD去除负荷可达10 kg/(m~3·d)以上,COD去除率可达90%以上。IC反应器中的成熟颗粒污泥形状规则、密实、粒径大、沉降速率快。IC反应器的沼气产量符合理论预期。