Investigation of Nanoparticle Additives to Biodiesel for Improvement of the Performance and Exhaust Emissions in a Compression Ignition Engine

Worldwide energy demand has been growing steadily during the past five decades and most experts believe that this trend will continue to rise. The amount of emitted harmful emission gases increases in parallel with increasing energy consumption. This increase has forced many countries to take various precautions, and various restrictions on emitted emissions have been carried. In this study, effects of addition of oxygen containing nanoparticle additives to biodiesel on fuel properties and effects on diesel engine performance and exhaust emissions were investigated. Two different nanoparticle additives, namely MgO and SiO₂, were added to biodiesel at the addition dosage of 25 and 50 ppm. Fuel properties, engine performance, and exhaust emission characteristics of obtained modified fuels were examined. As a result of this study, engine emission values NO_x and CO were decreased and engine performance values slightly increased with the addition of nanoparticle additives.     

Determination of heavy metal levels in water, sediment and tissues of tench (Tinca tinca L., 1758) from Beyşehir Lake (Turkey)

In the present study, some heavy metals (Cu, Fe, Zn and Mn) were seasonally determined in water, sediment and some tissues of fish Tinca tinca from Bey?ehir Lake, which is an important bird nesting and visiting area, a water source for irrigation and drinking. In the water, Fe has the highest concentrations among the studied metals. Generally, the metal concentrations increased in the hottest period decreased in warm seasons. Results for levels in water were compared with national and international water quality guidelines, as well as literature data reported for the lakes. Fe was the highest in sediment samples, also Cu and Zn were the highest in spring, while Fe and Mn were in autumn. Among the heavy metals studied, Cu and Mn were below the detection limits in some tissues. Generally, higher concentrations of the tested metals were found in the summer and winter, compared with those during the autumn and spring seasons. High levels of heavy metals were found in liver of T. tinca, while low levels in muscle samples. Metal concentrations in the muscle of examined fish were within the safety permissible levels for human consumption. The present study shows that precautions need to be taken in order to prevent further heavy metal pollution.     

Conjoint analysis for environmental evaluation

BACKGROUND, AIM AND SCOPE: Conjoint analysis and the related choice-modelling methods have been used for many years in marketing research to evaluate consumer behaviour and preferences for different kinds of product attributes. Recently, the number of applications in environmental science and management has started to grow. Conjoint analysis is found in many different forms, and the environmental studies evaluated in this review display the same range of methods as in other fields. The key characteristic of all these methods is that trade-offs are evaluated by jointly considering a number of important attributes. MAIN FEATURES: This paper is a review of the literature on environmental applications of conjoint analysis and assesses in which environmental area conjoint analysis has been most successful. The method and the design of the studies are reviewed as well. RESULTS: A total of 84 studies were found, dealing with environmental issues that were evaluated by conjoint analysis. The studies concern agriculture, ecosystem management, energy, environmental evaluation, forestry, land management, pollution, products, recreation, environmental risk analysis and waste management. DISCUSSION: Choice experiments seem to have a comparatively stronger position in environmental studies than elsewhere. Most of the environmental applications are related to natural resource management. This is somewhat surprising, but a number of reports have appeared also on product evaluation, which could be a key application area in the future. CONCLUSIONS: Compared to marketing and transportation, the number of environmental conjoint studies is rather small but increasing, and the method has proven to work effectively in eliciting preferences on environmental issues. In environmental issues, experimenters often use choice experiments, especially concerning ecosystem management and environmental evaluations. When it comes to evaluating preferences concerning agriculture, forestry, energy and products, a more traditional approach of conjoint analysis is favoured. RECOMMENDATIONS AND PERSPECTIVES: Two new areas of application are identified in this review--environmental communication and expert elicitation. Conjoint analysis can thus be developed into a useful instrument for environmental risk analysis and communication, both of which are necessary for an efficient approach to risk governance.     

Development of SuperSmart Grids for a more efficient utilisation of electricity from renewable sources

If Europe is serious about reaching its target to keep global mean temperature increase below 2 °C, it must strive for a 100% renewable electricity system by 2050. The SuperSmart Grid approach combines what is often perceived as two exclusive alternatives: wide area power generation and decentralised power generation. We argue that by combining these, in fact, complementary measures, it is possible to address the crucial issue of renewable generation—fluctuating supply—in a comprehensive as well as in a technologically and economically viable manner. Thus, the SuperSmart Grid simultaneously can contribute to energy security, climate security, social security, and national security.     

Interactions between metals accumulated in the narrow-clawed crayfish Astacus leptodactylus (Eschscholtz, 1823) in Dikilitaş Lake,Turkey

The accumulations of Al, Cd, Cr, Cu, Fe, Ni, Pb and Zn in the exoskeleton, gills, hepatopancreas and abdominal muscles of crayfish Astacus leptodactylus (Eschscholtz, 1823) were determined. The strongest correlation observed was between Cr and Ni in the gills (r?=?0.904); moderate to strong correlations between Al, Cr, Fe, Ni and Cu were also observed in gill tissue. Disregarding the gills, the strongest correlation was found between Cu and Zn in the hepatopancreas (r?=?0.808); the correlation between these two metals might have been a result of metallothionein activity. The accumulation of Pb was found to correlate with that of Cd in the exoskeleton, Cd and Zn in the gills, Zn and Cu in the hepatopancreas and Cu in the abdominal muscle. None of these correlations were present in lakewater and sediment samples, suggesting that the crayfish metabolism may be responsible for the co-accumulation of metal–metal pairs. As all correlations in non-gill tissues are observed between divalent metals, a shared transporter such as divalent metal transporter 1 might be involved in the accumulation of these metals.     

Methods for synthesis of nonabromodiphenyl ethers and a chloro-nonabromodiphenyl ether

Polybrominated diphenyl ethers (PBDEs) have been used extensively as brominated flame retardants (BFRs) in textiles, upholstery and electronics. They are ubiquitous contaminants in wildlife and humans. A low concentration of nonabrominated diphenyl ethers (nonaBDEs) is present in commercial DecaBDE and they are also abiotic and biotic debromination products of decabromodiphenyl ether (BDE-209). The objective of the present work was to develop methods for synthesis of the three nonaBDEs, 2,2',3,3',4,4',5,5',6-nonabromodiphenyl ether (BDE-206), 2,2',3,3',4,4',5,6,6'-nonabromodiphenyl ether (BDE-207) and 2,2',3,3',4,5,5',6,6'-nonabromodiphenyl ether (BDE-208), with the intention of making them available as authentic standards for analytical, toxicological and stability studies, as well as studies regarding physical-chemical properties. Two methods were developed, one based on perbromination of phenoxyanilines and the other via reductive debromination of BDE-209 by sodium borohydride followed by chromatographic separation of the three nonaBDE isomers formed. An additional nonabrominated compound, 4'-chloro-2,2',3,3',4,5,5',6,6'-nonabromodiphenyl ether (Cl-BDE-208), was also synthesized in the present work. Cl-BDE-208, prepared by the perbromination of 4-chlorodiphenyl ether, may be used as an internal standard in analysis of highly brominated diphenyl ethers. BDE-206, BDE-207, BDE-208 and Cl-BDE-208 were characterized by 1H NMR, 13C NMR, electron ionization mass spectra and by their melting points. The structures of all three nonaBDEs have been characterized previously by X-ray crystallography.     

Climate Policy to Defeat the Green Paradox

Carbon dioxide emissions have accelerated since the signing of the Kyoto Protocol. This discouraging development may partly be blamed on accelerating world growth and on lags in policy instruments. However, it also raises serious question concerning whether policies to reduce CO₂ emissions are as effective as generally assumed. In recent years, a considerable number of studies have identified various feedback mechanisms of climate policies that often erode, and occasionally reinforce, their effectiveness. These studies generally focus on a few feedback mechanisms at a time, without capturing the entire effect. Partial accounting of policy feedbacks is common in many climate scenarios. The IPCC, for example, only accounts for direct leakage and rebound effects. This article attempts to map the aggregate effects of different types of climate policy feedback mechanisms in a cohesive framework. Controlling feedback effects is essential if the policy measures are to make any difference on a global level. A general conclusion is that aggregate policy feedback mechanisms tend to make current climate policies much less effective than is generally assumed. In fact, various policy measures involve a definite risk of ‘backfiring’ and actually increasing CO₂ emissions. This risk is particularly pronounced once effects of climate policies on the pace of innovation in climate technology are considered. To stand any chance of controlling carbon emissions, it is imperative that feedback mechanisms are integrated into emission scenarios, targets for emission reduction and implementation of climate policy. In many cases, this will reduce the scope for subsidies to renewable energy sources, but increase the scope for other measures such as schemes to return carbon dioxide to the ground and to mitigate emissions of greenhouse gases from wetlands and oceans. A framework that incorporates policy feedback effects necessitates rethinking the design of the national and regional emission targets. This leads us to a new way of formulating emission targets that include feedback effects, the global impact target. Once the full climate policy feedback mechanisms are accounted for, there are probably only three main routes in climate policy that stand a chance of mitigating global warming: (a) returning carbon to the ground, (b) technological leaps in zero-emission energy technology that make it profitable to leave much carbon in the ground even in Annex II countries and (c) international agreements that make it more profitable to leave carbon in the ground or in forests.     

Effect of Aging on Brain Injury Prediction in Rotational Head Trauma—A Parameter Study with a Rat Finite Element Model

Objective: The aim of this study was to investigate the possible effects of age-related intracranial changes on the potential outcome of diffuse axonal injuries and acute subdural hematoma under rotational head loading.

Methods: A simulation-based parametric study was conducted using an updated and validated finite element model of a rat head. The validation included a comparison of predicted brain cortex sliding with respect to the skull. Further, model material properties were modified to account for aging; predicted tissue strains were compared with experimental data in which groups of rats in 2 different lifecycle stages, young adult and mature adult, were subjected to rotational trauma. For the parameter study, 2 age-dependent factors—brain volume and region-specific brain material properties—were implemented into the model. The models young adult and old age were subjected to several injurious and subinjurious sagittal plane rotational acceleration levels.

Results: Sequential analysis of the simulated trauma progression indicates that an increase in acute subdural hematoma injury risk indicator occurs at an early stage of the trauma, whereas an increase in diffuse axonal injury risk indicators occurs at a later stage. Tissue stiffening from young adult to mature adult rats produced an increase in strain-based thresholds accompanied by a wider spread of strain distribution toward the rear part of the brain, consistent with rotational trauma experiments with young adult and mature adult rats. Young adult to old age brain tissue softening and brain atrophy resulted in an increase in diffuse axonal injuries and acute subdural hematoma injury risk indicators, respectively.

Conclusions: The findings presented in this study suggest that age-specific injury thresholds should be developed to enable the development of superior restraint systems for the elderly. The findings also motivate other further studies on age-dependency of head trauma.     

Determining Ecoregions for Environmental and GMO Monitoring Networks

A representative environmental monitoring network at the regional scale cannot use raster-based or random sampling designs, but requires a stratified sampling procedure integrating different information layers, and it has to occur in ecologically differing homogeneous regions (ecoregions). These we have determined using a set of spatial strata with ecological variables which we analysed with classification and regression trees (CART). We present a framework for environmental monitoring, that covers different scales, and we transfer the framework to a potential GMO (genetically modified organisms) monitoring network. We use ecoregion and other environmental strata together with existing environmental monitoring networks to determine GMO monitoring sites more precisely.